NewRixing NR-7019W HIFI Wireless Soundbar User Manual

NewRixing NR-7019W HIFI Wireless Soundbar

Dear customer:
Thank you for choosing our product. please read all the instructions carefully and retain the manual for future use.

Presentation of the product

1. Shortpress:Wireless / AUX/ USB/TF Card mode switch /Coaxial mode conversion
   Long press: Colorful Ught flashing mode switching / Turning off colorful Ughl

2. Short press: Volume increase
   Long press: Next track

3. Short press: Volume decrease
   Long press: Previous track

4. Short press: Pause / Play

5. Long press: ON/OFF

6. LED Display

7. Coaxial socket

8. LED indicator

9. USB flash drive slot

10. TF card slot

11. AUX input

12. DC9V power adapter socket

13. Mounting holes

14. Colorful lights

Speaker and microphone charging
Wireless speakers and microphones have built-in rechargeable lithium batteries. When the battery runs out, the speaker and microphone will automatically tum off. Please charge your speakers and microphones promptly.

Remote control

Attention

1. Next/Previous track buttons will not function In AUX/Coaxial Mocle.
2. Songs select number buttons only function in the TF card / use Mocle.
3. Short press the power on/off button on remote control can soft-switches the sound bar, actually the sound bar rs not power off. Press again the sound bar will be turned on.
4. Switch the EQ sound effects by using the EO button:
5. ordinary music
6. rock music
7. pop music
8. classical music
9. Jazz music
10. country music

Charging method

Insert the DC9V power adapter into the charging port of the speaker and the other side into the power supply. After successful charging, the Indicator light below the charging port will tum on as a red LEO, and the red LEO light will turn off when the speaker is fully charged. Insert the Type-C end of the charging cable into the charging port of the microphone, and the other side Into the use port of the computer/other use charging device used on the charger or use charging device. After successful charging, the indicator light below the charging port will turn on as a red LED, and the red LED light will turn off when the microphone Is fully charged.

Important reminder

• Do not disassemble, repair or modify the speaker without authorization.
• The speaker contains a built-in lithium-ion battery, please do not discard the battery or put the speaker In the fire.
• Do not expose the speaker to rain or humid environment to prevent the speaker from being damaged.
• Do not expose the speaker to exposure to the sun or high temperature environment to prevent the speaker from being damaged.
• Do not charge the device repeatedly for a long time to avoid accelerated aging of the built-In lithium-lon battery.

Instructions for wireless microphone

• Long press the key to turn on the power of the speaker.
  Short press the – or + key to adjust a comfortable volume.

• Long press the key to turn on the microphone, then II will connect to the speaker automatically.

• When the microphone pairing Is complete, the indicator LEO will shining blue light.

Karaoke mode: Pure singing in your way

• Turn on the speaker and microphone to ensure that both are paired successfully.
• Open the music APP and select your favorite song.
• Short press the EFF button on the microphone to tum on the pure singing function: Singing mode.
• Short press the EFF button on the microphone twice to tum off the pure singing function: background music mode
• In order to save power, please remember to tum off BT speaker and microphones when you are not using them.

Magic voice on the microphone

• Tum on the speaker and microphone to ensure that both are paired successully.
• Press the EFF button on the microphone to change voice modes: Remix effect / Echo effect/Male voice/Female voice /Children’s voice.etc.

Instructions for wireless speaker

• Long press the key to turn on the power of the speaker.
  Short press the -or+ key to adjust a comfortable volume.

• Power on: The display screen lights up to display.

• Wireless connection would be the start-up mode when the speaker is turned on. ready for your wireless device.

• USB mode & TF card mode: the speaker will play songs automatically when when insert USB or TF Card.

• When the speaker is not in use, please tum off.

Wireless connection
Please Long press the (!, switch to turn OFF the power of the speaker, select wireless paring name· NR-7019W” in your device(phone, tablet, etc.). then wireless connected.

• Power on:ffash blue light, connected: blue light on. Power off: the light tum off.
• The speaker will reconnect to the last paired wireless device automatically when power on.

USB/TF Card mode
Insert the USB or TF Card. Music will play automatically.

Aux input mode
Use the included 3. 5mm auxiliary cable to connect the speaker to other audio sources devices. Music will play. Control the playlist previous or next songs only from audio sources devices.

Coaxial input mode

• Long press the c.!, key to tum on the power of the speaker.
• Insert the coaxial line, briefly press the M key to switch to coaxial Input mode, and the audio system will play the coaxial Input sound source. Short press the- key or Short press the + key to decrease or Increase the volume.
• In coaxial input mode, switching between up and down tracks can only be operated on the audio source device and cannot be operated through a wireless speaker.

Tip: Please Long press the(!,s witch to turn OFF the power of the speaker

How to use

Troubleshooting

Sound distorted| Low battery or battery nearly dead| Low battery or replace battery
---|---|---
No sound at all| Source ( Tablet, Mobile phone, Laptop. ) turned off.| Turn the source on
Speaker turned off| Turn the speaker on
Media paused on source| Play media from source
Wireless cannot connect| There are short functional obstacles in the product| Restart the speaker
Speaker has been connected with other devices| Disable wireless of other source devices and search for wireless again

Microphone specffications

Built-In rechargeable battery   3.7V / 800mAh
Operating frequency   2.4G

Sound specifications

Multiple functions

| Wireless play / USB flash drive / Colorful lights / Micro TF card /AUX input /Coaxial mode conversion

Safety Instructions

• Keep the speaker away from heat sources, direct sunlight, humidity, water and any liquids.
• Do not operate the speaker if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and / or injury to yourself and damage to speaker.
• Do not use the speaker if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Do not use the speaker with wet hands.
• Do not put objects into any of the openings.
• Keep the speaker free from dust, lint etc.
• Do not use this speaker for anything other than its intended use.
• Keep the speaker out of reach of children.
• This appliance is not a toy.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like.

Care & Maintenance

Read the following recommendations before using the Wireless Speaker. Following these you will be able to enjoy the product for many years.

• Do not expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
• Don’t use abrasive cleaning solvents to clean the unit.
• Do not expose the unit to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
• Don’t dispose of the unit in fire as it will result in an explosion.
• Don’t expose the unit to contact with sharp objects as this will cause scratches and damage.
• Don’t let the unit fall down onto the floor. The internal circuit might get damaged.
• Don’t attempt to disassemble the unit as it may get damaged if you are not professional.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Mobile device
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>