Canjing BP2211B Multi Media CD Player User Manual

Canjing BP2211B Multi Media CD Player

Product Features

Accessories

Buttons Instruction

1. Standby
2. Sleep Timer
3. Setting MODE
4. Previous
5. Pause/Play
6. Stop
7. Next
8. VOL +
9. VOL –
10. Repeat
11. CD Cover Open
12. DC Charging Port
13. Power on/off
14. Earphone /AUX OutPort
15. AUX In Port
16. USB Port

Remote Control

Button Operation

STANDBY
Please first turn the power switch next to the charging port to “ON”, then click the “standby” button on the remote control or the player to perform standby/open.

Number Pad (10+)
Press this button to enter the 10+ songs suchas10,20,30, etc.

PLAY/PAUSE
Press the PAUSE button to pause playback; Press it again to continue playing from where it was paused.

STOP

• Press the STOP button to stop playback.
• Press the PLAY Button to play from the beginning.

MUTE
Press to mutes the audio output on the player.

VOL+/VOL-
Press to increase or decrease the volume output.

MODE
Press to change the playing mode.

AUX IN
Connect it with the AUX output device(such as DVD player, CD player or Mobile phone etc) via AUX cable.

SLEEP
Press the “SLEEP” button in turn, the screen will display 30-60-90-120-OFF, numbers indicate the player will be on standby after corresponding minutes, and the “OFF” indicates the sleep function is turned off. You can also long- press the “ ” button on the remote control to set the sleep time.

Basic Operation

How to turn on/turn off the player

• The power switch is located on the side. Please toggle it to the ON position to play normally.
• The power switch is located on the side. Please toggle it to the OFF position to turn it off.

How to charge for the player
Connect the supplied USB charging cable with the power adapter, then plug it into a power source to charge the player. OR Connect the supplied USB Charging cable to a car charger/power bank to charge it. Charging Time: It will take about 3 hours for a full charge. The red light will light up when charging, and it will turn off after charging is complete.

NOTE: When the player is in low battery, the LCD screen will be flashing. Please charge it.

How to setup the repeat mode
Each time the REPEAT button on the mote control is pressed, the order of the tracks played will be as follows: Repeat1(REP1), Repeat all(ALL), random play(SHUF),Play first 10s of file(INTRO).

How to setup EQ effect
Press the EQ button to change the different sound effects. There are a total of 5 sound effects: BBS, POP, JAZZ, ROCK, and CLASSIC.

A-B Repeat(Press the “A-B” button on the remote)

• A. During playback press the first time “A-B” to set the Starting Point A.
• B. Press “A-B” a second time to set the Ending Point B and the player will repeatedly play the part between Point A and Point B.
• C. Press “A-B” a third time to cancel “A-B” repeat and resume normal playback.

Bluetooth Mode Instructions

1. Press the “MODE” button to switch to Bluetooth mode, the “bt” will be shown on the LED display, then the unit will be ready to pair other Bluetooth devices such as mobile phone, pads etc.
2. Activate the Bluetooth in your mobile phone and it will automatically search for nearby Bluetooth devices to pair.
3. Choose the name ” BP2211 ” device in your mobile phone Bluetooth device list to pair.
4. Your mobile phone will be paired/connected to the CD player in a few seconds.
5. Playing music on your mobile phone and the audio will be transmitted to the CD player speaker through bluetooth.

Note: This Player isn’t compatible with Bluetooth headsets, Bluetooth speakers, and the Car’s Bluetooth.

USB Mode Instructions

1. Plug in a USB flash drive to the CD player USB port.
2. Press the “MODE” button to switch to USB mode.
3. The CD player will read and play the music in the USB flash drives automatically.

Note

1. Supports a maximum 32GB USB flash drive, which must be in FAT32 format.
2. If can’t read the USB flash drives, please check the format and capacity. If not in FAT32 format, please format it to FAT32.

AUX Connection

1. Press the “MODE” button to select the AUX mode.
2. Use the AUX cord to connect to other devices which have the AUX OUT function.

FM Mode Instructions

1. Press the “MODE” button to switch to FM radio mode.
2. Press the “ ” button to go to auto searching, the channels will be automatically stored when searching channels.
3. After auto searching finished, press the button to adjust channels.

Note: the channel storage capacity is 40 channels. P1-P40)

BT TX
The Bluetooth transmitter function is used to connect devices such as Bluetooth stereo and Bluetooth headsets, please make sure they are in pairing status before connecting, otherwise, they will not be connected.

1. Press the BT TX button of the remote control and the Bluetooth icon of the player will flash and enter the auto search state.
2. After successfully connecting the Bluetooth device, the Bluetooth icon will always be on, and the player’s speaker will be turned off at this time.
3. When several Bluetooth devices are waiting to be connected nearby, the player will automatically select the one with the best signal to connect, if you need to connect to a specific device, you can turn off the other devices that do not need to be connected.
4. Bluetooth transmitter function is supported in CD, USB, and FM mode, but not in AUX and Bluetooth audio mode.

Troubleshooting

If you have any questions about the products you received, please feel free to contact us via email.

E-Mail: customerservice_f@163.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>