Lucci Aria stropni ventilator Installation Guide

Lucci Aria stropni ventilator

Product Specifications

• Model: LUCCI AIRFUSION ARIA CEILING FAN
• Version: V2.2 Muti-RC
• Installation Manual Version: 2.2024
• Weight Capacity: 30kg
• Mounting Height: Blades should be at least 2.3m above the floor in Europe or 2.1m above the floor in Australia
• Usage: Suitable for indoor, alfresco, and coastal areas (fully undercover with a minimum of 1 wall)

CAUTION
READ INSTRUCTIONS CAREFULLY FOR SAFE
INSTALLATION AND FAN OPERATION.

Contact:

• Beacon International Ltd
• Hong Kong Head Office: Room 05, 18/F, Kimberland Center, 55 Wing Hong Street, Cheung Sha Wan Kowloon, Hong Kong Tel +852 34915904 Fax +852 34915917
• China showroom / Office: 11/Fl, Guzhen Lighting Building B, Mid Zhongxing Road, Guzhen, Zhongshan, Guangdong, China. Tel: +86 760 8986 6388 Fax: +86 760 8986 6380
• info@beaconinternational.com
• www.beaconinternational.com

Beacon Lighting Europe GmbH

• Diessemer Bruch 170-172, 47805 Krefeld, Germany
• TEL + 49 (2151) 325 82 39
• FAX + 49 (2151) 325 70 65
• sales@beaconlighting.eu
• www.beaconlighting.eu

This fan is suitable for indoor, alfresco, and coastal areas where the fan is fully undercover with a minimum of 1 wall. This fan is not waterproof. When installed in an alfresco or coastal area, the ceiling fan must be positioned in a location protected from water, wind, and dust. Exposure to these elements will void the warranty. Mounting the fan in a situation where it is subject to water or moisture is dangerous.

THANK YOU FOR PURCHASING

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and save all instructions before using the product.

SAFETY PRECAUTIONS

1. In Europe : This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and maintenance shall not be undertaken by children without supervision.

2. In Australia : The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

3. Children should be supervised to ensure that they do not play with the appliance.

4. An all-pole disconnection switch must be incorporated into the fixed wiring, under local wiring rules.
   IN AUSTRALIA
   WARNING: FOR THE SAFE USE OF THIS FAN AN ALL-POLE DISCONNECTION

5. MUST BE INCORPORATED INTO THE FIXED WIRING UNDER THE WIRING RULES.

6. As outline in clause 7.12.2 of AS/NZS 60335-1 for meeting the minimum electrical safety of this standard.

7. Please note warranty will be void if installation is without a means for an all-pole disconnection incorporated in the fixed wiring by the wiring rules. Example: If a fan is connected to a circuit that can be isolated via an all-pole safety switch at the switchboard, then this is considered to be an all-pole disconnection to the ceiling fan electrical circuit, meeting the requirements of clause 7.12.2 of AS/NZS 60335.1.
   A single-pole switch on the active receiver input of the remote control must also be included in the wiring and located in the same room as the ceiling fan

8. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. \

9. The structure to which the fan is to be mounted must be capable of supporting a weight of 30kg.

10. The fan should be mounted so that the blades are at least 2.3 m above the floor in Europe or 2.1 m above the floor in Australia.

11. This fan is suitable for indoor, alfresco, and coastal areas where the fan is fully undercover with a minimum of 1 wall. This fan is not waterproof. When installed in an alfresco or coastal area, the ceiling fan must be positioned in a location protected from water, wind, and dust. Exposure to these elements will void the warranty. Mounting the fan in a situation where it is subject to water or moisture is dangerous.

12. Only a licensed electrician should execute the installation.

13. WARNING: If unusual wobbling or oscillating movement is observed, immediately stop using the ceiling fan and contact the manufacturer, its service agent, or suitably qualified persons.

