NARITA NMC-600 Food Chopper User Manual

NARITA NMC-600 Food Chopper

Product Specifications

• Dimensions: 140.00 mm x 93.33 mm
• Model: NMC-600
• Type: Food Chopper

Product Usage Instructions

Cleaning and Maintenance

1. Please clean and dry the mixing bowl, blade, and bowl lid after each use.
2. Never immerse the motor body in water or other liquids to avoid electric shock. It can only be cleaned by wiping.
3. Be very careful when cleaning the blade; it is very sharp.
4. After cleaning, dry each part of the product, then reassemble and store it well.
5. Do not subject any part of this product to high temperatures for sterilization.

Warning and Safety Instructions

1. Make sure the food chopper is connected with 120V~60Hz voltage before using.
2. Always disconnect the food chopper before installing and removing components.
3. Never use the appliance with a damaged cord or plug or when malfunctions or is damaged in any way.
4. If damaged or missing parts, contact customer service.
5. Please install all parts before adding ingredients, especially ensuring the blender blade is correctly installed.
6. The volume of ingredients cannot exceed the MAX line.
7. Never use the machine without food inside.
8. Do not put the blender cup in the microwave or refrigerator.
9. Avoid touching detachable parts when the product is working to prevent injury or damage.
10. After using it for 15 seconds, wait two minutes before processing again.

Parts Description

1. ON/OFF: Press and hold to turn on; release to turn off.
2. Motor Body: Contains a motor and PCB board that provides power for the blade.
3. Mixing Bowl Lid: Cover it on the bowl to prevent splashing.
4. Chopping/Mixing Blade: For chopping, mixing, and smashing vegetables or raw meat.
5. Mixing Bowl: Place chopped food into the bowl for preparation.

Warning

1. Make sure the food chopper is connected with 120V~60Hz voltage before using.
2. Always disconnect the food chopper before installing and removing the components.
3. Never use the appliance with a damaged cord or plug or when the appliance has malfunctioned or been damaged in any way.
4. If the appliance is damaged or there are missing parts, please contact our customer service.
5. Please install all parts of the machine before adding ingredients, especially to ensure the blender blade is installed in place and running smoothly.
6. The volume of ingredients cannot exceed the “MAX” line.
7. Never use the machine without food inside.
8. Never put the blender cup in the microwave or refrigerator.
9. Never touch the detachable parts when the product is working to avoid injury or damage to the product.
10. After using it for 15 seconds, please wait two minutes before processing again. It will help prolong the life of the product. After completing each function, stop for two minutes as a cycle. If you continue to work for 3 cycles, the machine must stop for more than 30 minutes to wait for the motor to cool down.
11. After processing, please wait for the blender blade and motor to stop rotating, and make sure to disconnect the power before removing the machine body.
12. If the product stops working during operation, it may be caused by the motor temperature control protection. Please turn off the switch, disconnect the power supply, and let it cool down for 30 minutes before using it.
13. Never put the blender blade and blender jar lid in the microwave or refrigerator. Please clean them with warm soapy water.
14. Never immerse the machine body in water.
15. Never use hard materials such as steel wool to wipe the machine to avoid scratches.
16. Keep the product away from children.
17. This appliance is intended for household use only. Do not use outdoors.
18. Unplug the power when the machine will not be in use for a long time.
19. Handle the blades with great care when cleaning.
20. All accessories are special accessories for this machine and should not be used for other purposes.
21. Never sterilize each part of the product for cleaning.
22. Turn off the power switch and disconnect the power before replacing parts.

Food Chopper Components

Parts Description

1. ON/OFF : Press and hold to turn on; release to turn on.
2. Motor Body: The main parts of the product contain a motor and PCB board that provide power for the blade.
3. Mixing Bowl Lid: Cover it on the bowl to prevent splashing.
4. Chopping/Mixing Blade: Chopping, mixing, and smashing vegetables or raw meat.
5. Mixing Bowl: Place the chopped food into the bowl to prepare for blending.

