Lexman 85089425 Legrand Earthed Socket Outlet Instruction Manual
- July 29, 2024
- lexman
Table of Contents
ONNECTED SOCKET WITH EARTH
230V 16A
LUMIA
85089425
EAN:3276007429114
Instructions Manual
Original Instructions
85089425 Legrand Earthed Socket Outlet
WARNINGS
DANGER OF ELECTRIC SHOCK
BEFORE INSTALLATION, MAKE SURE YOU HAVE DISCONNECTED THE POWER SUPPLY,
OTHERWISE THERE IS A RISK OF ELECTROCUTION
Switch off the power supply directly from the electrical box, to avoid any
risk of electrocution. This module is designed for use under live voltage
conditions, improper installation may result in fire or electric shock. If you
are not comfortable with electrical installations, please consult a
professional.
The module must be installed and connected in accordance with the instructions
in this manual.
We cannot be held responsible for any accident or damage caused by not
following the installation instructions.
Switch off the power supply before carrying out any operation and do not make
any changes if the LED is lit.
PRECAUTIONS FOR USE
– Keep the unit away from equipment that may cause interference (microwave,
refrigerator, metal objects, etc.).
– The device is designed for indoor use only.
– Do not install in a humid area, avoid contact with liquids.
– Do not install near heat sources, do not expose to direct sunlight.
– Use only the accessories recommended or supplied with the unit.
– Keep out of reach of children.
– Comply with the restrictions related to the use of the radio bands provided
by the standards in force in the country of use.
SPECIFICATIONS
«Connected socket that can be controlled by wireless lighting control and/or
remotely by smartphone via the ENKI application.
Allows instantaneous and cumulative consumption of the connected appliance to
be measured and displayed on the ENKI app.
Integrated overload protection for added safety.
| Power supply | 110/230V ~ |
|---|---|
| Current | 16A |
| Power | 3680 W |
| Frequency | 50/60HZ |
| Standby consumption | 0,1 MA |
| Radio protocol | IEEE 802.15.4 |
| Frequency band used | 2400.0 – 2483.5 MHZ |
| Maximum radio power | 100 MW |
| Operating temperature | +5° C À + 45° C |
| Protection class | IP21 |
| Dimensions | 85mm (l) x 85mm (L) x 51mm (h) |
Adeo Services declares that the radio equipment bearing the reference mentioned on the first page of this document, is in conformity with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following web address: www.product- regulatory.adeoservices.com
INSTALLATION
-
Strip the wires as indicated on the leaflet.
-
Turn off the circuit breaker
-
Make the connection according to the wiring diagrams.
-
Install in a flush-mounted box using screws.
-
Turn the circuit breaker back on.
-
Proceed with pairing by following the steps in «Pairing the product to the ENKI network».
(The LED should flash red to indicate that the product requires pairing.)
Make sure that the Wi-Fi frequency of your internet router is 2.4GHz.
6.1 – Open the ENKI app and sign in.
6.2 – In the “my objects” tab, click the “+” button
6.3 – Follow the instructions on the application screens.
THE ENKI App will automatically recognize your object -
Re-clip the plate.
RESETTING THE RECIEVER
To remove the receiver from its network, do a Reset of the receiver (see «procedure for resetting the receiver») or via the Enki Application.
- Remove the cover and socket.
- Insert a thin pin (paperclip type) into the reset hole and press the button for 20 seconds. The LED will light up red briefly, release the button, the LED should light up steady red indicating that the product requires pairing. The LED should flash red to indicate that the product requires pairing.
Electrical products must not be disposed of with household waste. They must be taken to a dedicated collection point for environmentally-friendly disposal in accordance with local regulations. Contact your local authorities or retailer for information on recycling. Packaging materials are recyclable. Dispose of packaging materials in an environmentally-friendly way, and make them available to the recycling collection service. Do not dispose of batteries and disused appliances with household waste. The hazardous substances they may contain can damage your health and the environment. Have these appliances taken back by your retailer, or use the recycling facilities provided by your local authorities.
Made in France
ADEO Services 135 Rue Sadi Carnot – CS 00001 – 59790 RONCHIN – France