NewRixing NR-103 Outdoor Wireless Speaker User Manual
- June 6, 2024
- NewRixing
Table of Contents
NewRixing NR-103 Outdoor Wireless Speaker
DESCRIPTION OF PARTS
-
ON/OFF Switch Mode(s) Switch : Wireless / FM / USB / USB / Micro SD(TF) Card modes switch
-
Short Press: Pause / Play / Hands-free Call Long press: TWS Connection
-
Short press: Previous song
Long press: Volume decrease -
Short press: Next song
Long press: Volume increase -
LED Indicator
-
Charging port
-
USB Flash Drive Slot
-
Micro SD (TF) Card Slot
-
AUX Input
INSTRUCTIONS FOR USE
Charging the Speaker
The speaker has a built-in rechargeable battery. When the battery is drained
out, the speaker would turn off automatically. Please recharge the battery,
Operation method:
Plug the Micro USB end of the included USB rechargeable cable into the
charging port. Plug the other end into a USB port on your computer or other
devices made for USB charging. Red LED Light illuminates indicating that the
device is being charged. It needs 2-3 hours to complete charging, Once the
speaker is fully charged, the LED Light would turn OFF.
IMPORTANT REMINDERS
- Please do not disassemble, repair or transform the product.
- This product used a lithium battery, please do not discard or put it in the fire.
- Do not expose this product to rain or humidity, so as to avoid damage to the device.
- Please do not recharge the device repeatedly, or the lithium battery inside would be aging quickly.
- In the FM Radio mode, please insert the charging line to the charging port, to get better radio signals and a better listening experience.
Listening to Music Wirelessly
Please ensure that your device (Mobile Phone, Tablet, or other devices) is
paired with the Wireless Speaker to stream music wirelessly. Once it is
paired, play music from your device.
Music Mode
| ****
Function
| ****
Operation buttons
---|---|---
Playing music
| ****
Increase Volume
| ****
Long press
| ****
key
Playing music
| ****
Decrease Volume
| ****
Long press
| ****
key
Playing music
| ****
Play
| ****
Short press
| ****
key
Playing music
| ****
Pause
| ****
Short press
| ****
key
Playing music
| ****
Previous song
| ****
Short press
| ****
key
Playing music
| ****
Next song
| ****
Short press
| ****
key
Hand-free Calling Function
Please ensure you mobile phone is paired with the wireless speaker
Handsfree Mode
| ****
Function
| ****
Operation buttons
---|---|---
Incoming Call
| ****
Answer incoming call
| ****
Short press key
Incoming Call
| ****
Reject incoming call
| ****
Long press key 3 seconds
Incoming Call
| ****
End the Call
| ****
Short press key
ON the line
| ****
Increase Volume
| ****
Long press key
ON the line
| ****
Decrease Volume
| ****
Long press key
Standby mode and connected to a device
| ****
Redial last number
| ****
Short press key 2 times
TWS Connection
-
Turn ON two speaker.
-
Long press the button on any one of the wireless speakers and you will hear
“Ding Dong”, then the speakers are connected successfully in TWS mode. -
Search for “ ” in your mobile phone and pair it with this device.
-
Enjoy your music.
-
If you don’t need TWS mode, please long press the button, you will hear
“Ding Dong” voice then the speakers are not in TWS mode.
Stream music from Micro SD (TF) Card or USB Flash Drive
- Turn ON the speaker.
- Insert the Micro SD (TF) Card or USB Drive preloaded with songs, into the Micro SD (TF) Card Slot or USB Card Slot of the speaker correspondingly, sound message “Play by USB drive” or “Play by TF card” respectively will be heard. Speaker would automatically start playing songs from the Micro SD(TF) Card or USB Drive.
Listening to FM Radio
- Turn ON the speaker.
- Insert the Micro USB end of the included USB rechargeable cable into the charging port, and leave the other end of the cable open. USB rechargeable cable serves as FM Antenna while in FM Radio mode.
- Short press the button each time until it reaches FM radio mode, the sound message “The Radio Mode” will be heard.
- To AUTO-SCAN the stations, press the button once.
- It will take a few minutes to search all the stations. Once all the stations are scanned, they get registered in memory, automatically.
- Press or skip selected stations.
- Long press to increase the volume or to decrease the volume.
Play Music Through “Auxiliary” Mode
- Turn ON the speaker.
- Insert one end of the Auxiliary cable (included) into the Auxiliary port, sound message “AUX Input Mode” will be heard. Plug the other end to the audio device (such as phone / MP3 / Player / computer / tablet …..etc).
- Select your favorite song at the source device to play.
- Long press to increase the volume or press to decrease the volume.
Note: Media can be controlled only through the source devices while playing music in Auxiliary mode.
Troubleshooting
Problem | Possible Cause | Solution |
---|
Low sound level
| Source (Tablet, Mobile Phone, Laptop, etc.) volume too low.| ****
Adjust source volume.
Low battery or Battery dead| Low battery or Replace battery
Sound distorted| Low battery or Battery nearly dead| Low battery
or Replace battery.
No sound at all
| Source (Tablet, Mobile Phone, Laptop.) turned off.| ****
Turn the source on.
Speaker turned off.| Turn the speaker on.
Media paused on source.| Play media from source.
Wireless BT cannot connect
| There are short functional obstacles in the product| ****
Restart the speaker
Product has been connected with other devices
| Disable Wireless BT of other source devices and
search for Wireless BT again
SPECIFICATIONS
Wireless Version | 5.0 + EDR |
---|---|
Wireless Distance | up to 10 Metres |
Output Power / Horn Type | 1 x 3 Watts / 4 0 52mm |
FM Frequency Range | 87-108MHz |
Unit Size | L109 x H106 x D60mm |
Power Input | DC 5V ( 1A ) |
Charging Time | 3 hours |
Play time | up to 20 hours |
Built-In Rechargeable Battery | 3.7V / 1200mAh |
Micro SD (TF) Card/USB Drive | Support up to 32GB |
Multiple Functions
| Wireless Play / FM Radio / USB Drive / Hands-Free Call / TF card / AUX Input / TWS Connection
SAFETY INSTRUCTIONS
- Keep the speaker away from heat sources, direct sunlight, humidity, water, and any liquids.
- Do not operate the speaker if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion and/or injury to yourself and damage to the speaker.
- Do not use the speaker if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Do not use the speaker with wet hands.
- Do not put objects into any of the openings.
- Keep the speaker free from dust, lint etc.
- Do not use this speaker for anything other than its intended use.
- Keep the speaker out of reach of children.
- This appliance is not a toy.
- Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like.
CARE & MAINTENANCE
Read the following recommendations before using the Wireless Speaker. Following these, you will be able to enjoy the product for many years.
- Do not expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
- Don’t use abrasive cleaning solvents to clean the unit.
- Do not expose the unit to extremely high or low temperatures as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
- Don’t dispose of the unit in fire as it will result in an explosion.
- Don’t expose the unit to contact with sharp objects as this will cause scratches and damage.
- Don’t let the unit fall down onto the floor. The internal circuit might get damaged.
- Don’t attempt to disassemble the unit as it may get damaged if you are not professional.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the uses authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>