Lexman CS 00001-59790 Air Extractor Switch Installation Guide
- June 12, 2024
- lexman
Table of Contents
Lexman CS 00001-59790 Air Extractor Switch
Product Information
- Product Name: AIR EXTRACTOR SWITCH
- Manufacturer: ADEO Services
- Country of Origin: France
- Guarantee: 5 years
Product Usage Instructions
- Unclip the cover plate if it is pre-mounted (for claw fastening unclip the key and mount the claws on the mechanism support).
- Insert the stripped wires into the terminal blocks according to the wiring diagram (for other types of wiring, refer to the diagram mentioned in the CMV manual).
- Secure the mechanism with the screws provided on the back box.
- Clip on the cover plate.
- Turn on the power and test the product : 1 – Low speed / 2 – High speed If the controls are reversed, cut off electricity, swap the phase and phase reversal wires coming from the motor (a, b).
Note: This product must be installed according to installation
regulations, preferably by a qualified electrician.
Improper installation and usage may result in electric shock or fire. Do not
open, disassemble, modify, or change the device unless explicitly specified in
the instructions.
This product must be installed according to the installation rules and
preferably by a qualified electrician. Improper installation and use may
result in a risk of electric shock or fire. Do not open, disassemble, alter or
modify the product unless specifically stated in the instructions. This
product is marked with the waste electrical and electronic equipment (WEEE)
symbol. This means that this product must be treated in accordance with the
European Directive 2012/19/EU for recycling or disassembly to minimize its
impact on the environment. The user may choose to give the product to a
competent recycling organization or to the retailer who sold him new
electrical or electronic equipment.