Xiaomi WPB15PDZM 10000mAh 10W Wireless Power Bank Instruction Manual

Xiaomi WPB15PDZM 10000mAh 10W Wireless Power Bank

Specifications

• Model: BHR5460GL
• Capacity: 10000mAh
• Output: 10W
• Barcode: 6934177756184 190997001491
• Model Number: WPB15PDZM

FAQs

• Q: Can I use any charger to charge this power bank?
  • A: It is recommended to use a Xiaomi charger and charging cable for optimal performance. Using other chargers may affect charging efficiency.

Product Overview

1. USB-A Port (Output)
2. USB-C Port (Input/Output)
3. Battery Level Indicator
4. Wireless Charging Indicator
5. Battery Level Check Button
6. Wireless Charging Pad

Charging

Please connect via a USB-C port when charging with a Xiaomi charger and charging cable. When charging, the indicator displays the battery level as follows:

Discharging

The product supports wireless and wired discharging simultaneously. When discharging, the indicator displays the battery level as follows:

Low-current discharge: When the power bank is not charging, double press the battery level check button to enter low-current discharge mode. In this mode, it can be used for charging small devices such as Bluetooth headsets and smart bands, and the indicators will be lit on one by one. To exit the low-current discharge mode, press the battery level check button. The device will automatically exit this mode after two hours. Wireless charging will be activated automatically once the mobile phone is placed on the pad (no need to press the battery level check button). You can also enable wireless charging by pressing or double pressing the battery level check button/connecting the power adapter to the power bank (The power bank will be on standby for wireless charging if the wireless charging indicator lights up.). To turn off the wireless charging function, press and hold the battery level check button for more than 3 seconds (The wireless charging indicator goes off). The indicator shows the working status as follows:

When the power bank is not being charged, you can press the battery level check button to enable the wireless charging function. The wireless charging function will be disabled if no device that supports wireless charging is detected after approx. 30 seconds. If a device is detected but then removed from the wireless charging pad, the wireless charging function will be disabled after approx. 30 seconds, and then the power bank enters into sleep mode*. During sleep mode, the power bank will automatically detect whether any device that supports wireless charging is on the wireless charging pad. Once detected, the wireless charging function will be enabled, and the power bank will start to charge the device.
Sleep mode: Both the wireless charging indicator and the battery level indicators are off.

Keep your phone centered on the wireless charging pad when charging wirelessly. If the phone does not begin charging right away, adjust the position until its charging icon appears. Refer to the figure below for proper device placement.

Warning

Improper use may result in battery failure, overheating, and even fire or explosion. To ensure your safety and minimize the risk of personal injury and property damage, please observe the following precautions:

• This power bank is not a toy. Please keep it away from children. Do not let children use or play with this power bank to avoid accidents.
• Make sure you use a charger that complies with the local safety standards when charging this power bank, to prevent electric shocks or damage to the battery.
• Do not expose this power bank to pressure, impact, strong vibrations, or liquids. Any of these occurrences may lead to a short circuit or cause damage to the button or its electrical circuit. When this happens, stop using the power bank immediately, and dispose of it properly.
• When this power bank becomes swollen, deformed, starts to leak, or its capacity is significantly reduced, please stop using it immediately and dispose of it properly.
• Do not charge or discharge this power bank in places where its heat dissipation may be affected, such as in your pants pocket, a closed bag, or on a bed or sofa. Make sure that the power bank is not covered by clothing, pillows, bedding, or other miscellaneous items during this process.
• When charging other devices for a long time, do not stack this power bank with other devices including phones to ensure button heat dissipation.
• Do not disassemble, or expose this power bank to pressure, impact, strong vibrations, liquids, fire, and other heat sources such as stoves, heaters, or environments with ambient temperatures higher than 60°C (140°F). When it is hot, do not leave this power bank in a car or other place that is exposed to direct sunlight.
• This power bank contains a lithium-ion polymer battery. Do not open its casing under any circumstance to avoid battery damage or safety hazards.
• Do not replace the battery by yourself. Replacing the battery with the wrong type may result in a failure of safety protection, causing an explosion or fire.
• The battery pack subjected to extremely low air pressure during use, storage, or transportation may result in explosions or leakage of flammable liquids or gases.
• Do not dispose of batteries as household waste. Dispose of them safely as per local laws and regulations.

