HOMES Kamm Traditional 7-Drawer Wood Dresser Instruction Manual
- May 15, 2024
- HOMES
Table of Contents
HOMES Kamm Traditional 7-Drawer Wood Dresser
TOOLS REQUIRED
- Allen Wrench (Included)
- Phillips Screwdriver (Not Included)
- 2 – People Recommended
ASSEMBLY RATING 
The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING
-
Are you missing anything?
Double-check all parts, hardware and accessories listed on Page 6 are accounted for. -
Should we send any replacements?
Are there any irregularities or flaws in the parts? We can send replacements! -
Check out our Quick Tips!
We recommend reviewing the pre-assembly handouts. Even experts need a refresher now and then! -
Prep Time!
Please review the assembly instructions and all diagrams prior to assembling. Arrange parts as recommended on Page 7 and group identical hardware together to make assembling easier.
PRE ASSEMBLY INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process.
-
Teamwork
ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. -
Suitable Location
Assembling near the area of the intended location is highly recommended. -
Sufficient Space
Make sure you have enough space to move around during the assembly
Avoid Scratches
Use cardboard, blankets or a carpeted area while assembling furniture to prevent scratches. -
Flat Surface
Make sure the furniture rests on a flat and level surface with each leg evenly touching the floor.
ASSEMBLY AND CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY (M) RESULT IN INJURY AND/OR
PROPERTY DAMAGE.
IT IS THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY
LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO
SUPPORT ITS
INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERI OUS
INJURY.
DRESSER & MIRROR
PARTS
HARDWARE
- Lock Washer
- Aller•Wrench M4
- Anti Tip Kit
packed in 2 cases
ASSEMBLY INSTRUCTIONS
Attach bun feet (#3) and support leg (#4) to the dresser (#2). 
Align mirror supports (#5) to the mirror (#1) and dresser (#2), then secure by using bolts (#A) with washers (#B,C).
Hardware x1 Set
ASSEMBLY COMPLETED
Please ensure the furniture rests on an even and flat surface. If the product
wobbles or feels loose, double-check all bolts and/or screws are properly
tightened and secured.
Keep this handy!
Please retain this instruction manual and any order-related information for
future reference.
Lift, don’t drag!
To avoid damage to product please always LIFT the product when transporting of
adjusting the placement.
ASSEMBLY INSTRUCTIONS
Wall Mounting and Fixing
EXPANSION WALL ANCHOR
Our provided expansion wall anchors are only suitable for masonry walls, such
as drywall, plaster or concrete, and are best for holding lightweight items or
for anti-tip prevention. If you are unsure of the correct wall anchor to use
with the product, please request professional guidance. liability for product
damage or failure due to using the incorrect anchors will fall on the
installer.
CHECK BEFORE PROCEEDING
Prior to drilling or hammering, please check for wires or pipes. We recommend
using a stud finder to locate a stud, which will offer more appropriate
resistance and hold more weight.
QUICK TIPS
- lf unsure of the proper size, always choose a larger screw and wall anchor.
- Match the drill bit to the wall anchor and hole size.
- Only drill horizontally. Do not force the drill or enlarge the hole for the wall anchor.
- Take extra care when drilling into high walls or ceramic tiles. Wall anchors should be a tight fit for the hole. Never use wall anchors in ceilings.
MAINTENANCE
We recommend a yearly check to see if the wall anchor or screw has loosened.
If so, please remove the existing wall anchor and screw, and use a new anchor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>