FUJITSU UTY-TFSXJ3 Wireless WLAN Adapter User Manual
- October 30, 2023
- FUJITSU
Table of Contents
OPTIONAL PART
WLAN Adapter
DESIGN & TECHNICAL MANUAL
WLAN ADAPTER
UTY-TFSXJ3
UTY-TFSXJ4
FUJITSU GENERAL LIMITED
DR_OP011EX_01
2022.11.14
Notices:
- Product specifications and design are subject to change without notice for future improvement.
- For further details, please check with our authorized dealer.
Trademarks
“AIRSTAGE Mobile” is a trademark of FUJITSU GENERAL LIMITED.
Google Play™ is trademark of Google LLC.
App Store® is a service mark of Apple Inc., registered in the U.S. and other countries.
Copyright © 2022 Fujitsu General Limited. All rights reserved.
1. Model lineup
Model name
| Region or country
---|---
UTY-TFSXJ3|
Other than the following countries
U.S.A.
Canada
UTY-TFSXJ4
|
U.S.A. and Canada
1-1. Applicable indoor units
For applicable indoor units, refer to the product catalogue posted on Support page of the web site. https://www.fujitsu-general.com/global/support/
2. Overview
[1] LED 1 (green)
Operation status indicator.
[2] LED 2 (orange)
Wireless LAN status indicator.
[3] Setting button
Used for connecting to wireless router.
Schematic diagram
- AIRSTAGE Mobile:
-
Indoor unit
-
WLAN adapter
-
Wireless LAN router
-
Smart device
(AIRSTAGE Mobile) -
Internet
- AIRSTAGE Edge Controller:
- Indoor unit
- WLAN adapter
- Wireless LAN router
- Hub
- AIRSTAGE Edge Controller
- AIRSTAGE Cloud
2-1. Wireless LAN control
By installing AIRSTAGE Mobile on a smart device, several functions can be controlled from outside the house.
CAUTION
To prevent personal injury, property damage, or product malfunction, read the setting manual attached with the product carefully, and be sure to comply with the safety and usage precautions.
Easy setup by mobile application
Initial setup can be done by using AIRSTAGE Mobile.
Refer to the setting manual attached with the product for information on the
initial setup, operating tips, and troubleshooting.
System requirement
- AIRSTAGE Mobile (mobile application)
Before using this application, prepare the following items:
– Wireless router:
| Wireless LAN standard | IEEE802.11b/g/n |
|---|---|
| Frequency bands* |
- U.S.A., Canada: 2.4 GHz (1ch—11ch)
- Other countries: 2.4 GHz (1ch—13ch)
Network security standard|
- Open
- WEP
- WPA (PSK)
- WPA2 Personal (PSK)
- WPS for same-LAN registration
*: Usable only in the country or region where you purchased the product.
To check whether your wireless router complies with the network security
standards listed above, refer to the operation manual.
- Smartphone:
App-compliant operating system| iOS| Check the latest version of supported OS
at Google Play store or App Store.
---|---|---
Android
– User registration:
Mobile app is available on Google Play store or on App Store.
After installation of mobile app, user registration is required. For user
registration and setup information, refer to SETTING MANUAL attached with
the product.
- AIRSTAGE Edge Controller
Before using this controller, prepare the following items:
– Wireless router:
| Wireless LAN standard | IEEE802.11b/g/n |
|---|---|
| Frequency bands* |
- U.S.A., Canada: 2.4 GHz (1ch—11ch)
- Other countries: 2.4 GHz (1ch—13ch)
Network security standard|
- Open
- WEP
- WPA (PSK)
- WPA2 Personal (PSK)
- WPS for same-LAN registration
*: Usable only in the country or region where you purchased the product.
To check whether your wireless router complies with the network security
standards listed above, refer to the operation manual.
– User registration:
For user registration and setup information, refer to the manual attached with
AIRSTAGE Edge Controller.
NOTE: Combination use of AIRSTAGE Mobile and AIRSTAGE Edge Controller is prohibited.
Wireless LAN function list
NOTE: To use Wireless LAN control, user registration in advance and access to the wireless home network are required.
Item
| Mobile app|
AIRSTAGE Edge Controller
---|---|---
Air conditioning control function| Operation on/off|
○
|
○
Operation mode setting|
○
|
○
Set temperature setting|
○
|
○
Fan speed setting|
○
|
○
Airflow direction setting| Louver position adjustment (vertical/horizontal)|
○*1
|
○*1
Swing (vertical/horizontal)|
○*1
|
○*1
Timer setting| Weekly timer*2|
o
|
—
Additional function| operation setting|
○*1
|
—
ECONOMY operation setting|
o
|
o
Human sensor for energy saving setting|
○*1
|
○*1
Energy saving fan setting|
o
|
—
Outdoor unit low noise operation setting|
o
|
—
POWERFUL operation setting|
○*1
|
—
Room temperature indicator*3|
o
|
o
Remote controller prohibition (Lockout)|
—
|
o
○: Available, —: Not available
1: Different by the indoor unit function.
2: Weekly timer of wireless remote controller/wired remote controller and mobile application each have different settings. If timer settings are done from mobile application and from wireless remote controller/wired remote controller, both timer settings will be active.
*3: For using this function in VRF system, wired remote controller (2-wire) needs to be connected to the indoor unit, and the room temperature sensor on the wired remote controller should be enabled.
