HOMES S26S Multifunctional Wireless Charger Instruction Manual

MULTIFUNCTIONAL WIRELESS CHARGER
SPEAKER +NIGHT LIGHT+CLOCK PRODUCT INSTRUCTIONS

Thank you so much for choosing our product, please read the manual carefully before using the product.

Featureds

• Simple and exquisite shape.
• Night light.
• Clock alarm.
• Wireless fast charge.
• Speaker
• Charging distance<6mm.

APPERANCE BUTTONS

1. Clock display area
2. Lampshade
3. Light adjustment touch switch
4. Wireless charging device induction area
5. Wireless charging indicator
6. Clock charging indicator
7. Charging contacts
8. Stereo
9. Backplane Type-C input interface
10. Tap light Type-C input interface
11. Silicone non-slip mat

OPERATION METHOD

1. Connect the USB port of the USB data cable to the power adapter, and the Type-C port to the wireless charger.
2. Align the positive and negative charging contacts at the bottom of the clock with the positive and negative pins of the bottom plate, the charging indicator is always on, and the product enters the charging state.
3. Put the required wireless charging device in the charging indicator area of this product, the charging indicator is always on, and the wireless charging enters the charging state.

FUNCTIONAL ANALYSIS

Night light function

• The first gear of the touch switch is 50% brightness warm white.
• The second gear of the touch switch is 100% brightness warm white.
• The third gear of the touch switch s seven-color light.
• Touch the switch to turn off the light for the fourth time.
• Turn on the lights in a cycle.

CLOCK BUTTON FUNCTION

CLOCK SETTING

Under the clock display mode:

1. Short press the clock willflash to enter the setting mode.
   Short press ( ) to set hours; long press ( )to quickly set the hours.
   Short press ) to set minutes; long press ) to quickly set minutes.
   After finishing setting, short press to save the current setting.
   2. Long press to switch to 12/24 H mode

ALARM CLOCK SETTING

1. Short press to turn on or off alarm 1/alarm 2/ in sequence.
2. Long press   the clock and alarm icons will flash and enter the alarm 1/alarm 2 settings.
   + Short press to set the hour, long press to quickly set the hour.
   «Short press   o adjust the minute; long press to quickly adjust the minute.
   « After finishing setting, long press to save the current setting.

Adjust the volume of the alarm clock
When the alarm rings, short press to reduce, and short press to increase volume.

Side touch function of the clock

• Short touch side to adjust the brightness of the clock;
  When the alarm goes off, tap the side to snooze for 5 minutes and you can enjoy 4 times snooze mode:

• Long touch the side to stop the current alarm.

APPLICABLE DEVICE

This product supports fast wireless charging, which complies with the Qi wireless charging standard; it realizes short-distance wireless power transmission through magnetic induction. This device supports all wireless charging devices that meet the QI standard. When using a 5V output adapter , Wireless charging supports 5W load. When using an adapter that meets QC2.0 and above standards, the wireless charging supports 10W load; Support overcharge protection (9V) and overcurrent protection (2A)

ATTENTION POINTS

• Do not use or store the product in direct sunlight or high temperature places for a long time.
• Do not charge in places too close to magnetic cards, magnetic recording media, and precision instruments.
• Do not disassemble or modify this product
• Do not touch the AC adapter with wet hands.
• Keep this product away from water or other liquids.
• If you want to clean the product, please disconnect the power.
• Product working environment temperature range: -20~45°C.

SPECIFICATIONS

Product Material: imported ABS +hardware
Power Input: DC5V/3A 9V/2.1A
Charging Efficiency: 75%
Power: 5W/7.5W/10W/15W
Speaker Power: 405W
Battery Capacity: 1200mAh
Product Weight: 575.45G
Product Size: 178x154x103mm
The power charging port is an international universal Type-C port

WARNING

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  This equipment must be installed and operated with aminimum distance of 15 cm between the radiator and user body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>