HIIXHC 2 in 1GPS Wireless Dog Fence and Outdoor Pet Barrier Instructions

HIIXHC 2 in 1GPS Wireless Dog Fence and Outdoor Pet Barrier Instructions

Wireless GPS Pet Fence/Barrier System

WARNING

Not for aggressive dogs. Do not use this product if your dog is aggressive, or if your dog is prone to aggressive behavior.Aggressive dogs could result in death or serious injury.
Risk of skin damage. Please read and follow the instruction in this manual. Proper fitness of the collar belt is important.

Product Description

This product wireless pet fence/barrier device include 2 functions,

1. Function one – the wireless GPS pet fence system uses satellites to accurately locate and define the safe area for your pets.The safe area is up to a circle of 1000 meters radius. If your dog wanders out of the safe area the fence system will automatically start stimulating. And the stimulus will immediately stop once your dog comes back to the safe area
2. ,Function two – the wireless GPS pet barrier system, only use on outdoor, which use satellites to accurately locate to keeps Pets Out of Landscaping, Pools, Gardens, Water

Features，garbage bin etc.

Main Features

1. Real wireless fence/barrier system without any wire and flags layout;
2. Maximum signal range is up to 1000 meters radius with GPS positioning technology;
3. Barrier system keep your pet from point you set up to 16FT;
4. Variety stimulus modes: warning beeper,vibration stimulus and static shock stimulus;
5. Automatically start stimulus once your dog wanders out of the safe area;
6. Flexible and adjustable stimulus intensity from 0 to 3 levels to fit various size dogs;
7. GPS fence/Barrier system is rechargeable with built-in battery and water proof;
8. Visual setup operation on LED display; 9.Over-correction protection;10. Central Point Memory

Function Keys Definitions

Power button:

• Long press: Power on or Power off the fence system
• Short press: re-positioning the central point

M button:

• Long press: set the safe area distance
• Short press: set and switch the stimulus mode
• Long press M and Up button to reset device

Up/Down button:

• adjust stimulus intensity or adjust safe area distance
• Long press Up button to enter barrier system
• Short press M button to choose 1-30 barrier point
• Short press Down button to lock barrier point
• Short press Up button to remove barrier point

LED Display:

2. Battery Indicator: blank and flashing is low battery alert
3. Beeper mode: warning tone beeper stimulus
4. Vibrate mode: Vibration stimulus
5. Static Shock mode: static shock stimulus
6. GPS Locker: lighted up when successfully acquire the GPS signal
7. GPS Signal Indicator: indicate the GPS signal strength
8. Contact Point : deliver the static shock stimulus
9. Power Jack: charge for the fence system

Power Saver: flashing “——“ on screen after 10 seconds no operation

Charging the GPS Fence System

Please fully charge the GPS fence system before use it and it will take about3 hours.
When charging the battery indicator will flash in green color and stop flashing when fully charged.
Low battery alert : when the battery indicator is blank and fast flashing it means low battery and please recharge it.

Operating Guide

Note: You should fully charge the battery before you use the GPS fence system for the first time. Charging a fully battery takes about3 hours.

Power on/off the GPS Fence System

Hold the power key until the LED display power on. Hold the power key until the LED display power off.

Acquiring the Satellite Signals

The GPS fence system must acquire satellite signals before you put it on your dog. Acquiring satellite signals will take a few minutes.

1. Go out door to an open area;
2. Power on the GPS fence system (as per Step 1above) and the LED display flash “00”; Now the GPS fence system automatically starts searching the GPS signal and positioning the central point at the current position.It will take about1-2minutes.
3. Once successfully searching and positioning the LED display will show the numbers of connected satellites and the GPS Locker on the screen will belighted up in green; short press power key to set current location as central point. if can not acquir- ing satellite signal after
4. minutes then please try again or change other place for GPS searching and

Shows the GPS signal strength

NOTICE:

1).This GPS fence system is only for outdoor usage and without shelter on top.
2).The GPS signal will be affected by the building, obsta- cle,rainy or cloudy weather and etc.
Setup the Safe Area Distance
Successfully acquire the GPS signal and then long press M button to setup the safe area boundary.

