OXS G1 G1 7.1.2 Gaming Sound System Instructions

OXS G1 G1 7.1.2 Gaming Sound System

Specifications

• Product Name: OXS Thunder Pro
• Product Model: OXS G1
• Release Date: 21st February 2024
• Edition: 1st Edition
• Language: English (ENG)

Product Usage Instructions

Preparation

1. Visit OXS’s official website on the PC and download the firmware update file from the provided link.
2. Extract the downloaded update file to find the latest firmware file: S010_SPA300DFU.bin.
3. Prepare a USB Type-C flash drive with no files in it and ensure it is formatted as FAT32 or exFAT.

Updating Procedures

1. Transfer the firmware file (S010_SPA300DFU.bin) and an MP3 song to the root directory of the USB Type-C flash drive.
2. Power on the soundbar and connect the USB Type-C flash drive to the soundbar’s USB-C port.
3. Switch the audio input source to USB and check if the MP3 song plays normally to confirm successful recognition of the flash drive.
4. To update the firmware, press OK, VOL-, and VOL+ buttons on the remote control in sequence. The soundbar will enter update mode and display UPG. Once updated, it will show UPG 100 and perform a reboot.

Check Firmware Version
Press and hold the MUTE button to display the firmware version in order: SPA-19, EP-032, BT-008, BP-023.

FAQ

Q: What should I do if my soundbar shows UPG-ER during the update?
A: Follow these steps:

1. Check the format of your USB Type-C flash drive and ensure it is FAT32 or exFAT.
2. Try unplugging the soundbar, inserting the flash drive, and then turning it back on.
3. Verify if the MP3 song on the flash drive can be played normally through the soundbar.
4. Ensure you are pressing the buttons in the correct order and method as per Step 6 and Notes 3.

OXS Firmware Update Guide

Read before use
This firmware update procedure applies to the following product:

• Product name: OXS Thunder Pro
• Product model : OXS G1

This updater has been verified to operate on the systems below: Windows® 11（Version 22H2） / Windows® 10 / Windows® 7

If you should have any questions, please contact the OXS customer support via your purchase channel.

Release note

Fixed issue

1. Disable the 15mins auto shut off feature in PC mode.
2. Fixed the static and humming noise under AUX source.
3. Update the EQ order to FPS → RAC → MOBA → STD.

Preparation

1. Visit OXS’s official website on the PC, download files from below link: https://oxsaudio.com/pages/downloads

2. Extract the downloaded update file. The extracted folder should contain below file:
   A latest firmware for general features: S010_SPA300DFU.bin

3. This update is performed by using a USB Type-C flash drive. Prepare a USB Type-C flash drive with no files in it to get started.

Notes 1:

• The USB Type-C flash drive used for upgrade must be FAT32 or exFAT. Please format your drive into FAT32 or exFAT even if it property shows “FAT32” or “exFAT”.
• The operation can only be processed through the USB-C port of the soundbar. You need a USB-A to USB-C converter, when your USB flash drive is Type-A.

Updating Procedures

1. Move the file for general features (S010_SPA300DFU.bin) and an MP3 format song to your USB Type-C flash drive’s root directory.

2. Power on the soundbar.

3. Plug the USB Type-C flash drive into the soundbar USB-C port on the back.

4. Switch the audio input source to USB.

5. Check if the MP3 format song can play normally first, in order to check if the USB Type-C flash drive can be successfully recognized by the soundbar.
   Notes 2:

   • If the MP3 song cannot play normally, please try other USB Type-C flash drives.
   • If it still does not work, please STOP the upgrade process to avoid any risk damaging the hardware.

6. To update the general features firmware:

   • Short press the OK, VOL-, and VOL+ buttons on the remote control in sequence.
     Notes 3: Short press each button within a second, but not too fast, pause a bit between each press.

   • The display screen on the front will show UPG once the soundbar has entered update mode. The display screen will show UPG 100 after the firmware update is successful.

   • After that, the soundbar shall perform a reboot by itself.

Check the firmware version

Press and hold the MUTE button to check the firmware version. The firmware version will be running through the display screen in below order: SPA-19 → EP-032 → BT-008 → BP-023

Possible Trouble Shooting:

Showing UPG-ER
This means the soundbar cannot enter the upgrade mode.

Solutions

1. Check the format of your USB Type-C flash drive. (Refer to Notes 1 above)
2. Try unplug the soundbar, plug the flash drive in the soundbar and then turn it back on.
3. Check if the MP3 format song in the flash drive can be played normally through the soundbar. (Refer to Notes 2 above)
4. Pay attention to the order and method of pressing the buttons. (Refer to Step6 and Notes 3)

21st February 2024 / 1st Edition

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>