carmanah MX Series Connected Traffic Beacon and Sign Systems Installation Guide
- July 25, 2024
- carmanah
Table of Contents
**carmanah MX Series Connected Traffic Beacon and Sign Systems Installation Guide
**
Product Information
Supplementary overcurrent protection only. For AC systems, ensure branch rated
overcurrent protection is provided.
If adjacent cabling routed in the same pole or conduit carries voltages
greater than 300V, consider cable insulation ratings and use of cable sleeving
or wrap.
This document is used in conjunction with the LEVEL 3 MX RRFB Module
(SPE-1000) Install Guide and is only necessary for solar equipped MX systems.
- Remove ground screw next to ground symbol label.
- Crimp the provided 12-10 AWG or 18-14 AWG ring terminal using a suitable tool onto the system ground wire (provided by installer) and fasten to standoff with screw removed in previous step.
- Secure ground wire with cable tie.
Battery Disconnect Wiring Diagrams
Single Battery System
Dual Battery System
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>