BUILTBRIGHT BB6110B/C/D Work Bar Strobe 4 Slim Installation Guide
- July 25, 2024
- BUILTBRIGHT
Table of Contents
BUILTBRIGHT BB6110B/C/D Work Bar Strobe 4 Slim
SPECIFICATIONS
- Input Voltage: 12-24VDC
- Operating Current: 0.96A @ 12VDC
- Operating Temperature: -40° to 149°F (-40° to 65°C)
INCLUDED
- 1x LED light bar
- 1x Mounting Bezel
- 1x 3M VHB tape
- 1x Mounting Gasket
- Mounting hardware
INSTALLATION
- Mount to a flat surface or one with minimal curvature.
- Mark drill hole locations on the mounting surface using the gasket or VHB tape as a template.
- Drill a 25/32” (20mm) hole for the wires protruding from the rear of the unit at the correct location. Deburr any sharp edges from this hole.
- Mount the light along with the mounting gasket. Use the self -tapping screws provided to secure the light. Cover with mounting bezel.
WIRING
- Apply YELLOW wire to +VDC:
- Less than 1 second for next pattern
- 2-4 seconds for previous pattern
- 5-7 seconds for default pattern
- 7+ seconds for steady burn
- Synchronization: After setting each light at the right pattern, connect yellow wires of all light heads together.
- Phase Operation: Phase 1 flashes simultaneously with Phase 1, Phase 2 flashes simultaneously with Phase 2, Phase 1 alternates with Phase 2 (Up to 8 units can be synchronized.)
FLASH PATTERNS
- I (Amber) Single Flash, ECE R65 Phase 1•#
- I (Amber) Single Flash,California Title 13 Phase 1•
- I (Amber) Double Flash Phaser
- I (Amber) Triple Flash Phase 1•
- I (Alt. Amber-Color 2) Single Flash•
- I (Alt. Amber-Color 2) Double Flash•
- I (Alt. Amber-Color 2) Quadruple Flash•
- I (Alt. Amber-Color 2) Faster Full Bar•
- I (Split Amber-Color 2) Left/Right*
- I (Split Amber-Color 2) Fast Left/Right•
- I (Alt. Amber-Color 2) Combination•
- I (Amber) Single Flash, EGE R65 Phase 2
- I (Amber) Single Flash, California Title 13 Phase 2
- I (Amber) Double Flash Phase 2
- I (Amber) Triple Flash Phase 2
- I (Amber) Quadruple Flash Phase 1
- I (Amber) Quadruple Flash Phase 2
- I (Amber) Quintuple Flash Phase 1
- I (Amber) Quintuple Flash Phase 2
- I (Amber) Combo Single/Double Flash Phase 1
- I (Amber) Combo Single/Double Flash Phase 2
- I (Amber) Combo Single/Triple Flash Phase 1
- I (Amber) Combo Single/Triple Flash Phase 2
- I (Amber) Combo Single/Quintuple Flash Phase 1
- I (Amber) Combo Single/Quintuple Flash Phase 2
- I (Amber) Single Flash Left/Right Split
- I (Amber) Strobe
- (Amber) Cruise (20%)
- (Color 2) Single Flash,ECE R65 Phase 1#
- (Color 2) Single Flash,ECE R65 Phase 2
- (Color 2) Single Flash, California Title 13 Phase 1
- (Color 2) Single Flash, California Title 13 Phase 2
- (Color 2) Double Flash Phase 1
- (Color 2) Double Flash Phase 2
- (Color 2) Triple Flash Phase 1
- (Color 2) Triple Flash Phase 2
- (Color 2) Quadruple Flash Phase 1
- (Color 2) Quadruple Flash Phase 2
- (Color 2) Quintuple Flash Phase 1
- (Color 2) Quintuple Flash Phase 2
- (Color 2) Combo Single/Double Flash Phase 1
- (Color 2) Combo Single/Double Flash Phase 2
- (Color 2) Combo Single/Triple Flash Phase 1
- (Color 2) Combo Single/Triple Flash Phase 2
- (Color 2) Combo Single/Quintuple Flash Phase 1
- (Color 2) Combo Single/Quintuple Flash Phase 2
- (Color 2) Single Flash Left/Right Split
- (Color 2) Strobe
- (Color 2) Cruise (20%)
- (Amber) Steady Burn#
- (Split Amber – Color 2) Double Flash
- (Split Amber – Color 2) Quadruple Flash
- (Alt. Amber – Color 2) Single Flash
- (Color 2) Steady Burn
- Sync w/ 6002X Series Mini Bar
Default pattern
Color 2:
White (BB6010B)
Blue (BB6010C)
Green (BB6010D)
WARRANTY
ARC Lighting provides a 5 year warranty against manufacturing defects from date of purchase. If warranty service is needed, please contact the authorized dealer of where your product(s) were originally purchased.
Customer Support:
- Phone: 888-608-2220
- Email: support@arc.lighting
- Website: www.arc.lighting/warranty-claim
WARNING: CANCER AND REPRODUCTIVE HARM
WWW.P65WARNINGS.CA.GOV
BASTROP, TEXAS 78602
UNITED STATES OF AMERICA
NIN.BUILT-BRIGHT.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>