jaycar GT4119 C Mini Chameleon Drone User Manual

jaycar GT4119 C Mini Chameleon Drone

Product Information

Specifications

• Product Name: R/C Mini Chameleon Drone
• Model Number: GT4119
• Recommended Usage: Indoors
• Play Time: Up to 5 Minutes Charging Time: Up to 90 Minutes

Product Usage Instructions

Safety

This drone is recommended for indoor use to ensure safe operation and avoid potential hazards associated with outdoor flying.

Trim Adjustment

Adjust the trim settings on the remote control to stabilize the drone during flight. Refer to the user manual for detailed instructions on trim adjustment.

Battery Safety & Landing

Ensure proper battery installation and follow the safety guidelines provided in the manual. Land the drone gently to prevent damage to the device.

Remote Control Diagram

Refer to the remote control diagram in the user manual to understand the functions and controls of the remote for operating the drone effectively.

Battery Installation & Charging

Follow the instructions for proper battery installation and charging procedures outlined in the manual to maintain battery health and ensure optimal performance.

Charging Safety

Adhere to charging safety guidelines to prevent overheating or damage to the battery. Remove the USB cable from the charger once the battery is fully charged.

Operation

Read the manual carefully to understand how to operate the drone efficiently, including features like Headless Mode, One Key Return, Flight Controls, and Speed Settings.

Blade Installation

Properly install and secure the blades on the drone according to the instructions provided to ensure safe and stable flight performance.

Warranty Information

Refer to the warranty details provided in the manual for information on coverage and procedures in case of product issues or defects.

Safety

1. This product is suitable for users that have prior operating experience or users no less than the age 14.
2. If you encounter any problems while operating or repairing this product, kindly contact us. You can find our contact information in the warranty section. We will provide you with the technical support and after-sale service.
3. This drone is recommended to fly indoors.

Warnings

1. The toy shall be used with caution since skill is required in order to control the flight and avoid collisions with the user, objects or third parties

2. Do not touch the rotating rotor, avoid loose clothing or hair that could be caught in the rotor, do not fly near the face

3. Item must play or used under adult supervision.Adult must teach children how to safely fly and control the toy

4. Please use the product outside; Use in open areas free of obstacles and people;
   Maximum operating distance is 30 meters; Keep the product within your visual range

5. It is recommended to keep the instruction manual

6. The rechargeable batteries should be removed from the toy before being charged

7. The rechargeable batteries should be charged under adult supervision

8. Different types of batteries or new and used batteries are not to be mixed,

9. Batteries are to be inserted with the correct polarity (+ and -)

10. Exhausted batteries are to be removed from the toy.

11. The supply terminals are not to be short-circuited.

Battery Safety

1. Battery should be put in the dry or well ventilated area with a room temperature of about 18-25 C.
2. In order to prolong the battery life,please avoid repeatedly charging or excessive discharging.
3. If the battery needs to be stored away for while, please charge the battery first. The battery needs to be charged to atleast 50-60% of its capacity.
4. If you do not use it for more than a month,it is highly recommended that you need to check the battery voltage every month to make sure the voltage is no less than 3V.Otherwise please do not follow step NO. (3). Remote Control Diagram

Warning

1. Different types of batteries or new and used batteries cannot be mixed.
2. Batteries must be inserted with the correct polarity.
3. Exhausted batteries need to be removed from the toy.
4. The supply terminals cannot be short-circuited.
5. Open the battery cover with the screwdriver.

Battery Installation & Charging:

1. Press and hold the battery door button and pull out the door. Then take out the battery.
2. Take out the USB charging cable and insert into the battery power port (Make sure the ports are connected correctly).
3. Connect the battery to the USB charging cable, then connect the USB plug to USB port of a computer / laptop / moblie power / adapter. While charging, the LED will light up; when fully charged, the LED will turn off.
4. Reconnect the battery to the quadcopter.
   

Play Time: Up to 5 Minutes

Charging Time: Up to 90 Minutes

Note: It is recommended to remove the USB cable from the charger when the battery has finished charging.

Charging Safety

1. When charging, please put this product in a dry or well ventilated area. Keep it away from any heat sources or explosive products.
2. Before charging, remove the batteries from the quadcopter. Charging process should be supervised by an adult to prevent an accident.
3. After flying, please do not charge the battery if the surface temperature is still not cool. Otherwise it may cause the battery to swell, this could be a fire hazard.
4. Please make sure that you use the original USB charging cable provided. If the battery has been used for a long time, or appears to be swollen, please replace them.
5. If you do not play with the quadcopter for a long time, please remove the battery.

Operation

Flight Controls

Speed Settings

The first time you turn on the drone, the initial speed is set to 40%. You will hear ONE beep. When you press the SPEED BUTTON, you will hear TWO beeps which will increase the speed level to 60%. Pressing the SPEED BUTTON again you will hear THREE beeps and this will increase the level to 100%. Pressing again will bring you back to 40% speed and you will hear ONE beep. Always learn to fly at 40% speed, and then you can increase it as you get better at flying.

Trim Adjustment

When you lift your Drone into the air, without the use of any control levers, it should HOVER in one spot. If it doesn’t, you can follow the instructions below to bring your Drone back to a perfect HOVER.

Landing

Option 1: After playing, control the drone to the ground and keep the throttle at the lowest position for 3-4 seconds or until the motor stops working. Finally switch off the transmitter and drone.

Option 2: For a fast turn off, press the one key landing button, the product will slowly land on the ground and motor will shut down.

Resetting the Drone

Pull the left stick to lower left quarter, and pull the right stick to lower right quarter (as photo), you will hear beeping sound and the LED lights begin to flash and stay on, the gyro will auto reset and keep better balance. Please notice that the drone should be put on the flat surface.

360° Flip

1. Make sure the Drone is flying at least 1.5 meters above the floor, or 1. 5 meters below a ceiling.
2. Press the Flip button on the controller, The controller will make a”Beep” sound, then flick the right hand lever in any direction, the Drone will flip in that direction.
3. You may need to push Up on the Up/Down Lever after the flip, if your battery is low on power to keep the Drone high in the air after the Flip.

Headless Mode

One Key Return

Blade Installation

The quadcopter comes with replacement blades, if the originals are broken or badly damaged. It is extremely important to use the correct blade (A or B) for replacement. The marking can be found on the blades. Using the incorrect blade will make it impossible to control the quadcopter.
(Assembly of the blades: Clip the small cap of the blade, and then aim at the shaft of the motor and press it. It may require a little force. Please be careful so you don’t break it.)

Warranty Information

Our product is guaranteed to be free from manufacturing defects for a period of 12 Months. If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for the intended purpose. This warranty will not cover modified products; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure. To claim a warranty, please contact the place of purchase. You will need to show a receipt or other proof of purchase. Additional information may be required to process your claim. Any expenses relating to the return of your product to the store will normally have to be paid by you. The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law in relation to the goods or services to which this warranty relates.

This warranty is provided by: Electus Distribution
Address 46 Eastern Creek Drive, Eastern Creek NSW 2766 | Ph. 1300 738 555

FAQ

Q: How do I activate Headless Mode on the drone?

A: To activate Headless Mode, follow the specific instructions in the user manual. Typically, it involves a combination of button presses on the remote control.

Q: What should I do if the drone drifts during flight?

A: If the drone drifts off course, adjust the trim settings on the remote control to stabilize its flight path. Refer to the manual for detailed guidance on trim adjustment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>