RITASC RS-436 Bluetooth Speaker User Manual

RITASC RS-436 Bluetooth Speaker

Product Information

Specifications:

• Wireless: V5.0
• Working Distance: 10M
• Battery: 3.7V / 1500mAh
• Speaker: 4-inch x 3pcs
• Output Power: 5W*2pcs (totally 10W)
• Frequency Response: 80Hz-20KHz
• FM Radio Frequency: 87.5-108MHz
• Temperature: -30-50°C
• Dimension: W200 x D198 x H500mm

Product Usage Instructions

Charging the Speaker:

1. Use the provided USB charging cable to connect the speaker’s DC 5V port to a power source.
2. Charge the speaker for 2-3 hours until fully charged.

Playing Music:

• Bluetooth Audio Playing:

1. Turn on the speaker by pressing the ON button.
2. Press the M button to switch to Bluetooth mode.
3. On your Bluetooth-enabled device, search for the speaker and pair it.
4. Once connected, play music on your device, and adjust the volume as needed.

• Using USB or TF Card:

1. Insert a USB drive with MP3 music into the USB slot or a TF card with music into the TF card slot.
2. Press the M button to switch to USB Drive Mode for TF card playback.

• MICRO Input:
  If you want to sing using a dynamic microphone, connect it to the 6.35mm MICRO INPUT slot.

• RGB Lighting Effect:
  Short press the RGB light button to change the lighting effect.

• Power Management:
  Remember to turn off the speaker when not in use to conserve power.

Frequently Asked Questions (FAQ):

• Q: How long does the battery last on a full charge?
  A: The built-in lithium battery provides a playing time of 2-3 hours on a full charge.

• Q: What is the range of the Bluetooth connection?
  A: The speaker offers a working distance of up to 10 meters for Bluetooth connectivity.

Note:

1. Please read this manual carefully before using this speaker.
2. Connection: Bluetooth, TF card, USB, FM, and 6.35mm Dynamic Micro Input
3. Built-in recharging battery. When the battery is low, need to charge it in time.
   • If it is not used for a long time, need to turn it off to keep the power.
4. Keep this product away from the fire, liquid, etc.

Technical Parameters

1. Wireless: V5.0 dynamic micro into this slot (6.35mm).
2. Working Distance: 10M 10. RGB light: short press this button to change the RGB lighting effect.
3. Battery: 3.7V / 1500mAh
4. Speaker: 4 inchx3pcs
5. Output Power: 5W*2pcs (totally 10W) Bluetooth Audio Playing:
6. Frequency Response: 80Hz-20KHz
7. FM Radio Frequency: 87.5–108MHz
8. Temperature: -30℃-50℃
9. Dimension: W200xD198xH500mm

Battery Specification

1. Built-in Lithium Battery: 3.7V / 1500mAh
2. Playing Time: 2-3 hours
3. Charging Time: 2-3 hours

Packing List

• 1 x Speaker
• 1 x Manual
• 1 x USB Charging Cable

Key/Slot Functions

1. Button ON/OFF: turn ON/OFF this product with this switch.
2. Button M: short press this button to change the different modes.
3. UP Button: /+
   • short press this button, the music will be up to the next music.
   • long press this button, the voice will increase step by step.
4. DOWN Button:
   • short press this button, the music will be down to the next music.
   • long press this button, the voice will decrease step by step.
5. PAUSE Button:
   • short press this button, the music will pause; short press again, music will keep playing.
   • Under FM mode, long press this button, and the machine will search FM channels automatically. After searching is finished, then can short press “UP” or “DOWN” to select the FM channels you want.
6. USB SLOT: when inputting USB with MP3 music, then you can enjoy your happy time with your favorite songs.
7. TF CARD: when inputting a TF card with MP3 music, press the button M to USB Drive Mode, then it will play the music in the card automatically.
8. DC 5V: this USB port is for battery recharging. Plug the USB charging cable into the charging port, and connect the adaptor or other power sources. You need to charge this product at a time when the power is low.
9. MICRO INPUT: if you want to sing songs by dynamic micro, you can input your dynamic micro into this slot (6.35mm).
10. RGB light: short press this button to change the RGB lighting effect.

Bluetooth Audio Playing

1. Press the button “ON” to turn on the speaker, and then press “M” to be under Bluetooth Mode.
2. Check your bluetooth devices, like mobile phones, to make sure Bluetooth is ready for connection.
3. Search this speaker bluetooth in your phone list, then connect it. Once it is paired, then you can play music on your mobile phone, and you also can adjust the voice on your phone.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>