1. Long press M button;
2. Press Up/Down button to increase and decrease the safe area distance; the distance default startsfrom03 level(30meters);
3. The safe area distance setting as following:

NOTICE:

• The actual distance is 10 times of the value displayed
• The screen will turn off in 10 seconds once the position-

ing process is completed.You can press any key to reactive the screen display.
3).To avoid the remote distance is too short and the dogs will be punished unnecessarily, the minimum remote distance is limited to 30 meters.

Set up the Stimulus Mode

There are 3 kinds of stimulus for choice: tone beeper, vibrate stimulus, static shock stimulus. You can choose any one or any combination of them.
There are 3 intensity levels for vibration and static shock stimulus except tone beeper.
The stimulus mode and intensity levels as following table:

mode

levels

|

beeper

|

vibrate

|

shock

---|---|---|---
0| deactive| deactive| deactive
1| beeper| low| low
2| X| medium| medium
3| X| high| high

Stimulus settings and operation as following:

The system will automatically start stimulate when your dog go out of the safe area while stop once come back the safe area.

Note: please test the stimulus function before setting up: you can set up the stimulus mode and intensity as follow- ing:

1. Short press M button switch to beeper stimulus and then you can press Up/Down to choose “1” activate beepe r stimulus or“0”deactive beeper stimulus;
2. Short press M button switch to vibrate stimulus and then you can press Up/Down to choose “0” deactivate the vibrate stimulus or “1”,”2” or “3” activate the vibrate stimu- lus;you can choose only one intensity level every time;

Short press M button switch to static shock stimulus and then you can press Up/Down to choose “0”deactive the static shock stimulus or “1”,”2” or “3” activate the static shock stimulus;you can choose only one intensity level every time;

Over-correction Protection:

1. The vibrate or shock stimulus is a duration to 15seconds then stop for 18 seconds and which is a stimulus There are total 3 stimulus cycles for both vibrate and shock.
2. If your dog goes out of the safe area the stimulus will start from vibrate and shock stimulus at the same time (if you activate both vibrate and shock stimulus);while the stimulus will stop after all 3 cycles stimulus even though your dog is still out of the safe area to avoid over-correc-
3. When you activate the beeper stimulus there is a 3 cycles limit for it also which is same as vibrate or shockstimulus setting but it will beep during all the 3 cycles.

Put on the belt

Put the nylon belt on the fence system and wear it on your dog’s neck with proper tightness.
Important: the proper fitness and placement of the belt is important for effective training. The contact points must direct contact with your dog’s skin.

Important Notes

1. The fence system might not position the central point due to the poor satellite signal. So that, please use this fence system in an open area, which do not have high-rise buildings around it.
2. This product is only for behavioral training of pets such as dogs or cats. Do not use it on human.
3. Please keep this product away from children to avoid their playing causing unintended electric shock.
4. DO NOT leave the collar on your dog for more than 8hours per day.
5. The fence system has a built-in rechargeable battery.Please fully charge it before using,to avoid any unexpected shutdown or a dissatisfactory result during
6. When the device is put on the dog’s neck, please make sure the tightness is Being too loose or too tight will evidently affect the training effect or cause discomfort to the dog.

The Central Point Memory Function & Re-positioning The collar can memorize the central point after successfully positioning it. And the collar will remember it irrespective of whether the collar power off or run out of battery.

Re-positioning the Central Point : A) short press Power button by following conditions: satellites connected success- fully and the LED screen activate; B) if satellites connected successfully while LED screen deactivated then press any key to activate the LED screen and then follow above A) instruction

Outdoor Pet Barrier for Cats and Dogs，Keeps Pets Out of Landscaping,

Pools, Gardens, Water Features，garbage bin etc

1. Go out side and Successfully acquire the GPS signal and GPS positioning successful.
2. Long press up button to enter display “AA”
3. There are 1-30 points you can use, short press M buttonto shift 1-30 number.
4. Short press the down button to lock this position point, then button shows a lock, This pet barrier setup keeps your pets away from this position point to protects a circular area up to 16feet .
5. Press the up key to clear the lock position point. The position point will automatically replace the earliest added when the upper limit is reached.

This barrier function can be used with fence system together or separately, please follow instructions set both fence and barrier function.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>