CanSHUO CS55943T-R 4.3″ 1080P HD Split-Screen Video Baby Monitor Instruction Manual

CS55943T-R 4.3″ 1080P HD Split-Screen Video Baby Monitor
Instruction Manual

WARNING:
STRANGULATION HAZARD-Children have STRANGLED in cords. Keep this cord out of reach of children (more than 3 feet/1 meter away from the crib). Never use extension cords with AC adapters. Only use the WARNING AC Adapters provided.
WARNING
Adult assembly is required. Keep small parts away from children when assembling.
Warning Information
*Keep this instruction manual for future reference.

• For adult use only.

Setup and use your digital video baby monitor

Installing Baby Unit
A. Place the Baby Unit on a flat surface, such as a desk or shelf, or mount the camera on a wall.

B. Connect the small plug of the power adapter to the Baby Unit and the other end to a suitable electrical outlet. Only use the enclosed adapter (5V DC 1000mA). The baby unit is turned on and the power LED will be green.

C. Connecting the power supply for the Parent Unit. Connect the small plug of the power adapter to the parent unit and the other end to an electrical outlet. Only use the enclosed adapter (5V DC/1000mA). Recommend charging time of at least 3 hours before first use.

Precaution: use of battery for Parent Unit

Only charge the battery when the battery life indicator is low. Constant recharging of your battery before the low battery indicator light comes on will decrease the life of your batteries.
When the battery is low, the power on-off LED (icon) will flash red and the on-screen display battery icon will flash red indicating that the battery needs to be charged.
Notice:
If you use the parent unit for the first time, when you turn on the parent unit some boot menus will pop up on the screen, we try to expiation status and function on these menus, please according to the tips switch to the monitor system interface. When you are familiar with this monitor, you could switch off these on-screen tips on the menu.

Function of keys and LED indicators

Parent Unit

Antenna

activation mode).
Select| Menu mode (Press to select menu option)
| Up/Down| Menu mode (Press to adjust menu settings)
| Left/Right| Menu mode (Press to adjust menu settings)

Baby Unit

PAIR| Pairing button| When the camera is powered on, press It the power LED starts to blink, the camera Is in pairing mode.
---|---|---

Start to use the monitor

Status bar

Menu operation

Adjust Parent Unit LCD Brightness lighter or darker.
Adjust camera volume: Sound level from 1 to 5.
Activate or deactivate lullaby function, 5 lullabies can be chosen. When turning on a lullaby, on the Baby Unit side will always hear the ringtone from the Parent Unit.
Repeat: Repeat all lullabies.
OFF: Deactivate lullaby function.
ADD: Add an additional camera.
Step 1: Move the parent unit to the same area as the camera. Both parent and baby units are switched on.
Step 2: Select ADD in Menu. The next available camera will automatically be highlighted. Press “Select” to begin pairing.
Step 3: Within 10 seconds, press the “Pairing button” on the camera.
Step 4: Once successfully paired, the camera light will stop flashing and video will appear on the monitor screen within 20 seconds.
Delete: Delete paired camera from the list.
SCAN: Display paired cameras one by one.
View: Select and display the camera.

Zoom Out In

High: Beep Alarm is issued when the room temperature is higher than this setting.
Low: Beep Alarm is issued when the room temperature is lower than this setting.
C: Display temperature on Celsius scale.
F: Display temperature on the Fahrenheit scale.
Temperature calibration: calibrate room temperature display to your standardized one.
ON: Activate room temperature alarm function.
OFF: Deactivate room temperature alarm function.

Baby’s crying sound
level To activate Parent unit from Power saving mode
Activation sound level selection and leave audio off in power-saving mode.
Quiet: Baby cries a little bit to activate the Parent Unit.
Medium: Baby cry moderate to activate the Parent Unit.
Loud: Baby cries louder to activate the Parent Unit. Turn off the screen and leave audio
on: Keep audio continuously on when the screen is off in power-saving mode.
Sound Bar: This soundbar is designed for deaf parents to reflect sound level picked up from the camera. You can turn visual sound level indication on or off.
Explanation On/Off: We try to expiation status and function on the boot menu. You can turn the explanation on or off based on your usage.

WARNING
THIS PRODUCT CAN NOT REPLACE RESPONSIBLE ADULT SUPERVISION

• When an AC Adapter is plugged into an electrical outlet, do not the exposed end.
• Test baby monitor before first use, periodically, and when changing location of the baby unit(Camera).
• Do not use the monitor near water (Such as bathtub, Sink, etc)
• Keep parent unit away from heat sources (Such as stoves, radiators, etc)
• Make sure there is proper ventilation around the baby unit and parent unit.
• This product is not a toy. Do not allow children to play with it.
• The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• The baby monitor should not be considered a medical device. While using the baby monitor, it is strongly recommended to have an adult directly check on your baby. Premature babies or children considered at risk must be supervised by your pediatrician or other medical staff.

Battery Warning
Use only the original rechargeable battery provided.

• Do not shoot-circuit supply terminals.
• Remove the battery when the product is stored for long periods of time or when the battery is exhausted.
• Dispose of exhausted battery properly.
• Keep all batteries away from children.
• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.

Precautions

• Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
• The baby monitor works better in temperature ranging between 0°C and 40°C (32°F and 104°F)
• Do not dismantle the appliance. It does not contain any parts that may be used independently.
• Never Expose the baby monitor for long period to the sun’s direct rays and never place it next to a source of heat, in a damp or very dusty room.
• Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the
• Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
• The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

Industry Canada Statement
This device complies with the Industry Canada licence-exempt RSS standard.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica­otions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CanShuo’s baby monitor warranty policy
CanShuo will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the unit is defective in workmanship or materials. To claim your repair/replacement, the product must be returned to CanShuo together with a copy of the purchase receipt. In the absence of the purchase receipt, the warranty will be 12 months from the date of manufacture. This warranty does not apply to normal wear or damage from misuse, abuse, improper storage and handling, installation, accident, unauthorized repair, or alteration. Please contact our Customer service by Facebook CanShuo or via email for details.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>