How to Use the Chopper

1. For initial usage, please thoroughly clean the parts that will come in contact with food.
2. Place the mixing bowl on the table. Remember to put the silicone pad at the bottom of the bowl to prevent slippage.
3. Insert the blender blade into the fixed shaft of the mixing cup.
4. Put the steamed vegetable, fruit, cereals, or raw meat into the mixing bowl and add the appropriate amount of water, juice, or milk accordingly. Then close the lid.
5. Put the machine body on the cover of the mixing cup and fix it to the corresponding groove. (Remember only when the machine body is correctly positioned can the machine be turned on).
6. Plug in the power and gently press and hold the “ON/OFF” button. The blades will start to spin and the blades will stop once you release the button.
7. Unplug the power supply when finished. Then take out the blended ingredients.
8. it is recommended that the continuous working time should not exceed 15 seconds.
9. After the processing is complete, disconnect the power supply and wait for the blade to stop rotating. Remove the machine body open the lid ofthe mixing bowl, take out the mixing blade, and use a silicone spatula to take out the ingredients.
10. lf the ingredients stick to the mixing cup, turn off the power switch, disconnect the power supply, scrape it off with a silicone spatula, and then process again.
11. This machine cannot be used to grind excessively hard materials (such as soybeans, bones, rice, frozen meat, etc) and watery liquid ingredients.
12. If the product shakes due to uneven distribution of ingredients, please turn off the device, disconnect the power supply, distribute the ingredients evenly in the cup, and then turn on the power again.
13. lf food is not delicate enough after processing for 15 seconds, please wait two minutes to blend again, it helps prolong the life of the product.

Product Features

1. “S” shape blade design allows for super delicate puree
2. The and-Hold Switch design is easy and safe to control
3. Overheating Protection Function
4. Heat Resistant Glass Bowl: hygienic, visible, and easy to clean
5. All parts are detachable and easy to clean
6. Planetary Gearbox: smooth, low noise operation and mixes well

Product Specifications

Cleaning and Maintenance

1. Please clean and dry the mixing bowl, blade and bowl lid after each use.
2. Never immerse the motor body into water or other liquids to avoid electric shock. It can only be cleaned by wiping.
3. Please be very careful when cleaning the blade; it is very sharp.\
4. After cleaning, please dry each part of the product, then reassemble and store it well.
5. Do not subject any part of this product to high temperatures for sterilization.

Trouble Shooting

Note:

• The above are common failure points and troubleshooting methods. For other faults, please contact our customer service.
• The blade is only allowed to be used when well assembled into the mixing cup and with the mixing cup covered. Never directly assemble the blade on the motor body and start the machine to avoid injuries.

LIMITED WARRANTY

This unit is warranted against defective materials or workmanship for one year from the date of purchase (warranty is only valid with a dated proof of purchase). The warranty is valid for any manufacturing defects only. This warranty covers operational defects incurred in normal use and does not apply in the case of damage, abuse, mishandling, accident, or failure to follow operation instructions. During the one year warranty period, a product with a defect will be either repaired or replaced with a reconditioned comparable model (at our option). Any return of defective merchandise to the manufacturer must be processed accordingly by contacting customer service first to obtain the Return Merchandise Authorization Number and freight prepaid with proof of purchase. (Please pack your product well; we will not be responsible for damages incurred as a result of improper packing.) We will not accept any returns of merchandise without an applicable RMA#.

SCANNER

www.naritausa.com

Frequently Asked Questions

• Q: What should I do if my food chopper emits an unpleasant smell during initial use?
  • A: It is a normal phenomenon for the first few uses. Ensure that the blender blade is installed correctly and follow proper cleaning instructions.
• Q: Can I sterilize any part of the product at high temperatures?
  • A: No, do not subject any part of the product to high temperatures for sterilization. Follow the cleaning instructions provided in the manual.
• Q: What should I do if my food chopper does not work even after pressing the power button?
  • A: Check if the blender blade is correctly installed, ensure the product is in an upright position, verify voltage levels, and remove any excess ingredients that may be causing issues.

References

• naritausa

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>