socket mobile XC100 XtremeScan Case User Guide

socket mobile XC100 XtremeScan Case

Specifications

• Charging Requirements: Min 5.0 VDC, 1 AMP Max 5.5 VDC, 3 AMPs
• Charging Time: Up to 8 hours
• Preinstalled rechargeable battery included

Product Usage Instructions

Inserting iPhone

1. Unscrew the case with an Allen wrench (included) in a counter-clockwise direction.
2. Place the iPhone inside the case.
3. Connect the charging cable to the case and verify charging before reassembly.
4. Screw the top case down in a clockwise direction, ensuring not to over-tighten.
5. Fully charge the barcode reader using a USB-C wall charger until the battery light turns solid green (up to 8 hours).

Setting up Barcode Reader

1. Download the Socket Mobile Companion app to set up your barcode reader.
2. Register your reader and complete a user survey via the app for a 90-day warranty extension.
3. If unable to install the app, pair your barcode reader directly to the host device by following the steps provided.

Inserting Scanner

1. Unscrew the case cover with the included Allen wrench in a counter-clockwise direction and remove it.
2. Slide the scanner with cover onto the charging pins of the XtremeScan case.
3. Slide the scanner into the cover until it snaps securely.
4. Tighten the screw for the scanner cover with the Allen wrench.

FAQ

Q: How can I extend my warranty coverage?

A: You can add SocketCare extended warranty coverage within 60 days of purchasing the barcode reader. The product warranty is one year from the date of purchase, with consumables like batteries and charging cables having a limited warranty of 90 days. SocketCare allows you to extend your standard one-year limited warranty up to five years from the purchase date.

How to insert iPhone

1. Step 1 : Unscrew the case with an Allen wrench (included in the package).
2. Step 2 : Place the phone inside the case.
3. Step 3 : Before reassembly, connect the charging cable to the case and verify it charges.
4. Step 4: Screw the top case down, being careful not to overtighten.
5. Step 5: Prior to first use – Fully charge your barcode reader.
   • Use a USB-C wall charger to charge batteries until the battery light turns solid green (up to 8 hours).
   • Charging Requirements: Min 5.0 VDC, 1 AMP Max 5.5 VDC, 3 AMPs
   • Important: Do not charge Socket Mobile data readers in temperatures above 100°F/40°C, as the reader may not charge properly.
   • Charging from a computer or laptop USB port will not provide enough power and could cause charging, connection, or scanning performance issues.
6. Step 6: Download the Socket Mobile Companion app to set up your barcode reader.
   • Scan the QR Code with your device to download the Companion app for free.
7. Step 7: Register your reader and complete a user survey via the Socket Mobile Companion app to activate a 90-day warranty extension.
   • If the Companion app cannot be installed, pair your barcode reader directly to the host device.
   • The steps below assume this is a first-time pairing set-up.
   • On the host device – turn off Bluetooth.
   • Power on the barcode reader.
   • Select and scan a Bluetooth connection mode barcode (see the following page).
   • On the host device – turn Bluetooth back on and pair the barcode reader.
   • Launch the desired application.

You are now ready to start scanning!

For a complete user guide: https://sckt.tech/downloads.

How to insert your scanner

1. Step 1: Unscrew the case cover with an Allen wrench (included in the package) and remove.
2. Step 3: Slide the scanner with cover onto charging pins to the XtremeScan case.
3. Step 4: Slide the scanner into the cover until it snaps securely.
4. Step 5: Tighten the screw for the scanner cover with an Allen wrench.

• Need help? Visit https://sckt.tech/support
• For device set-up : https://sckt.tech/device-set-up
• For the XS930/XG930 (Laser) model – If viewing this guide from the internet, please print barcodes to scan.
• Add SocketCare extended warranty coverage: https://sckt.tech/socketcare
• Purchase SocketCare within 60 days from the date of purchase of the barcode reader.
• Product Warranty: The barcode reader’s warranty period is one year from the date of purchase.
• Consumables such as batteries and charging cables have a limited warranty of 90 days.
• Extend your barcode reader’s standard one-year limited warranty coverage up to five years from the date of purchase.

Additional service features are available to further enhance your warranty coverage:

• Warranty period extension only
• Express Replacement Service
• One-Time Accidental Coverage
• Premium Service

Environment

• Socket Mobile is committed to combating global climate change. We back up this commitment with sensible, sustainable policies dedicated to achieving tangible results.
• Learn about the specifics of our environmental practices here: https://sckt.tech/recycling
• Important Information – Safety, Compliance and Warranty

Safety and Handling

• See Safety and Handling in the User Guide: https://sckt.tech/downloads

Regulatory Compliance

• Regulatory information, certification, and compliance marks specific to the Socket Mobile barcode scanner are available in Regulatory Compliance: socketmobile.com/regulatory-compliance.

IC and FCC Compliance Statement

This device complies with Industry Canada license-exempt RSS standard(s). This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may cause interference,
2. this device must accept any interference, including interference that may cause undesired operations.

EU Compliance Statement

• Socket Mobile hereby declares that this wireless device complies with the essential requirements and other relevant provisions. Products intended for sale within the European Union are marked with a CE Mark, which indicates compliance with applicable
• Directives and European Norms (EN), are as follows. Amendments to these Directives or ENs are included: in Normes (EN), as follows:

CONFORMS TO THE FOLLOWING EUROPEAN DIRECTIVES

• Low Voltage Directives: 2014/35/EU
• RED Directive: 2014/53/EU
• EMC Directive: 2014/30/EU
• RoHS Directive: 2015/863
• WEEE Directive: 2012/19/EC

Battery and Power Supply

• The barcode reader contains a rechargeable battery which may present a risk of fire or chemical burn if mistreated.
• Do not charge or use the unit in a car or similar place where the inside temperature may be over 60 degrees C or 140 degrees F.

Limited Warranty Summary

• Socket Mobile Incorporated warrants this product against defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase.
• Products must be purchased new from a Socket Mobile authorized distributor, or reseller, or the SocketStore on Socket Mobile’s website: socketmobile.com.
• Used products and products purchased through non-authorized channels are not eligible for this warranty support.
• Warranty benefits are in addition to rights provided under local consumer laws. You may be required to furnish proof of purchase details when claiming this warranty.
• For more warranty information: https://sckt.tech/socketcare

Fcc Statement

FCC Part 15.21 statement

Changes or Modifications that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

FCC Part 15.105 statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED statement

This Class B digital apparatus complies with Canadian ICES-003 Cet appareil NMB-003 du Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference
2. this device must accept any interference, including interference that may cause undesired operation of the device

INDUSTRY CANADA RADIATION EXPOSURE STATEMENT MPE/SAR

To comply with RSS-102 requirements, a separation distance of 20 cm must be kept between the device and the user at all times.

References

• Mobile Data Capture Solutions - Socket Mobile
• Product Support Manuals & Image Downloads - Socket Mobile
• Trade-in or Recycle Old Units, Buy Refurbished - Socket Mobile
• Data Reader Extended Warranty & Registration - Socket Mobile
• Barcode Scanner, NFC Reader Writer Support - Socket Mobile

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>