14. The replacement of parts of the safety suspension system device shall be performed by the manufacturer, its service agent, or suitably qualified persons.

15. The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a sufficient strength to withstand 4 times the weight of the ceiling fan; the mounting of the suspension system shall be performed by the manufacturer, its service agent, or suitably qualified persons.

BEFORE INSTALLATION

Unpack your ceiling fan carefully. Remove all parts and hardware. Examine all parts, you should have the following:

Fan without light

1. Mounting bracket x 1
2. Pre-assembled fan motor, down rod, and canopy x 1
3. Blades x 4
4. Bottom cover x 1
5. Screw for mounting bracket x 2
6. Motor screws for blades x 9
7. Flat washer for blades x 9
8. Balancing kit x 1 set
9. Remote receiver x 1
10. Remote handset x 1 set

Fan with light

• Mounting bracket x 1
• Pre-assembled fan motor, down rod, and canopy x 1
• Blades x 4
• LED light kit x 1
• Screw for mounting bracket x 2
• Motor screws for blades x 9
• Flat washer for blades x 9
• Balancing kit x 1 set
• Remote receiver x 1
• Remote handset x 1 set

INSTALLING THE MOUNTING BRACKET

• The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of the blade to the nearest objects or walls.
• Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 30kg, with two long screws provided. Ensure at least 30mm of the screw is threaded into the support.

NOTE: The bracket screws provided are for use with wooden structures only. For structures other than wood, the appropriate screw type MUST be used.

Angled ceiling Installation
This fan-hanging system supports a maximum 15-degree angled ceiling installation.

HANGING THE FAN

Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.4)

INSTALLING THE FAN

Blade attachment

1. Before Installing the blades, remove the motor screws and flat washers.
2. Secure the blade on the motor by using 2 screws with washers to tighten it, ensuring they are tightened simultaneously. (Take care not to over-tighten as this can damage blades)
   Once completed, repeat the process on the remaining blades.

Installing the bottom cover (For fan without light)
Secure the bottom cover to the fan by turning it clockwise. Installing the LED light kit (For fan with light)
Attach the LED light kit to the lamp base and connect wires to the LED light kit via the quick connectors. Secure the LED light kit on the lamp base by turning the LED light kit body clockwise.

ELECTRICAL WIRING DIAGRAM

WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED ELECTRICIAN.
NOTE: AN ADDITIONAL ALL-POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED WIRING.

• Connect the “LIVE” supply wire to the “L” of the terminal block on the mounting bracket.
• Connect the “NEUTRAL” supply wire to the “N” of the terminal block on the mounting bracket.
• Connect the “EARTH” wire to the “ ” of the terminal block on the mouthing bracket.
• Connect the output connector (1) from the receiver to the connector (1) from the fan body.
• Connect the connector (2) from the fan mounting bracket to the input connector (2) from the receiver.
• Connect the connector (3) from the infrared detecter to the input connector (3) from the receiver.

FINISHING THE INSTALLATION

• After completing the electrical connection at the mounting bracket terminal block, connect the ceiling fan wiring via the quick connector plug.
• Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy and that the wires are not damaged during this step. Secure the canopy to the hanger bracket using the screws provided.

USING YOUR CEILING FAN

REMOTE CONTROL
Your ceiling fan is controlled by the remote control. Before operating the remote, the following must be considered.

• 1 x CR2032 3V battery is required to operate the remote control. Pull out the battery tray (2) by pressing the click (1) of the battery tray. Place the battery (3) on the tray and insert the tray back into the remote handset (4) indicated by the “+” polarity symbol (5). Ensure the polarity is correct as shown in the battery compartment.

