Altec Lansing LifeJacket XL Jolt with Lights, Built In Qi Wireless Charger User Manual

Altec Lansing LifeJacket XL Jolt with Lights, Built In Qi Wireless Charger

Specifications

• SPEAKER TYPE: Wireless Speaker
• BRAND: Altec Lansing
• MODEL NAME: LifeJacket XL
• RECOMMENDED USES FOR PRODUCT: Music
• SPECIAL FEATURE: Waterproof
• BATTERY LIFE: 20 hours
• CHARGE 2 WAYS: Qi Wireless and USB Port
• HOUSE PARTY PAIRING: Pair 50+ speakers
• LED LIGHT MODES: 5 LED LIGHT MODES: Multi-color slowfade, Beat to the music, Solid, Slowfade, and off
• RATING: Waterproof, Shockproof, Snowproof – Everything-Proof!
• JUST ASK: Access Siri and Google Voice Assistant via Bluetooth on your smartphone
• PRODUCT DIMENSIONS: 12 x 4.8 x 6.6 inches
• ITEM WEIGHT: 3.4 pounds

Introduction

Make your voice more visible with the LifeJacket XL Jolt. With its sharp, clear highs and bass-bumping lows, this speaker will astound you with its strong, portable sound and sturdy construction. Get caught away in the sound you and play your music nonstop for up to 20 hours. Switch between 5 different light settings to discover the ideal match for your music, and adjust your lighting to reflect the mood of the song. All of your gadgets will continue to be fully charged thanks to the built-in Qi Wireless Charging pad and USB Ports.

HOW TO RESET A LIFEJACKET JOLT

The gadget will beep when you press and hold for 5 seconds to disconnect Bluetooth. Press and hold for 10 seconds to reset all connections. The gadget will beep twice.

HOW TO RESET ALTEC SPEAKER

Press and hold the volume up and volume down keys on top of the speaker for 5-7 seconds to restart the system. The speaker will then be adjusted to its initial factory settings. twice.

HOW TO PAIR ALTEC SPEAKER

Press and hold the speaker’s power button for three to five seconds to switch it on and start the process of syncing it with your Android phone. This will enable you to associate your Altec Lansing Speaker with an Android smartphone.

HOW TO RESET ALTEC LANSING XL BOX

Press and hold for 10 seconds to reset all connections. The gadget will beep twice. Note: When the item is powered on for the first time, the light will automatically turn off after 20 seconds. When connected, the green light will continue to flash. Dear Altec Lansing Family, Welcome!

HOW TO SYNC TWO ALTEC LANSING SPEAKERS TOGETHER

Simply switch on any extra speakers, then press both the Vol + and Vol – buttons at once to add them. All additional speakers’ LED status lights become green once they are connected.

Frequently Asked Questions

• How can I tell whether my Altec Lansing speaker has enough juice?
  Connect the provided charging wire to a power source. A red LED light will be seen on the front of your speaker when it is charging. The LED on your speaker will stop shining after it has fully charged.

• Why is the blue LED on my Altec Lansing speaker blinking?
  The speaker is prepared to establish a connection when a blue light on the front of the device begins to blink. The speaker is paired when the blue light remains steady. Verify that there isn’t another device connected to the speaker already.

• How long does it take to charge an Altec Lansing speaker?
  The charging process takes roughly 4 hours. The power button on the device will become orange when the charging cord is connected. When the item is fully charged, the orange light will go out.

• How is a life jacket jolt reset?
  The gadget will beep when you press and hold for 5 seconds to disconnect Bluetooth. Press and hold for 10 seconds to reset all connections. The gadget will beep twice.

• What causes my Altec speaker to malfunction?
  Make sure the adapter is connected to the speaker if the power adapter is plugged in and the adapter’s light is on. If, regardless of charging time, the speaker only works when the adapter is plugged in, the battery is defective. Switch out the battery.

• Why does the blue LED on my Bluetooth speaker flash?
  A strong connection may be indicated by a blue light that blinks continuously. The headphones may be in pairing mode if they have a slow blue light that pulses. Blinking red and blue lights are the most typical pairing mode light pattern.

• Why is the speaker in my Altec Lansing beeping?
  This occurs as a result of a low battery warning, a device connection, or when charging is finished. Depending on the state of your Bluetooth speaker, the frequency, tone, and intensity of the beeping sounds will change.

• The reason why my Bluetooth speaker won’t charge
  There are two potential causes for your Bluetooth speaker to stop charging: software or hardware problems. While hardware problems include a defective micro USB cable, an undervoltaged lithium-ion battery, and a broken solder joint on the USB charging socket, software problems are caused by faults in software.

• What does the Bluetooth speaker’s red light signify?
  Blinking red indicates charging. It is fully charged when the battery symbol turns green.

• Is my Bluetooth fully charged? How can I tell?
  When the battery is charging, the indication light will come on. The light won’t turn on for up to a minute. The indicator light will go out when the headset’s battery is fully charged, which takes roughly 2-3 hours.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>