Midea MDRC152FEE Chest Freezer User Manual

Midea MDRC152FEE Chest Freezer User Manual

USER MANUAL
MDRC152FEE MDRC207FEE
MDRC280FEE MDRC345FEE
MDRC405FEE MDRC564FEE

Warning notices: Before using this product, please read this manual carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.

THANK YOU LETTER

Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.

SPECIFICATIONS

PRODUCT OVERVIEW

Names of components

1. Door handle(optional)
2. Lamp (optional)
3. Shelving basket (optional)
4. Power cord
5. Shutter
6. Temperature control panel
7. Drainage hole
8. Cabinet

ATTENTION
Images shown here are intended as examples only.

PRODUCT INSTALLATION

Install Instruction

For refrigerating appliances with climate class

• Depending on the climate class, this refrigerating appliance is intended to be used at ambient tempreatures range as specified following table.
• The climate class can be found on the rating plate. The product may not operate properly at temperatures outside of the specific range.
• You can find the climate class on the product label.

Effective temperature range

• The product is designed to operate normally in the temperature range specified by its class rating.

Dimensions and Clearances

• Too small of a distance from adjacent items may result in the degradation of freezing capability and increased electricity costs. Allow over 100 mm of clearance from each adjacent wall when installing the appliance.

**ATTENTION**
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.

Connecting the appliance

After installing the appliance, connect the power plug into a socket outlet.

1. Open the cover plate from the side with the tool.
2. Open the cover plate, take out the power cord, and then cover the cover plate.

**ATTENTION**
After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you put food into the appliance. If you add food before the appliance has cooled completely, your food may spoil.

Changing the light (optional)

• Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent or similar qualified person.

OPERATION INSTRUCTIONS

Control panel

Operation key and lamp

1. High temperature warming indicator lamp
2. Super-freeze indicator lamp
3. Centigrade temperature indicator lamp
4. Fahrenheit temperature indicator lamp
5. Super-freeze key
6. Super-freeze key

A. Indicator lamp display area
B. Temperature display area

Display control

• When power on the freezer, the display window will be on for 3s, and then it will enter normal operation display, the original electrified display shall be under 18°C
• Display of normal operation:
  1. If there is no failure, the set temperature or function mode will be displayed;
  2. If there is any failure, the failure code will be displayed;

Show sleep function:

• The sleep function will open by default after electrifying, after the temperature is confirmed, the display will extinguish after another 30s. The sleep mode could be switched via combined key:
• By pressing tempering key” ” and super-freeze key” ” for 5s simultaneously, when “ON” is displayed in the temperature display area once, it indicates the sleep function is opened.
• By pressing tempering key ”  “and super-freeze key”  “for 5s simultaneously, when” OF ” is displayed in the temperature display area once, it indicates the sleep function is closed.

Operation control:

• Open the sleep function. After temperature confirmation for tempering every time, the display area will extinguish for another 30s,
• Close the sleep function. After temperature confirmation for tempering every time, the display area will not extinguish and keep on.

Lock/Unlock

After the initial electrification, the key is in lock state by default; it is required to operate after unlocking.

• Lock: after pressing the super-freeze key”  ” for continuously 3s, the display area will blink once, and the set temperature will take effect immediately, once entering lock state, the display area will not blink; after no-key operation for 30s, it could also enter automatic lock state, and the display area will blink once.
• Unlock: after pressing the super-freeze key”  ” for continuously 3s, the display area will blink once to unlock. Under the lock state, it is required to conduct key operation after unlock.

IMPORTANT:
The various following key operations shall be implemented under unlock state

Fahrenheit and centigrade temperature conversion

• By long pressing the tempering key “  ” for 3s, Fahrenheit and centigrade temperature conversion could be implemented. When the centigrade temperature is displayed, the centigrade temperature indicator lamp on; and when the Fahrenheit temperature is display, the Fahrenheit temperature indicator lamp in the display area will be on.

Temperature Setting

• By pressing the tempering key “ ”, the display window will display the refrigerator temperature, by pressing the tempering key“ ”once every time, the refrigerator temperature will change 1 degree Celsius/Fahrenheit;

**ATTENTION**
For settings of -30°C/-22°F, an ambient temperature of 25°C/77°F or less is recommended

The specific temperature change is cycled according to the figure below:

Fahrenheit temperature setting scope:

Super-freeze function
Enter super-freeze:
By pressing the super-freeze key “ ”, the super-freeze indicator lamp “ ” will be on;

When setting the centigrade temperature, “ -30 ” will be displayed in the temperature display area, if the compressor continuous operates, the centigrade temperature indicator lamp “ ℃ ” will be on.

