AIPHONE SBX-CON1 Conduit Box for Surface Mount Door Stations User Manual
- July 24, 2024
- AIPHONE
Table of Contents
AIPHONE SBX-CON1 Conduit Box for Surface Mount Door Stations
Product Information
Specifications
- Mounting: Secure to gang box or wall with appropriate fasterner (not provided)
- Material (front plate): Mild steel
- Material (back plate): Stainless steel
- Color: Black
- Dimensions: 11 H x 6 W x 2 D
Product Usage Instructions
Mounting
To mount the SBX-CON1 conduit box, follow these steps:
- Secure the box to a gang box or wall using appropriate fasteners (not provided).
- Ensure the conduit passthrough is aligned correctly for cable routing.
- Use the provided self-tapping screws to secure the box in place.
Conduit Passthrough
The conduit passthrough on the SBX-CON1 allows for easy cable routing. Make sure to align it properly for efficient installation.
Conduit Plug
Use the provided #14 self-tapping screw to secure the conduit plug in place for a clean and secure installation.
Contact Technical Support
For more details about the features and information above, please contact Technical Support at Aiphone Corporation by visiting their website at www.aiphone.com or calling 800-692-0200.
Overview
The SBX-CON1 is a steel conduit box for Aiphone surface-mounted door stations. It provides a surface to mount stations that are normally mounted directly to the wall. The SBX-CON1 features numerous attachment holes on the back for installation on a variety of gang boxes and surfaces, as well as templates to drill additional holes for door stations that require them.
Contents
- SBX-CON1
- One 14-10 self-tapping screw
- Four 8-32 1/2″ self-tapping screws
- Two 8-32 1-1/2″ self-tapping screws
- One T-20 tamper resistant hex bit
- One T-27 tamper resistant hex bit
- Drilling templates for IX-DV, IX-DVM, JP-DV, and JV-DV
Mounting
- Use the pre-drilled mounting holes on the back plate to attach it to the customer-supplied gang box. If attached directly to the wall without a gang box, appropriate anchors must be used.
- If a conduit cable will be used, remove the plastic plug at the bottom right of the SBX-CON1 prior to attaching the front plate. Attach the conduit connector and conduit to the box, and route the wires through the conduit into the box and out the hole at the front of the box. Otherwise, leave the plug in place.
- Attach the box to the back plate using the tab at the bottom and the #14 self-tapping screw at the top.
- Make the wiring connections to the door station. Use the provided self-tapping screws to mount the door station to the SBX-CON1. Some door station models will require holes to be drilled into the box using the appropriate template for the door station being installed.
Contact Us
For more details about the features and information above, please contact
Technical Support.
Aiphone Corporation | www.aiphone.com |
800-692-0200
FAQ
Q: Can the SBX-CON1 be used with all Aiphone surface-mounted door stations?
A: The SBX-CON1 is designed for use with models IF-DA, IX-EA, IX-DV, IX-DVM, JO-DA, JO-DV, JP-DA, JP-DV, JV-DV, KB-DAR, KB-DAR-M, and LE-D.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>