Shenzhenshishuangsikejiyouxiangongsi T08 TWS Bluetooth Earbuds User Manual

T08 TWS Bluetooth Earbuds

User Manual

Main product and Accessories

The product structure description

The pairing operation

Binaural pairing operation

1. Open the charging case, the white light of the headphone flashes 3 times, it will turn on automatically.
2. And the left and right earphones are automatically paired. When one earphones orange and white lights alternately flash. and the other headphone white light flashes every three seconds it means that both earphones are successfully paired.
3. Open the Bluetooth device at this time, search for “T08” and click the connection.
4. Click the connection. After the connection is successful, the tone will be “connected”.
5. At this point, you can start listening to the music and calling.

Note: For the first time. you need to manually connect the earphone. The earphone that is not connected for the first time will automatically connect back to the last connected device(Apple or Android phone connection is the same)

Common operating instructions

Prompt tone description

Earphone indicator light

Charging case indicator

Basic information

Common instructions for use

1. Switch to unilateral use in bilateral mode

Put the left ear/right ear directly into the charging case, and the earphone automatically realizes the left and right switching .It can be directly put back into the charging case without other operations.

2. Shut down self-charging operations
The earphone is put into the charging compartment, the earphone automatically shuts down and charges itself, the earphone is fully charged, and the earphone is automatically turned off.

3. Left and right ear can switch freely
A. Putting the left ear into the charging box during the use of the ear will automatically switch the right ear to the main ear and continue to maintain the music state before switching.

B. Putting the right ear into the charging box during the use of the ear does not affect the normal operation of the left ear.

C. Turn on left or right ear separately, it will automatically connect back to the phone.

Trouble shooting

If your Bluetooth earphone cannot be paired with your phone, try the following steps:

• Please make sure the earphone is fully charged.
• Please make sure the earphone is turned on.
• Make sure the earphone is not connected to other devices.
• Please make sure the Bluetooth function of the phone is normal and the Bluetooth function is turned on;
• Make sure the distance between the earphone and the phone is within the connectable range.

If the above steps can’t help you solve the pairing problem, please try to pair the earphone manually (In the off state, long press in the left/right ear for 5 seconds until earphone are red and blue alternately ,the earphone enter the mutual pairing state. and the headphones are waiting for the headset. Reconnect and reopen the device.)

When the headset is dead or malfunctioning etc, press and hold the headset to touch the position, slowly put the headset into the charging box to charge, and the headset can be released after being placed in the charging compartment.

Precautions

• Please store and use this product in a normal temperature environment;
• Do not expose this product to rain or moisture environment;
• Do not throw it away to avoid product damage caused by falling;
• Do not disassemble ,repair or modify this product;
• Do not wipe the product with a chemical solvent;
• Do not discard it at will, or put it at high temperature(temperature above 60 degrees) and fire to avoid danger.

Waring

Please follow the safety cautions and use the product in a correct way to avoid casualties and damages. Please follow the following notes to prevent accidents like fire, overheat, chemical leakage and explosion.

1. To reduce the risks of fire and damage of the battery, please do not expose the product to the rain or moisture environment.
2. To reduce the risks of fire, please do not cover the product with inflammable like carpet and quit
3. To Prevent the product from further damages ,it is prohibited to dismantle the broken device without permit. In this case, please consult the after-sales department for the repair.
4. Please do not use it when the device is overheating
5. Please do not apply any batteries, powers or accessories
6. Please do not use self-made or modified batteries
7. Do not use the wireless charging transmitter that has not passed the QI certification standard to charge the charging box.

Warranty Card

Warranty

A. This product is covered under warranty for a period of one year from the date of purchase limited to normal use and maintenance of the machine parts, materials and functions. Problems and failures verified upon further identification, will be provided free repair and replacement parts.

B. Limited to the following:

1. Man made damage.
2. Headset is beyond the warranty period.
3. Can’t provide proof of purchase.
4. User does not follow the instructions, so that the headphone wire and earplug broken;
5. Without the authorization to dismount, repair, alteration structures.
6. Due to natural disasters and other force majeure (such as earthquakes, fires) product failure of damage causes.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>