Precautions

• Please fully charge the product on its first use.
• When charging the product or using it to charge other devices, please select the appropriate charger and charging cable.
• When charging the product or using it to charge other devices, please ensure that someone is present, and unplug the charger and charging cable after the charging is completed.
• If the battery level indicator does not light up after pressing the button, it may be because the product is in protective mode. Charge the product to restore it.
• When the product is not in use for an extended period, keep its battery level at around 50%, and store it in a cool and dry place. Avoid long-term storage of the product at full or empty battery level to extend its battery life.
• When using the power bank to wirelessly charge a device that has a protective case, make sure the case is non-metallic and has a thickness of 4 mm or less.
• If a power adapter is used to charge the power bank while wirelessly charging a device, the adapter must meet the following requirements:
  1. Have an output of 5 V/1 A or above, or Quick Charge (QC) 2.0, and support 5 W wireless charging.
  2. Have an output of 9 V or 12 V, or Quick Charge (QC) 3.0, and support 10 W wireless charging.
• Do not place cards with a magnetic strip or chip (such as an ID or bank card) near the product, as this could damage the card.
• Keep implanted medical devices including pacemakers, and cochlear implants at least 20 cm away from the power bank at all times to avoid potential interference with such devices.
• The power bank will enable overheating protection if working for a long time at the maximum power of 10V=2.25A. (After the temperature returns to normal temperature, you can press the battery level check button or re-plug the device to be charged to resume charging.)

Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual products and functions may vary due to product enhancements.

Specifications

• Model: WPB15PDZM
• Battery Type: Lithium-ion polymer battery
• Cell Capacity: 10000 mAh 3.7 V (37 Wh)
• Rated Capacity: 5600 mAh (5 V/3 A)
• Input Port: USB-C
• Output Port: USB-A/USB-C
• Input Parameters:
• Single USB-C Input: 5 V=3 A, 9 V=2.5 A
• USB-C Input (simultaneous USB-A output): 5 V=3 A
• USB-C Input (simultaneous wireless output): 5 V=2 A, 9 V=2 A, 12 V=1.5 A
• USB-C Input (simultaneous USB-A and wireless output): 5 V=3 A
• Wireless Output: 10 W Max.
• Wired Output:
  • (USB-A) 5 V=3 A, 9 V=2.23 A, 12 V=1.67 A, 10 V=2.25 A Max.
  • (USB-C) 5 V=3 A, 9 V=2.23 A, 12 V=1.67 A, 10 V=2.25 A Max.
  • (Dual-port) 5 V=3 A
• Simultaneous Wired and Wireless Output: 15 W
• Operating Temperature: 5°C to 35°C
• Wireless Charging Distance: ≤5 mm
• Operation Frequency: 110–148 kHz (<31.9 dBuA/m @ 3 m)
• Item Dimensions: 147.9 × 70.6 × 16.6 mm
• Charging Time:
  • Approx. 4 hours (using a charger with PD above 24 W, via a USB-C to USB-C cable)
  • Approx. 6 hours (using a 5 V/2 A charger, with the charging cable included)

RF Exposure Information

• This device has been tested and meets applicable limits for Radio Frequency (RF) exposure.

Caution

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Warning

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC

Federal Communications Commission Supplier’s Declaration of Conformity

This supplier’s declaration of conformity is hereby for

• Product: Xiaomi 10W Wireless Power Bank 10000
• Model Number(s): WPB15PDZM
• Brand/Trade: Xiaomi

We declare that the above-mentioned device has been tested and found in compliance with CFR 47 Part 15 Regulation and Part 18 Regulation. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Contact Information

• Responsible Party – U.S. Contact Information
• Company: Fortune Sky Inc.
• Address: 2691 Richter Ave Ste #118 Irvine, CA 92606
• Country: U.S.A.
• Telephone No.: 9018487988
• Internet contact information: Peter@fortuneskyusa.com.
• Representative of Responsible Party for SDoC
• Company: Xiaomi Communications Co., Ltd.
• Address: #019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Beijing, China, 100085
• Country: P.R.C
• Telephone No.: (86) 400-100-5678

UK declaration of conformity

Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type Xiaomi 10W Wireless Power Bank 10000 complies with Radio Equipment Regulations 2017. The full text of the UK Declaration of Conformity is available at the following internet address:
https://www.mi.com/uk/service/support/declaration.htm.

EU Declaration of Conformity

Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type WPB15PDZM complies with Directive 2014/53/EU. The full text of the EU declaration of Conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html.

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

• Manufactured by: Xiaomi Communications Co., Ltd.
• Address: #019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Beijing, China, 100085
• For further information, please go to www.mi.com.
• User Manual Version: V3.0

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>