U-BOAT Chimera 43 Bronze Watch User Guide
- June 12, 2024
- U-BOAT
Table of Contents
CHIMERA 43 Bronze Watch
User Guide
Dear Customer
WE CONGRATULATE YOU ON THE PURCHASE OF THIS U-BOAT WATCH.
IN THIS BOOKLET YOU WILL FIND THE INSTRUCTIONS FOR USE.
WE KINDLY INVITE YOU TO REGISTER YOUR WATCH ON OUR OFFICIAL WEB SITE IN THE
U-CLUB AREA, DEDICATED EXCLUSIVELY TO THE U-BOAT WATCHES OWNERS AND GAIN
ACCESS TO FURTHER BENEFITS AND PREVIEWS ON OUR LATEST NEWS, EVENTS AND OFFERS.
Automatic Mechanical
A. CAP CROWN
B. CROWN EXTRACTION BUTTON
C. CROWN
D. HOUR HAND
E. MINUTE HAND
F. SECOND HAND
G. 24 HOUR INDICATOR
H. DATE
WATCH INSTRUCTIONS
Representative image.
Some components may be in different positions or not fitted.
-
POSITION 1
NEUTRAL POSITION -
POSITION 2
FIRST CLICK -
POSITION 3
SECOND CLICK
INSTRUCTIONS FOR USE
- Unscrew the cap crown A to gain access to the crown C .
POSITION 1
NEUTRAL POSITION| to wind and start the watch by turning the crown C clockwise.
---|---
POSITION 2
FIRST CLICK| press button B to move the crown C into position 2 (first click). Turn the crown C clockwise to set the date H .
POSITION 3
SECOND CLICK| press button B again to move the crown C into position 3 (second click) and turn the crown C to set the exact time. Use indicator G for correct date change H . - Fully depress the crown C to move it back into the neutral position. Carefully screw in the cap crown A until firmly in place.
CARE AND MAINTENANCE
- The precision mechanism in your watch will provide long-lasting performance when properly cared for.
- We recommend taking your watch to an Authorised Retailer/Authorised Service Centre every 3-4 years for a check-up and to perform ordinary maintenance on all mechanical parts and restore of water-resistance.
- We also advise taking your watch to an Authorised Retailer/Authorised Service Centre to change the strap.
- Avoid leaving your watch where it is exposed to large temperature variations, humidity, the sun and strong magnetic fields.
- Make sure the watch is in adequate conditions for water use/activities.
- Remember to rinse the watch after it comes into contact with seawater.
AUTOMATIC WATCHES REQUIRE MANUAL WINDING FOLLOWING A LONG PERIOD OF INACTIVITY.
U-BOAT HEAD OFFICE
Via Pesciatina 751H
Garegnano, Capannori – 55010 Lucca – Italy
Tel: +39 0583 469288 – Fax: +39 0583 462249
www.uboatwatch.com
service@u-boatwatch.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>