SpeaKa PROFESSIONAL SP-SSD-B01 Electric Sit Stand Desk Instruction Manual

SpeaKa PROFESSIONAL SP-SSD-B01 Electric Sit Stand Desk

Checklist and Installation

Please check all of the components shown in the component checklist. If any of the components are missing or damaged, contact your point of purchase for a replacement.

Attaching the Crossbar

• Attach the Crossbar A to the Lifting Columns B/C . using 4 M6x35 Screws and 2 M6x20 Screws as s S-C S-B shown in the illustration.

Attaching the Side Brackets

• Turn over the desk frame with the crossbar facing up.
• Attach each Side Bracket D to the Lifting Column using 2 M6x20 Screws S-B .
• Repeat the same process to attach the other side bracket.

Attaching the Anti-Vibration Pads

• Attach the Anti-Vibration Pads S-H to the surface of the crossbar on the positions as shown.

Attaching the Feet

• Place the Lifting Column B/C upside down on the floor.
• Attaching the Foot E to the Lifting Column using 4 M6x35 Screws S-C.
• Repeat the same process to attach the other foot.

Assembling the Desktop

• Carefully place the disassembled Desktop F upside down on the floor as shown.
• Assemble the desktop with 4 Wooden Dowel Pins S-G and 3 Connecting Plates H using 18 ST4.2×13 Screws S-D.

Note: Please make sure the desktop keeps facing down while installation .

Attaching the Sync Rod

• Loose the 4 screws on the Sync Rod G and insert both ends of Sync Rod into holes found on the desk frame as shown in the illustration.
• Re-tighten the 4 screws of the assembled Sync Rod.

Drilling to the Desktop

• Attaching the assembled desk frame to the desktop through the mounting holes found on the Side Brackets and Crossbar as shown in the illustration using 8 M6x16 Screws S – A. and 2 ST4.2×16 Screws S – F.

Attaching the Controller

Adapter 1

• Connect the Controller I with the AC Adapter J .
• Insert the cable from the Lifting Column B into the Controller I.

Note:

• Do not plug into the power before the desk is fully assembled.
• Attach the Controller I to the desktop using 2 ST3.5×12 Screws S – E.

Adapter 2

• Connect the Controller U with the AC Adapter K
• Insert the Power Plug L into the AC Adapter K and secure the AC Adapter K with a strap M as shown.
• Insert the cable from Lifting Column B into the Controller O

Note

• Do not plug into the power before the desk is fully assembled.
• Attach the Controller to the desktop using 2 ST3.5×12 Screws S-E.

Cable Management

Run the cables through the Cable Clips S-1 and attach the Cable Clips to the desktop with 2 ST3.5×12 Screws S-E to ensure a clean and neat surface .

Adjusting the Desk

• Turn over the desk with the help of another person.

• There are two adjustable foot pads under each foot. If the floor isn’t even, simply turn the pad to adjust the level to make the desk stable.
  Tip: Use a bubble level (not included) to check if the desktop is even.

• Connect the desk to power. Keep holding the press on the controller to adjust the desk to the desired height.

CAUTION: At least two people are required when turning over the desk, otherwise serious bodily injuries might occur.

Control Panel For Electric Height Adjustable Desk

Operation Instruction

1. System Resetting
   When there occurs an error or the display shows “Rst”, keep pressing the “ ” button for 5 seconds after the motor stops running. You will hear a beep sound when the process is completed. The process may fail if release the “ ” button halfway.

2. “ ” Upward Movement and “ ” Downward Movement

3. Press the “ ” or “ ” and do not release until the desk reaches the desired height.

4. Memory Setting
   To store a certain height, first press “S” and it will display “S-”. Press “1”, “2” or “3” to store the current height in the setting. Once it is completed, you can have the desk move to the corresponding height by pressing “1”, “2” or “3”. Pressing any button will stop the automatic adjustment.

5. Maximum Height Limit Setting

   • To save the current height as the maximum height limit, keep pressing “S” and “ ” for 5 seconds till you hear a beep sound, the maximum height limit is saved.
   • To change the maximum height limit, adjust the desk to move to the current maximum height first, and keep pressing “S” and “ ” for 5 seconds till you hear a beep sound, the maximum height limit is deleted.

Minimum Height Limit Setting

• To save the current height as the minimum height limit, keep pressing “S” and “ ” for 5 seconds till you hear a beep sound, the minimum height limit is saved.
• To change the minimum height limit, adjust the desk to move to the current minimum height first, and keep pressing “S” and “ ” for 5 seconds till you hear a beep sound, the minimum height limit is deleted.

Lock and Unlock Functions

• To lock the controller, keep pressing “ ” and “ ” for 5 seconds till the controller displays “Loc” and a beep sound.
• To unlock the controller, keep pressing “ ” and “ ” for 5 seconds till the controller displays the current height and a beep sound.

Factory Setting
When the controller is re-installed or restored to factory settings, keep pressing “S”, “2” and “3” for 5 seconds till a beep sounds.

Timer Setting

• Press the “1” and “3” buttons, and the controller will display “x.xh”, then press the “ ” or “ ” to set up the timer (each press leads to an 0.5-hour increment). The system will exit automatically in 2 seconds after the timer is saved.
• The indicator light will be flashing on the display during timer mode. The unit emits 5 beeps when the time is up.

Parameter Settings

Keep pressing “S” for 5 seconds to enter the parameter setting page. The display shows “S-x” (“x” stands for the parameter). Press “S” to switch the parameters, press “ ” or “ ” to change the setting. Press “S” again to exit after completing setting.

Troubleshooting Guide

Instructions of Safety and Warnings

• Any failure to comply with the safety and installation instructions in this manual may cause serious bodily injury.
• Overlooking any part of the instructions, warnings, and additional information marked with the “Note” and ” may result in serious damage to the system or its components.
• Children should never be allowed to operate or touch the product without the direct supervision of an adult. Users should prevent children from being near or around the desk during operation.
• Disabilities and/or lack of experience and knowledge should be prevented from using the product unless under supervision or assistance during use and operation.
• Never sit on or exceed the rated weight of the desk.

Electrical Safety Instructions.

CAUTION
The product is powered by electricity. To avoid burns, fire, and electric shock, please read the instructions carefully.

Other Safety Instructions

CAUTION

• Remove any obstacles from the area around the desk during assembly and subsequent use.
• Organize all cords and wires to prevent any possible tripping or accidents from occurring.
• Never attempt to modify or change the desk frame or components that operate the desk.
• Don’t add anything to the adjustable junctions of the desk frame.
• The desk is rated for Indoor Use Only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>