NARITA NSM-811 Soymilk Maker Instruction Manual

: June 27, 2024
: NARITA

Table of Contents

NARITA NSM-811 Soymilk Maker
IMPORTANT SAFEGUARDS
BEFORE FIRST USE
SPECIFICATION
PARTS IDENTIFICATION
HOW TO USE
HOW TO USE
CLEANING & MAINTENANCE
Maintenance
TROUBLESHOOTING
RECIPE
RECIPE
LIMITED WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NARITA NSM-811 Soymilk Maker

Please read this manual thoroughly before operating this unit. This unit must only be serviced by an authorized center.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS.
Do not touch hot surfaces. Handle with care and always use the handle on the side for carrying.
To protect against electrical shock, fire, or personal injury, do not immerse the power cord, plug, or product in water or other liquid.
This appliance should not be used by children; by individuals whose physical, sensory, or mental abilities may prevent safe use of the appliance; or by individuals with limited knowledge of how to use the appliance. Close supervision is needed when using this appliance near these individuals.
Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure they do not play with the appliance.
Touch Cancel, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner.
Do not use any accessories or attachments not authorized by NARITA USA. The use of attachments not recommended by the manufacturer, such as canning jars, may cause a risk of injury to persons.
For household countertop use only. Do not use outdoors. Not for commercial use.
Do not let the cord contact the hot surface, including the stove.
Do not place the appliance on or near a hot gas or electric burner, or a heated oven; heat from an external source will damage the appliance.
Extreme caution must be used when moving the appliance containing hot liquids.
Do not use the appliance for other than intended use.
This product is not designed to deep fry.
To avoid spills or splatter, do not fill the pitcher beyond measurement indicators.
The pitcher will be hot after cooking. Allow sufficient cooling down time before handling or serving. Keep hands away from the product and use side handles for carrying. Failure to comply may result in scalding or serious injury.
Proper maintenance is recommended after each use. Refer to “Care & Cleaning”. Allow the unit to cool before cleaning the appliance.
Spilled food can cause serious burns. Keep appliances and cords away from children. Never drape the cord over the edge of the counter and never use the power outlet below the counter.
Read and save these safety guidelines. Failure to adhere to these safety guidelines may result in serious injury.
A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a long cord.
A detachable power supply extension cord may be used with caution. If an extension cord is used, note the following:
- The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
- The extension cord should be a 3-prong grounding plug.
- The extension cord should not drape over the countertop or tabletop where it can be pulled by children or tripped over.
Do not attempt to repair, replace, alter, or modify components of the appliance, as this may cause electric shock, fire, or injury, and will void the warranty.
Do not tamper with any of the safety mechanisms.
Do not use units in electric systems other than 120V~60Hz for North America. Do not use power converters or adapters.
Always operate working with the lid in place. The lid and/or lid cap should only be removed when the product is OFF or Paused, to add ingredients to the pitcher or use the food tamper.
Avoid contact with moving parts. Never remove or rock the pitcher/lid during operation.
Keep hands and utensils out of the pitcher while working to reduce the risk of severe injury to persons or damage to the product.
Blades are sharp. Avoid contact with moving blades. Use caution when cleaning.
Do not operate the product while the pitcher is empty.
The lid caps must be in place when using, or when working with hot contents. Spray, steam, or spatter may cause scalding burns. Do not overfill the pitcher. Keep hands away from lid openings to prevent burns.
Do not leave the appliance unattended while in use.
Do not leave foreign objects in the product, as this may damage the blades and other components of the product. Failure to remove foreign objects from the blender may cause injury.
Lids and tampers are not interchangeable between different blenders.

PLEASE SAVE THESE INSTRUCTIONS.

Read and save these safety guidelines. Failure to adhere to these safety guidelines may result in serious injury.

BEFORE FIRST USE

Before using it for the first time, it is recommended to clean the interior of the product thoroughly. Please follow the procedures below before using the product:

Read all instructions and important safeguards.
Remove all packing materials and make sure that the product has been received in good condition.
Take care to keep the electrical components on the exterior of the base dry, and wipe the interior of the kettle with a damp cloth.
Rinse out the inside thoroughly with water.
With a damp cloth, gently wipe off the exterior. Do not wipe off electrical components as this may cause damage to the unit.
Dry all parts completely.
Keep hands and utensils out of the container while working to reduce the risk of severe injury to persons or damage to the product. A scraper may be used but must be used only when the product is not running (does not apply to an acceptable scraper integral with the appliance).