When setting the Fahrenheit temperature, “ -22 ” will be displayed in the temperature display area, if the compressor continuous operates, the Fahrenheit temperature indicator lamp “ ℉ ” will be on.

Quit super-freeze:

1. Power on after power failure;
2. Continuous operation of compressor for 24 hours;
3. If sensor failure occurs under super-freeze mode, you can quit super-freeze;
4. Under super-freeze mode, you can quit the super-freeze mode by repressing the super-freeze key “ ”.

High temperature alarm

• The indicator lamp “ ” will be on for high temperature alarm.

Power failure memory

• During power failure, the sudden operating state of power failure will be locked, after power is recovered, the operation shall be continued according to the setting before the power failure. The super-freeze function will be quitted after power failure.

Failure code

• If the failure happens, the display area will show corresponding error codes as shown as below table, the user shall contact a specialist for maintenance, so as to make sure the normal use of freezer.

Tips on storing food

• The low temperature of freezer may keep food fresh for a long time and it is mainly used to store frozen foods and making ice.
• The freezer is suitable for storage of meat, fish, shrimp, pastries class and other foods not to be consumed in short term. Do not store fluids in bottled or closed containers Items such as bottled beer, beverages, etc.
• It is not suitable to store bottled or closed containers of fluid items for a long time, if you want to store bottled or closed containers of fluid items, the stored items should not be close to the wall of the freezer.
• There is a certain deviation between the temperature inside the box and the actual setting temperature, which does not affect normal use.
• Please be noted food shall be consumed within the shelf time.
• The fast-freezing function is designed to maintain the nutritional of the food It can quickly freeze the food in a short time. If a large amount of food need to be frozen at one time, it is recommended that users turn on the fast- freezing function 5 hours in advance. In this case, freezing speed of the freezer increases, it can quickly freeze food and effectively keep the food nutrition.

ATTENTION

• After long term using, there maybe a certain degree of wear with the hinge, it will cause the noise when open lose the door and reduce the service life of ninge.It is recommended to put the grease on hinge for maintenance regularly, it can effectively eliminate noise and extend the service life of the hinge.
• The weight of the objects in the basket should not exceed 5kg.
• If the product is packaged in thin film, there may be condensation on the surface of the box and the film when the temperature and humidity of the transportation environment change rapidly. This phenomenon is a normal physical phenomenon, does not affect the use of the product.

CLEANING AND MAINTENANCE

Your freezer is designed for year-round use and requires minimal cleaning and maintenance. To keep your freezer running efficiently and odor free, we recommend that you clean the freezer regularly

Defrost

Freezer shall be manually defrosted.

• Unplug the freezer and open the freezer door, remove foods and shelving basket before defrosting;Open the outflow hole and drainage hole (and place water container at the outflow hole); indoor frost will naturally melt, wipe the defrost water with a dry, soft cloth. When the frost softens, an ice scraper might be used to the accelerate de-icing process.
• Please remove the food and put in a cool place when defrosting before removing accessories.

Stop using

• Power failure:Foods can be preserved for a couple of hours even in summer in case of power failure; it is recommended to reduce the frequency of opening door and do not put fresh foods into the freezer.
• Long-time nonuse:Please unplug the freezer left unused for a long time for cleaning.Keep the door open to avoid the bad odor.
• Moving:Do not turn upside or vibrate the freezer, the carrying angle can not be greater than 45°. Do not hold the door and hinge when moving this unit.

ATTENTION

• Other mechanical devices or other means shall not be used to accelerate except those recommended by the manufacturer. Do not damage the refrigerant circuit.
• Continuous operation is recommended when the freezer is started. Please do not stop the freezer under normal circumstances so as not to affect the freezer’s service life.

TROUBLESHOOTING

The following simple issues can be handled by the user. Please call the after- sale service department if the issues are not solved.

APPENDIX

Special for new European standard
The ordered parts in the following table can be acquired from Service provider channel.

Dear customer

1. If you want to return or replace the product, please contact the store where you buy.
   (Remember to bring the purchase invoice)

2. If your product breaks down which needs to repair, please contact after-sales service provider.

ATTENTION

The model information in the product database, as well as the model identifier, can be obtained througha weblink scanned by a QR code, if any, on the energy efficiency label of the product.
For more information about the energy efficiency of the appliance, visit https://ec.europa.eu and search using the model name.
The model name can be found on the rating label of the appliance.

www.midea.com
© Midea 2022, All rights reserved

References

• Midea - Make yourself at Home - World's Number 1 Appliance Producer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>