walkntalk PO06430_WNT Universal Phone Holder User Guide
- July 24, 2024
- walkntalk
Table of Contents
walk talk PO06430_WNT Universal Phone Holder
Quick Start Guide
What’s included:
Installation
1a. Install for Dash Mount usage
Find a suitable location in your vehicle where you can attach the dash mount
that won’t obstruct your visibility on the road. The surface should be non-
porous and thoroughly cleaned for the mount to adhere properly.
Remove the 3M adhesive backing from the Dash Mount and press firmly to secure
it to your vehicle. Wait at least 15 minutes for the adhesive to hold before
continuing with the installation.
1b. Install for Air Vent usage
Find a suitable air vent in your vehicle where you can attach the Vent Mount
that won’t obstruct your visibility of the road.
Rotate the knurled body of the Vent Mount to extend the securing hook. Latch
the securing hook over a vane in your chosen air vent. Rotate the knurled knob
in the opposite direction to withdraw the securing hook until the Vent Mount
is secured in position.
Finish the installation
Unscrew the ring from the back of the universal phone holder. Push the ball on your chosen (dash or vent) mount through the ring and into the concave connector on the back of the universal phone holder. Tighten the ring to the desired position.
Usage
Once the phone holder is fully assembled and securely mounted in your vehicle, you’re ready to enjoy one-handed operation simply by placing your phone in the holder. The arms will lower and automatically lock your phone in position with gravity. To remove your phone, simply lift your phone upwards and the arms will raise to release your phone.
Handy hints:
- Vent Mount is only compatible with horizontal air vents.
- The phone holder supports vertical/portrait orientation only.
- The phone mount is compatible with phones and cases up to 12mm in thickness and with 4 to 7-inch screens.
For more information
For the most up-to-date assistance, please scan this QR Code for more information about this product.
Stay Connected
@walkntalk_
@walkntalkau
walkntalk.com.au
walk talk – 2-YEAR WARRANTY
WalknTalk will replace the faulty product at no cost to the consumer. The warranty does not extend to any consequential damages or cost that may be incurred and is valid for 24 months from date of purchase. The consumer must return the faulty product to the retail store it was purchased from together with proof of purchase.
The warranty is provided by:
Pacific Optics (in Australia) 18 Taree St, Burleigh Heads, QLD 4220
Telephone: 1300 237 425
Email : accessories@walkntalk.com.au
Signature Marketing NZ Ltd (in New Zealand) 25a Triton Drive, Rosedale, Auckland 0632
Telephone (NZ): (09) 479 5524
Email (NZ): sales@signaturenz.com
The benefits to the consumer under this warranty are in addition to other rights and remedies of the consumer under Australian laws in relation to the goods to which the warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>