Blades are sharp. Handle carefully.

BRIEF INTRODUCTIONS
Thank you for purchasing the Narita Multi-Function Soymilk Maker. Please follow these simple tips to get the maximum performance and satisfaction from this appliance. Use according to our instructions and it will give you years of trouble-free enjoyment.

SPECIFICATION

MODEL	RATED VOLTAGE	RATED FREQUENCY	POWER CONSUMPTION	CAPACITY
NSM-811	120V	60Hz	Heating 800W Stirring 180W	1000ML

PARTS IDENTIFICATION

NARITA-NSM-811-Soymilk-Maker-fig-1

HOW TO USE

Take out the Soymilk Maker. Clean the lid and container with water, and wipe the outside surface of the base with a soft wet cloth. Do not immerse any working electrical components such as the base, pitcher, and/or power cord in water. Do not spray water on any part containing electrical components.
Clean the ingredients. Cut them smaller than ½ inch or 1cm and put them in the container. Add water. Maximum contents capacity is 1000ML.
Install the lid plug on the lid. Ensure that the triangle on the lid aligns with the triangle on the handle. Failure to do so will result in an error “E2” on the screen.
Plug the power cord into an available 120V AC wall outlet. The control panel will display “- – “.
Press Function to select a function after 3 seconds of turning on.
After the cooking function finishes, the appliance will audibly beep 10 times and keep warm at 70℃ for 2 hours. The control panel shows “bb”.
- Cooking Function: Soymilk, Nut Milk, Paste, Boil, Blender Soup
When the program has been completed, the product will beep 10 times. Please remove the plug from the wall outlet.
Carefully remove the lid, pour, and serve.
Cancel Ends the selected function at any time. Press and hold the cancel button for 3 seconds — the product will beep once and the control panel display “- – “.

Function	Default Timer	Function	Default Timer

Soymilk

|

35 mins

|

Nut Milk

|

27 mins

Paste

|

23 mins

|

Blender Soup

|

21 mins

Boil

|

10 mins

|

Blender

|

2 mins

Keep Warm

|

120 mins

|

Clean

|

11 mins

HOW TO USE

Press Function “Soymilk”
Start cooking
35 mins
Press Function “Paste”
Start cooking
23 mins
Press Function “Boil”
Start cooking
10 mins
Press Function “Keep Warm”
Start function
60℃, 2 Hours
Press Function “Nut Milk”
Start cooking
27 mins
Press Function “Blender Soup”
Start cooking
21 mins
Press Function “Blender”
Start cooking
2 mins
Press Function “Clean”
Start function
11 mins

CLEANING & MAINTENANCE

Cleaning

Be careful of scalding caused by residual heat. Please wait until the jar fully cools before cleaning.
After the drink is made, cooled, and poured out, please immediately clean the product.
After using the Soymilk Maker, clean the outside surface of the main base with a soft wet cloth. Do not immerse the product into the water or any liquid. Do not spray water on any part containing electrical components such as the main base.
When cleaning, rinse the pitcher interior and accessories with clean water, and wipe off residual water. The blades are very sharp. Be careful with the blades to avoid cuts during cleaning.
Do not use abrasive detergent or corrosive liquid (such as gasoline and acetone) to clean the device.
If any part of the product is stained by fruit/vegetable juice or other drinks, add several drops of edible oil to wipe the stains before rinsing it with clean water to better remove the stains. Please wipe off residual water after rinsing any parts with clean water.
If any residues in the jar form a hard block that is difficult to remove, please add an appropriate amount of water to soak it first, and then rinse and wipe it off after it is softened.
While you are using this unit, minerals dissolved in the water can get stuck on the stainless blade. This is called scaling and it is not harmful. To maintain the performance, clean the product by using citric acid. Be careful of the blades to avoid cuts when wiping them. Do not wipe the device after it is powered on.

Maintenance

If the device is not used for a long time, please keep it in a dry and ventilated place to prevent the motor from being affected by moisture.