OPERATING THE REMOTE:

Before you start using the remote, take the time to read through this section and get familiar with the buttons and function of each button. (Fig.11)

1. IR TRANSMITTER
2. HI button: Press the button to set the fan running at High speed.
3. MED button: Press the button to set the fan running at Medium speed.
4. LOW button: Press the button to set the fan to running at Low speed.
5. OFF button: Press the button to turn OFF the fan.
6.  7 / 8. 1Hr / 3 Hr / 6Hr fan timer button: Press the button to activate the fan timer function, the fan will turn off after running 1 hour / 3 hours / 6 hours.
7. LIGHT button: Press the button to turn ON/ OFF the light.

The LED light has a 3-step dimmable function which is controlled by an ON/OFF switch.
When the LED light is ON and at 100% brightness, press the light button “ON and then OFF within 5 seconds”, to dim the LED light. Repeat pressing ON and then OFF within 5 seconds to dim further in the following sequence: 100% brightness → 60% brightness → 10% brightness → 100% brightness.

To switch back to 100% brightness at any stage, turn OFF the luminaire, and then wait after 5 seconds turn ON the luminaire, it will reset to 100% brightness.

• The remote has a memory function. If the fan or light is turned off by the isolating switch, it will memorize and recover the last status when turned on next.
• Effective distance/location for IR remote control (Fig. 12)
• Left from center-line: Approximately 45 degrees
• Right from center-line: Approximately 45 degrees
• Distance from remote control to receiver: 5 meters max.

REVERSING SWITCH
Your ceiling fan can operate in either summer or winter mode.

• SUMMER Mode : The reverse switch shall be in the “down” (SUMMER) position to make the fan rotate in an anticlockwise direction. The airflow will be directed downwards, for cooling in summer.
• WINTER Mode : The reverse switch shall be in the “up” (WINTER) position to make the fan rotate in a clockwise direction. The airflow will be directed upwards assisting in the circulation of warm air, for energy conservation in winter.

AFTER INSTALLATION

WOBBLE:

NOTE : ceiling fans tend to move during operation because they are mounted on a rubber grommet. If the fan was mounted rigidly to the ceiling it would cause excessive vibration. Movement of a few centimeters is quite acceptable and DOES NOT suggest any problem.

• TO REDUCE THE FAN WOBBLE : Please check that all screws which fix the mounting bracket and down rod are secure.
• BALANCING KIT: A balancing kit is provided to balance the ceiling fan on the initial installation. Please refer to the instructions on how to use the balancing kit. The balancing kit can be used to assist in re-balancing should the ceiling fan become unbalanced again. Store your balancing kit away after installation for future use if required.

NOISE:
When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and frequency signals superimposed in the electricity for off-peak hot water control may cause a change in fan motor noise. This is normal. Please allow a 24-hour “settling-in” period, most noises associated with a new fan disappear during this time.
The manufacturer’s warranty covers actual faults that may develop and NOT minor complaints such as hearing the motor run – All electric motors are audible to some extent.

CARE AND CLEANING

• Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint-free cloth to avoid scratching the paint finish. Please turn off electricity power when you do so.
• Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock.
• The motor has a permanently lubricated ball bearing so there is no need to oil.

NOTE: Always turn OFF the power at the mains switch before attempting to clean your fan.

TECHNICAL INFORMATION

WARRANTY INFORMATION

• IN AUSTRALIA / NEW ZEALAND – Please refer to the separate WARRANTY STATEMENT.
• IN EUROPE – If you are a European customer please contact the retail outlet where the fan was purchased for warranty service.

Frequently Asked Questions

• Q: Can this fan be used outdoors?
  • A: This fan is suitable for indoor, alfresco, and coastal areas as long as it is fully undercover with a minimum of one wall. It is not waterproof and should not be exposed to direct water or moisture.
• Q: What should I do if the fan stops working?
  • A: If the fan stops working, first check the power supply and ensure all connections are secure. If the issue persists, contact customer support for assistance.
• Q: How do I clean and maintain the fan?
  • A: To clean the fan, turn off the power and use a soft cloth to wipe down the blades and motor housing. Avoid using abrasive cleaners or water directly on the fan. Regular maintenance will help prolong the life of the fan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>