KOHLER K-1958-GH Freestanding Heated Bubble Massage Air Bath With Straight Shroud Owner’s Manual

KOHLER K-1958-GH Freestanding Heated Bubble Massage Air Bath With

Straight Shroud

Specifications

• Model: 72 x 36 freestanding Heated BubbleMassageTM air bath with straight shroud K-1958-GH
• Material: [Material]
• Technology: BubbleMassageTM
• Dimensions: 72″ x 36″
• Bathing Area: 50-3/4″ x 24-7/8″ (Basin area, bottom), 67-5/8″ x 29-3/16″ (Basin area, top)
• Water Depth: 15-11/16″
• Water Capacity: 90 gal (340.7 L)
• Weight: 100 lbs (45.4 kg)
• Electrical Requirements:
  • Blower: 120 V, 15 A, 60 Hz
  • Heater: 120 V, 15 A, 60 Hz
• Drain Location: Center

Product Usage Instructions

For proper installation, follow these steps:

• Ensure two dedicated circuits are available, protected with Class A Ground-Fault Circuit-Interrupter (GFCI).
• Verify the hot water supply is at least 70% of the bath capacity.
• Install the product according to the provided installation instructions.
• This bath is designed for freestanding installation only.
• If installing a rim-mount faucet, ensure no interference above or below the deck before drilling holes.

Maintenance

To maintain your product:

• Regularly clean the bath using recommended products like Drain Treatment and Tub & Shower Cleaner.
• Refer to the user manual for detailed maintenance instructions.

FAQ

• Q: What are the electrical requirements for this product?
• A: The blower requires 120 V, 15 A, and 60 Hz, while the heater requires 120 V, 15 A, and 60 Hz.
• Q: Can this bath be used with a rim-mount faucet?
• A: Yes, but ensure there is no interference above or below the deck before drilling any holes for installation.
• Q: What is the water capacity of this bath?
• A: The water capacity is 90 gallons (340.7 liters).

Features

• 118 to 122 air jets release thousands of heated bubbles that surround and support the body in a warm massage
• Automatic and manual purge cycles remove residual water from air channels after use
• Variable-speed blower lets you adjust massage intensity to 18 levels
• The freestanding design creates a striking focal point in your bathing area
• 16″ (406 mm) depth offers a deep soaking experience
• Integral lumbar support on both ends
• Textured bottom surface
• The wide ledge on one side is ideal for the deck-mount faucet and/or handshower
• Straight shroud
• Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
• Automatic and manual purge cycles remove residual water from air channels after use

Material

• Acrylic

Technology

• Auto-shutoff timer on the blower allows users to enjoy the Heated BubbleMassage™ experience for 60 minutes before turning off
• User interface: electronic keypad control

Installation

• Center drain
• Freestanding
• PureFlo drains are not recommended for a deck-mount faucet installation
• Remote blower motor installation required (relocation kit is included)

Recommended Products/Accessories

• K-7265 Brass toe tap bath drain
• K-23726 Drain treatment
• K-23732 Tub & shower cleaner

Codes/Standards

• ASME A112.19.7/CSA B45.10
• CSA B45.5/IAPMO Z124
• ASTM E162
• ASTM E662
• UL 1795
• CSA C22.2 No. 218.2
• IAPMO Certification
• cUL Listed
• UL Listed

KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER® Hydrotherapy Components Five-Year Limited Warranty

• See the website for detailed warranty information.

Available Colors/Finishes

• Color tiles are intended for reference only.

Color Code Description

• 0 White

Dimension

Required Electrical Service

• Two dedicated circuits are required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).
• Blower: 120 V, 15 A, 60 Hz
• Heater: 120 V, 15 A, 60 Hz

Technical Information

• All product dimensions are nominal.
• Drain location: Center
• Basin area, bottom: 50-3/4″ x 24-7/8″ (1289 mm x 632 mm)
• Basin area, top: 67-5/8″ x 29-3/16″ (1718 mm x 741 mm)
• Weight: 100 lbs (45.4 kg)
• Minimum floor load: 45 lbs/ft² (219.7 kg/m²)
• Water depth: 15-11/16″ (399 mm)
• Water capacity: 90 gal (340.7 L)
• Template: Footprint, 1245664, not required, included
• Electrical component rating: Blower: 120 V, 10 A, 60 Hz Heater: 120 V, 5 A, 60 Hz

Notes

• Measure your actual product for rough-in details.
• Install this product according to the installation instructions.
• The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
• This bath is designed for freestanding installation only.
• If installing a rim-mount faucet, make sure there is no interference above or below the deck before drilling any holes.

CONTACT

• 1-800-4KOHLER (1-800-456-4537)
• Kohler Co. reserves the right to make revisions without notice to product specifications.
• For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada
• 2-26-2024 21:23 – US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>