TROUBLESHOOTING

Problem| Possible

Reason

| Solution
---|---|---
The blender will not power ON| · Power cord not fully inserted into the outlet

· Fuse has blown

| · Ensure the cord is plugged fully into a 120V outlet

· Check the blender on a different outlet

· Contact Narita USA customer service

E1| Thermostat problem| Contact Narita USA customer service
E2| Sensor

· Lid is not secure

· Sensor has failed

| · Remove and reposition the lid on the blender

· Contact Narita USA customer service

E3| Dry heat

· Ingredients may be too thick

· Not enough liquid

| · Wait a few minutes for the motor to cool and clean it

· Add liquid when using a cooking function

· Please DO NOT exceed the maximum capacity for contents of 1000ML

Too much water or food ingredients added

| Add food ingredients or water based on instructions

RECIPE

Soymilk

INGREDIENTS

350ml warm water for soaking
2 cups soybeans
800 ml water for blending

INSTRUCTIONS

Suggestion: you can soak soybeans in water for up to 1 hour
Strain, discard soaking water, and rinse with clear water — remove any skins if desired
Remove the lid from the product
Add soybeans and water to the product
Secure the lid to the pitcher
Select the Soy Milk function
When the function has been completed, the appliance will beep 3 times and keep warm at 70℃ for 2 hours. The display will show “bb”
Ending the function will beep 10 times and the display will show “00”
Please remove the plug from the wall outlet

Rice Milk

Ingredients

600 ml water
2 cups brown rice, cooked
8 dates (or other sweetener to taste), pitted

INSTRUCTIONS

Suggestion: you may cook brown rice
Remove the lid from the pitcher
Add cooked brown rice and water to the product
Secure the lid to the pitcher
Select “Nut Milk” function
When the function has been completed, the appliance will beep 3 times and keep warm at 70℃ for 2 hours. The display will show “bb”
Ending the function will beep 10 times and the display will show “00”
Please remove the plug from the wall outlet

RECIPE

Mango Juice

Ingredients

300 g of mango chunks
500 mL of water or milk
1 tablespoon of sugar, optional
70 g of ice cubes, optional

INSTRUCTIONS

Remove the lid from the pitcher
Add mango and water to the pitcher
Secure the lid to the pitcher
Select the “Blender” function
When the function has been completed, the product will beep 10 times and the display will show “00”
Please remove the plug from the wall outlet

Almond Soup with Peanut

Ingredients

Peanut 50g
Almond 50g
200 mL milk
1 cup sugar ¼ teaspoon orange zest

INSTRUCTIONS

Remove the lid from the pitcher
Secure the lid to the pitcher
Select “Nut Milk” function
When the function has been completed, the appliance will beep 3 times and keep warm at 70℃ for 2 hours. The display will show “bb”
Ending the function will beep 10 times and the display will show “00”
Please remove the plug from the wall outlet

Ingredients

1 Tbsp Butter
500 grams Pumpkin
1 Onion
3 Garlic Cloves
1 Bay Leaf

INSTRUCTIONS

Remove the lid from the pitcher
Add all ingredients to the pitcher
Secure the lid to the pitcher
Select “Blender Soup” function
When the function has been completed, the appliance will beep 3 times and keep warm at 70℃ for 2 hours. The display will show “bb”
Ending the function will beep 10 times and the display will show “00”
Please remove the plug from the wall outlet

Broccoli Puree

Ingredients

175 mL water
½ tsp of salt
800 mL broccoli florets

INSTRUCTIONS

Remove the lid from the pitcher
Add broccoli, salt, and water to the pitcher
Secure the lid to the pitcher
Select the “Paste” function
When the function has been completed, the appliance will beep 3 times and keep warm at 70℃ for 2 hours. The display will show “bb”
Ending the function will beep 10 times and the display will show “00”
Please remove the plug from the wall outlet

LIMITED WARRANTY

This unit is warranted against defective materials or workmanship for one year from the date of purchase (warranty is only valid with a dated proof of purchase). The warranty is valid for any manufacturing defects only. This warranty covers operational defects incurred in normal use and does not apply in the case of damage, abuse, mishandling, accident, or failure to follow operation instructions. During the one-year warranty period, a product with a defect will be either repaired or replaced with a reconditioned comparable model (at our option). Any return of defective merchandise to the manufacturer must be processed accordingly by contacting customer service first to obtain the Return Merchandise Authorization Number and freight prepaid with proof of purchase. (Please pack your product well; we will not be responsible for damages incurred as a result of improper packing.) We will not accept any returns of merchandise without an applicable RMA#.