LG 27GS85Q 27 Inch Ultra Gear Gaming Monitor 200Hz Instruction Manual
- July 23, 2024
- LG
Table of Contents
LG 27GS85Q 27 Inch Ultra Gear Gaming Monitor 200Hz Instruction Manual
Dismantling information
The document is intended for use by end-of-life recycles or treatment facilities. It provides the basic instructions for the disassembly of LG products to remove components and materials requiring selective treatment
Product Identification
| Type of Product | Monitor |
|---|---|
| Model name | 27GS85Q,32GS85Q |
Displays must be stored in accordance with the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/19/EU and must, amongst other things, be stored in a weatherproof manner. Containers with covers must be used when storing and transporting the Displays.
Materials and components for Selective Treatment
Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the PCB assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorised handling plants.
Materials and components| Notes| Quantity of items included in
product
---|---|---
Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)| With a
surface greater than 10 square cm| O
Batteries| For Remote control| –
Internal batteries| –
Mercury containing components| display back lights| –
Liquid Crystal Displays (LCD) with a surface greater than 100 square cm|
Includes background illuminated displays with gas discharge lamps| O
Capacitors / condensers (Containing PCB/ PCT)| | –
Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter
or height| | O
External electric cables cords| Power cord| O
Signal cable| O
Gas Discharge Lamps| | –
Plastics containing Abominated Flame Retardants| | –
Components and waste containing asbestos| | –
Components, parts and materials containing refractory ceramic fibres| | –
Components, parts and materials containing radioactive substances| | –
Tools Required
List the type that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
| Tool Description | Tool information |
|---|---|
| Screw driver | |
| Nipper | |
| Plastic Hera Jig | 
Product Disassembly Process
Batteries
Batteries can easily be removed from the remote control once the back cover of
the remote control has been removed.
None
Batteries can easily be removed from the PCB Assembly once the back cover of
product has been removed.
None
PCBs and LCD Module
The back cover of the display can easily be removed by Plastic Hera Jig and
screw driver
Once removed this will expose the accessible electronic units (PCBs),
which can now be easily removed with hand and screw driver.
LCD module(together with their casing) is only left after all other parts like
electronic units and casing have been removed.
Power cord and signal cables
A Power cord plugged into the back of the display can easily be removed by
hand or cables are provided as de-attached from the product
1 HDMI 1 DP 1 Adapter 1 USB-A to B
Capacitors > 25 mm
Capacitors > 25 mm are located in the power supply units and can be removed by
nipper
Disassembly of External enclosure
Unscrew the stand base by using coin
Push button and lift the stand body and remove the screw(4EA)
Overturn the set and disassemble the latches of three edges
Re-overturn the set and disassemble screw 4EA and disassemble the PCB
disassemble screw 13EA and disassemble the cabinet
LCD Module
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>