BUILTBRIGHT BB96GFA Grille Bracket Kit User Guide
- July 25, 2024
- BUILTBRIGHT
Table of Contents
BUILTBRIGHT BB96GFA Grille Bracket Kit
Product Information
- Product Name: Grille Bracket Ki
- Model Number: #BB96GFA
- Description: This grille bracket kit is designed to help you easily install lights on your vehicle’s grille.
Specifications
- Material: Sturdy metal
- Compatibility: Universal fit for most vehicle grilles
- Color: Black
- Weight: 1 lb
Product Usage Instructions
Step 1 – Plan the Install
Unbox the grille brackets and lay out all of the components. Determine
where you want to install the lights on the grille.
Step 2 – Install the Grille Bracket + Light
- Couple the lights with the front plate. Align the two holes on the sides.
- Insert the screws through the light and the bracket holes.
- You can use the provided 3M tape to attach the lights to the bracket (optional).
- Mount the lights to the chosen location on the grille.
- Hold the back plate to the rear of the grille hole/slot.
- Tighten the screw with a hex wrench.
FAQ
-
Q: Can this kit be used on all vehicle models?
A: The kit has a universal fit and can be used on most vehicle grilles. However, we recommend checking compatibility before purchase. -
Q: Can the lights be adjusted after installation?
A: Yes, the lights can be adjusted even after installation for proper alignment. -
Q: Is any special wiring required for installing the lights?
A: Basic wiring knowledge is recommended, but no special wiring is required as the lights can be connected to existing vehicle wiring.
BB96GFA
GRILLE BRACKET KIT
PARTS LIST
- 2x Front Plate
- 4x Small Back Plate
- 4x Large Back Plate
- 4x M4 x 40mm Hex Screw
REQUIRED TOOLS
M3 Hex Allen Wrench
TECH NOTES
- No cutting or drilling is required for front grille strobe light installation.
- Approximate install time: 20 minutes (not including harness installation)
SCAN FOR VIDEO INSTRUCTIONS OR VISIT BUILT-BRIGHT.COM/INSTALL
STEP 1 – Plan the install
Unbox the grille brackets and lay out all of the components. Determine where you want to install the lights on the grille.
- There are 4 Small Back Plates and 4 Large Back Plates included in this kit. Choose the optimal back plate option according to the height of the grille opening you are installing the light into. In general, openings shorter than 1” use the Small Back Plates, while openings 1”-2” in height use the Large Back Plates.
- You only need 4 of either the Small or Large Back Plates and screws for the install.
STEP 2 – Install THE grille BRACKET + LIGHT
- Couple the lights with the front plate. Align the two holes on the sides.
- Insert the screws through the light and the bracket holes.
- You can use the provided 3M tape to attach the lights to the bracket (optional).
- Mount the lights to the chosen location on the grille.
- Hold the back plate to the rear of the grille hole/slot.
- Tighten the screw with a hex wrench.
Note : If the hole/slot of the grille is too small for your hand to reach behind, you can attach the back plate to the screw loosely beforehand. Insert the back plate horizontally through the hole/slot. Adjust the back plate vertically and then tighten the screws. Do not overtighten.
BASTROP, TEXAS 78602 UNITED STATES OF AMERICA WWW.BUILT- BRIGHT.COM