soundcore BOOM 2 SE 80W Outdoor Speaker User Guide
- July 25, 2024
- Soundcore
Table of Contents
soundcore BOOM 2 SE 80W Outdoor Speaker
Specifications
- Maximum Output Power: 9.147 dBm
- Frequency Band: 2.4 GHz (2.402 GHz – 2.480 GHz)
The Soundcore Boom 2 SE is a portable speaker designed for high-quality sound performance.
Product Usage Instructions
- Power On/Off:
- To power on the speaker, press and hold the ON button for more than 2 seconds. To power off, press and hold the OFF button for more than 2 seconds.
- Pairing:
- To pair the speaker with a device, ensure Bluetooth is enabled on your device, then press the PAIRING button on the speaker. Once connected, you will hear a “PAIRING CONNECTED” prompt.
- BassUp Feature:
- To activate the BassUp feature for enhanced bass performance, press the BassUp button on the speaker.
FAQs
- Q: Where can I find more information and support?
- A: For FAQs and additional support, please visit soundcore.com/support. You can also contact Soundcore customer support via the provided contact information based on your region.
Scan for more information
Bluetooth Connection
Press the Bluetooth button to enter Bluetooth pairing mode, then select “soundcore Boom 2 SE” from the Bluetooth list to connect.
With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.
PRODUCT FUNCTIONS
- Button Controls
With one speaker connected to a smartphone, press the PartyCast button on up to 100 Soundcore speakers with the PartyCast function to synchronize audio and light.
Warranty
18-month limited warranty
- www.ankerjapan.com.
- service@soundcore.com
- support.mea@soundcore.com
- (For Middle East and Africa Only) support@anker.com.
- +1 (800) 988 7973 (US/Canada)
- +44 (0) 1604 936200 (UK)
- Input Charging Time: 5.5 Hours
- Play Time (varies by volume level and playback content): Up to 18 Hours
- The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc., and any use of such marks by Anker Innovations Limited. is under license.
- Other trademarks and trade names are those of their respective owners. LDAC and LDAC logo are trademarks of Sony Corporation.
Important Safety Information
- Do not place naked flame sources, such as lighted candles, on or near the product.
- Do not block any ventilation openings. Install by the manufacturer’s instructions.
- Only use attachments/accessories specified by the manufacturer.
- The operating temperature should be between 0°C to 40°C/32°F to 104°F.
- Do not make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, and system performance, and may void the warranty.
- Servicing is required when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The product contains a battery pack, so it should not be exposed to excessive heat such as sunshine, fire, or the like.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Notice
- This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
- Hereby, Anker Innovations Limited declares that this product complies with Directives 2014/53/EU & 2011/65/EU and amendment (EU) 2015/863.
- The full text of the EU Declaration of Conformity is available at the following internet address: https://www.soundcore.com.
- Maximum output power: 9.147 dBm
- Frequency band: 2.4G band (2.402GHz-2.480GHz)
- This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling.
- Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
FCC
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The highest SAR value reported under this standard during product certification for use next to the body/limb with a minimum separation distance of 0 mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
- Company Name: Fantasia Trading LLC
- Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
- Telephone: +1 (800) 988 7973
IC NOTICE TO CANADIAN USERS
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radio Frequency Exposure Statement:
- This EUT is in compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and has been tested under the measurement methods and procedures specified in IEEE 1528 and IEC 62209.
- This equipment should be installed and operated with a minimum distance of 0 mm between the radiator and your body/limb. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
CAN ICES-003 (B) / NMB-003 (B)
- This Class B digital apparatus complies with Canadian ICES-003.
References
- 863.de
- 863.eu is available for purchase - Sedo.com
- soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
- Anker (アンカー) Japan 公式オンラインストア – Anker Japan 公式オンラインストア
- soundcore Headphones & Speakers - Hear it, Feel it - soundcore US