OXS S3 2.0 Channel Soundbar User Manual

OXS S3 2.0 Channel Soundbar

WHAT’S INSIDE

• Soundbar
  

• Power adapterx1

• 3.5mmAUXcablex1

• Optical cable x 1

  ---

• Coaxiallinex1

• Batteryx2

• Expansion tube x 2

• Wall mount screwsx2

• Remotex1

• User manualx1

• Safety& Maintenance x1

• Technical Specificationsx1

DEVICE LAYOUT

Button Introductions

1. Volume down

2. Volume up

3. Power switch(stand by mode)

4. Sound mode

5. Media sources
   
   Port Introductions

6. COAX

7. Optical

8. USB

9. AUX

10. DC IN 22V:::1.8A
    

INDICATOR LIGHT

1. Volume down
   When the button is pressed, the indicator light will briefly flash, and when the volume is reduced to the lowest or kept at the lowest level, the indicator light will stay on continuously.

2. Volume up

3. Power

4. Switch sound mode
   Mode| Light Color
   ---|---
   Music| Yellow
   News| Green
   Movie| Purple

5. Switch media sources
   Port| Light Color
   ---|---
   OPT| Yellow
   COAX| White
   AUX| Green
   BT| Blue
   USB| Purple

REMOTE

SELECT SOUND MODE

HOW TO USE

WALL MOUNTING

1. 1.The distance between the two wall mount brackets is 777mm (30.59 inches).
   

2. Mark the drilling positions and drill two holes on the wall.
   

3. Insert two expansion plugs into the holes, if necessary, gently tap them with a hammer.
   

4. Secure the brackets to the wall using two screws and tighten the screws.
   

AUDIO CABLE CONNECTION: USB CONNECTION

Please select the correct audio source before connecting it to the device.

If there is no signal of input for 15 minutes after turning the sound bar on, it will automatically enter standby mode.
If the signal is interrupted while in standby mode, the speaker will automatically restore the last media source and sound mode.

OPTICAL AND COAXIAL CABLE CONNECTION

AUDIO CABLE CONNECTION: AUX CABLE

CONNECT THE POWER

1. Insert the power adapter into the DC IN sock et and then plug it into the appropriate power outlet.
   

2. The red power indicator light illuminates when the speaker is in standby mode.
   

3. Press the power button on the speaker or on the remote control.
   

BLUETOOTH FUNCTION INTRODUCTION

1.To select Bluetooth mode, briefly press the button.

2.Enable the Bluetooth function on your external device and search for Bluetooth devices.

3.Select OXS S3 from the list of Bluetooth devices.

4.To reset Bluetooth and enter pairing mode, press and hold the button for 3 seconds.

Customer Support

If you have any questions, please contact us at:
service@oxsaudio.com
We will respond within 24 hours.
Find more information on:www.oxsaudio.com

References

• OXS
• Downloads

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>