NARITA NMC-235 Cordless Mini Chopper User Manual

NARITA NMC-235 Cordless Mini Chopper

Specifications

• Product: Cordless Mini Chopper
• Bowl Capacity : Not specified
• Rated Current : Not specified
• Charging Voltage : Not specified
• Charging Current : Not specified

Product Information and Usage Instructions

Using Your Mini Food Processor

1. Before first use, plug and fully charge the unit. The red light turns on when charging and turns off when full. Clean the blade, chopping cup, and splash guard lid before the first use.
2. Insert the chopping blade onto the centering shaft in the processing bowl. Be careful when handling the sharp blades. Add food to be processed into the glass processing bowl (below the max line).
3. Insert the lid onto the bowl, then put the motor head and secure the lid in place. Push the switch and start to process the contents. The blades will be blocked if it is overloaded when starting. Reduce the amount of food then go on.
4. Release the switch about 15 seconds after one cycle of processing. Please continue to press and push the switch for another cycle if the food is not fine enough. After processing, remove the motor head, and then take off the splash guard from cup, pour out the food. Clean the blades, splash guard, and bowl.

Maintenance and Care

1. Clean the splash guard, blades, and bowl immediately after using the product.
2. Do not rinse the motor head directly with water while cleaning; only use a soft warm cloth to wipe the outside of the head when cleaning.
3. When cleaning, put an appropriate amount of detergent in clean water and clean it with a cleaning pad; better cleaning with warm water.
4. The blades are very sharp and must not be touched by hands. To avoid injuries, the water should be very clear so that you can see the blades during the cleaning process.
5. Do not use abrasive or corrosive cleaning agents for cleaning.
6. It is strictly forbidden to sterilize all parts of this product at high temperatures.
7. After cleaning the product, dry out all of the parts before reassembling and store the machine in a good place.
8. If the product is not used for a long time, please charge and maintain the product within three months.

Important Safeguards

1. This product is a food processor with a rechargeable battery. Please fully charge it before first use.
2. Make sure that the blade is installed in place to rotate freely before adding ingredients.
3. Do not use sharp objects to scratch the machine.
4. It is strictly forbidden to overload the machine.
5. Never put the machine into a microwave oven to heat or freeze in the refrigerator to avoid damage to the machine. The bowl can be sterilized and cleaned with boiling water at 100°C.
6. This product cannot be used to process hard food, such as coffee beans, soybeans, gelatin, rice, ice cubes, or frozen food, vice versa.
7. It is strictly forbidden to touch the detachable parts such as blades and motors or the detachable parts during processing, to avoid any injury or damage.

FAQ

• Q: Can I wash the motor directly?
  • A: No, please do not wash the motor directly. Use a soft warm cloth to wipe the outside of the motor head when cleaning.
• Q: How do I know when the unit is fully charged?
  • A: The red light turns on when charging and turns off when fully charged.
• Q: Can I process hard foods like ice cubes with this mini chopper?
  • A: No, this product cannot be used to process hard foods like ice cubes or coffee beans. Avoid processing such items to prevent damage to the machine.

PARTS

WARNS!

• Please do not leave blades on the motor head along!
• Do not touch the blade with your hand!
• Please do not wash the motor directly!

Please review the manual carefully before using the product and keep it stored properly.

Using Your Mini Food Processor

1. Before first use, plug and fully charge the unit. The red light turns on when charging and turns off when full. Clean the blade, chopping cup and splash guard lid before the first use.
2. Insert the chopping blade into the centering shaft in the processing bowl. Be careful when handling the sharp blades. Add food to be processed into the glass are seeing howl than tha may lineal
3. Then insert in the lid onto the bowl, then put the motor head and secure the lid in place. Push the switch and start to process the contents. The blades will be blocked if it is overloaded when starting. Reduce the amount of the food then go on.
4. Release the switch about 15 seconds after one cycle of processing. Please continue to press and push the switch for another cycle if the food is not fine enough. After processing, remove the motor head, and then take off the splash guard from cup, nour out the food Cloan tho heads clash guard and howl!

Specification Parameters

Maintenance and Care

1. Clean the splash guard, blades and bowl immediately after using the product.
2. Do not rinse the motor head directly with water while cleaning; only use a soft warm cloth to wipe the outside of the head when cleaning.
3. When cleaning, put an appropriate amount of detergent in clean water and clean it with a cleaning pad; better cleaning with warm water.
4. The blades are very sharp and must not be touched by hands. To avoid injuries, the water should be very clear so that you can see the blades during the cleaning process.
5. Do not use abrasive or corrosive cleaning agents for cleaning.
6. It is strictly forbidden to sterilize all parts of this product at high temperatures.
7. After cleaning the product, dry out all of the parts before reassembling and storing the machine in a good place.
8. If the product is not used for a long time, please charge and maintain the product within three months.

Important Safeguards

1. This product is a food processor with a rechargeable battery. Please fully charge it before first use.
2. Make sure that the blade is installed in place to rotate freely before adding ingredients,.
3. Do not use sharp objects to scratch the machine.
4. It is strictly forbidden to overload the machine.
5. Never put the machine into a microwave oven to heat or freeze in the refrigerator to avoid damage to the machine. The bowl can be sterilized and cleaned with boiling water at 100°C.
6. This product cannot be used to process hard food, such as coffee beans, soybeans, gelatin, rice, ice cubes or frozen food, vice verse.
7. It is strictly forbidden to touch the detachable parts such as blades and motors or the detachable parts during processing, to avoid any injury or damage.
8. Do not continually work for more than 30 seconds. After continuously processing for 30 seconds, it must rest for 2 minutes before the next round. It should work for a cycle of 2 minutes in an interval of 30 seconds. After three consecutive cycles, the machine must be cooled down for at least 30 minutes before next processing in order to prolong the lifespan.
9. The blades are very sharp. Do not touch the edge directly with your hand. When removing or installing the blade, hold the top of the rod connecting to the tool.
10. Do not use steel wool, abrasive cleaners or corrosive liquids such as petrol or acetone to clean the product. The product can be rinsed directly with clean water, except for the head.
11. Do not put any parts of this machine into the dishwasher.
12. Store the product in a place that is not accessible to children. Do not allow persons, including children, with physical, sensory or mental disabilities or lack of experience and knowledge to use or play with the product.
13. This product is for personal or household use only and not for commercial use.
14. Cautions Be careful when removing the blade and emptying the cleaning bowl. Be careful when cleaning, avoiding injuries by the blade.

LIMITED WARRANTY

This unit is warranted against defective materials or workmanship for one year from the date of purchase (warranty is only valid with a dated proof of purchase). The warranty is valid for any manufacturing defects only. This warranty covers operational defects incurred in normal use and does not apply in the case of damage, abuse, mishandling, accident, or failure to follow operation instructions. During the one-year warranty period, a product with a defect will be either repaired or replaced with a reconditioned comparable model (at our option). Any return of defective merchandise to the manufacturer must be processed accordingly by contacting customer service first to obtain the Return Merchandise Authorization Number and freight prepaid with proof of purchase. (Please pack your product well; we will not be responsible for damages incurred as a result of improper packing.) We will not accept any returns of merchandise without an applicable RMA#.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>