3. Specifications
3-1. WLAN Adapter
Unit: mm (in)
Top view
Top view Side view
Item
| Unit|
Specification
---|---|---
Maximum radio-frequency power|
mW
|
40
Dimensions
(H × W × D)| Net|
mm
|
71 × 38 × 15
in
|
2-15/16 × 1-1/2 × 9/16
Gross|
mm
|
209 × 52 × 140.5
in
|
8-1/4 × 2-1/16 × 5-9/16
Weight| Net|
g (oz)
|
90.6 (3.2) (with cable)
Gross|
229.0 (8.1)
Operating temperature range|
°C (°F)
|
0 to 46 (32 to 114.8)
4. Wiring design
4-1. System diagram
One WLAN Adapter can be connected to each indoor unit.
Single system Multiple system
- Outdoor unit
- Indoor unit
- WLAN Adapter
A, B, and C: Attached cable with this product.
Prohibited uses:
(1) Group connection of indoor units with wired remote controller
- Indoor unit
- 3 wire
- 3 wire type remote controller
- 2 wire
- 2 wire type remote controller
(2) Group connection of indoor units
- Indoor unit
- 3 wire
- 2 wire
(3) Group connection of indoor units with WLAN Adapter cable.
- Indoor unit
- Junction box
- Adapter cable
(4) Extended wiring
Extending the cable is prohibited.
- Indoor unit
- Junction box
5. Installation
CAUTION
To prevent personal injury, property damage, or product malfunction, read the setting manual attached with the product carefully, and be sure to comply with the safety precautions.
5-1. Precautions
CAUTION
-
Do not bundle the WLAN Adapter wiring with the connection cable running between the indoor and outdoor units, or the power supply cable.
-
Install the WLAN Adapter near the wireless router. (The connection will become unstable if it is placed further away, which will make using the system more difficult.)
-
Install the WLAN Adapter between the indoor unit and the wireless LAN router.
-
Certain types of wall materials may shut out the wireless communications.
-
Do not touch the indoor unit heat exchanger.
-
During installation or removal, do not to have the wire caught by any parts nor pull it hard. It may result in malfunction of the air conditioner.
-
Do not install this product in following places. Otherwise, radio communication may be interfered.
– Places exposed to direct sunlight
– Places subject to extremely high and low temperatures, such as near the outlet port of the air conditioner main body
– Near the air conditioner air inlet or outlet
– Places with high humidity
– Places near moving parts of the air conditioner main body
– Places near bottom of the air conditioner main body
– Inside or on the side of the air conditioner main body
– Near microwave ovens
– Within 1 m (40 in) of a TV or radio
– Places in the reach of children
– Near automatic control devices such as automatic door sensors or fire detectors
– Places with oil, vapor or flammable gases
– Near medical equipment, pacemakers, defibrillators or other devices
– Places where the WLAN Adapter could get wet, such as in the bathroom
– Places where the WLAN Adapter is difficult to access for maintenance -
Do not run the WLAN Adapter cable or LAN cable on the floor. You may trip on the cables.
-
Install this product in a place where the switches and buttons can be operated and where the indicator lamps can be confirmed. (In the areas as shown below.)
-
-
-
-
5-2. Installation procedure
WARNING
-
Disconnect the power supply or turn off the breaker before starting work. Failure to disconnect the power supply may lead to electric shock or fire.
-
Do not turn on the power until all installation work is complete.
-
Use the accessories or specified connection cables:
– Do not modify connection cables other than those specified.
– Do not use extension cords.
– Do not use independent blanch wiring. The allowable current will be exceeded and cause electric shock or fire. -
When installing this product, make sure that there are no children nearby. Otherwise, injury or electric shock could result.
-
-
CAUTION
-
Discharge static electricity on your body before starting work. If static electricity is not discharged, there is a risk that the circuit board components may be damaged.
-
When performing wiring work, be careful not to damage the cable or injure yourself. Also, connect the connectors securely. Loose connectors will cause trouble, heating, fire, or electric shock.
-
Perform wiring so that water does not inter this unit along the external wiring. Always install a trap to the wiring or take other countermeasures. Otherwise, it will cause trouble or electric shock or fire.
-
Do not touch the circuit board and circuit board parts directly with your hands. Otherwise, injury or electric shock could result.
-
-
With referring the setting manual, perform wire connection.
-
Install the WLAN Adapter in the direction as shown in this figure. If the WLAN Adapter is installed in the wrong direction, water may get into the adapter through the wire, causing failure.
-
Tapping screws
(Accessories)
-
GOOD
PROHIBITED
Reverse direction On the floor On a curved surface
After WLAN Adapter installation is completed, perform appropriate function setting according to the installation environment with referring the SETTING MANUAL of this product and the INSTALLATION MANUAL of the indoor unit.
6. Initial setup
NOTE: The combination use of AIRSTAGE Mobile and AIRSTAGE Edge Controller is prohibited. When switching the applications to be used, initialize the WLAN Adapter setting.
6-1. AIRSTAGE Mobile
- Visit Google Play store or App Store according to the type of connecting smart device.
- Search for AIRSTAGE Mobile in the store.
- Install the app by following the on-screen instructions.
- After completing AIRSTAGE Mobile installation on your smart device, open the app and perform user registration by following the instructions.
- Register the air conditioner according to the instruction on the app.
6-2. AIRSTAGE Edge Controller
For details of the setting procedure, refer to the ONLINE MANUAL attached to the AIRSTAGE Edge Controller.
7. Accessories
Part name
| Exterior|
Qty
---|---|---
Setting manual| |
1
ONLINE MANUALS and WEB APP sheet|
|
1
Adapter information label (attached to the WLAN Adapter with tape)*1|
|
1
Tapping screw M4 × 25 mm|
|
2
EMI core*2|
|
1
NOTES:
- *1: Do not discard the label because it contains the WLAN Adapter setting information.
- *2: It may not be used depending on the air conditioner. For details on the usage in the installation procedure, refer to the INSTALLATION MANUAL for the indoor unit.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>