PHILIPS S5966-85 Aqua Touch Wet And Dry Electric Shaver Instructions

: July 22, 2024
: Philips

Table of Contents

PHILIPS S5966-85 Aqua Touch Wet And Dry Electric Shaver
Product Usage Instructions
Introduction
General description
Using the appliance
Cleaning and maintenance
Cleaning the click-on attachments
Troubleshooting
Full Two-Year Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHILIPS S5966-85 Aqua Touch Wet And Dry Electric Shaver

Specifications

Model: S5966/96, S5966/85, S5366/95
Tripleheader shaver
Full Two-Year Warranty
45-DAY MONEY-BACK GUARANTEE

Product Usage Instructions

Important Safety Instructions
When using the electric product, follow these basic precautions:

Read all instructions before using the product.
Do not reach for a corded product that has fallen into water. Unplug immediately.
Keep the power cord dry.
Avoid placing or storing the product where it can fall into water.
Always unplug the product when not in use.

Using the Appliance
Follow these steps to use the appliance:

Make sure the shaver is fully charged.
Turn on the shaver using the power button.
Gently move the shaver over the skin in circular motions for a close shave.
After use, turn off the shaver and clean it as per the cleaning instructions.

Cleaning and Maintenance
To maintain the shaver’s performance:

Regularly clean the shaver head and blades to remove hair and debris.
Use the provided cleaning brush to dislodge any trapped particles.
You can also rinse the shaver head under running water for thorough cleaning.

Storage
Proper storage is essential:

Store the shaver in a dry place to prevent damage.
Avoid exposing the shaver to direct sunlight or high temperatures.
Keep the shaver away from moisture and water when not in use.

FAQ (Frequently Asked Questions)

Q: What should I do if my shaver stops working?
A: If your shaver stops working or malfunctions, unplug it immediately and contact Philips customer support at 1-800-243-3050 for assistance.
Q: How often should I replace the blades?
A: It is recommended to replace the blades of the shaver every 12 months for optimal performance.

IMPORTANT SAFETY INSTRUCTIONS
When using an electric product, basic precautions should always be followed, including the following:
Read all instructions before using this product.
DANGER
To reduce the risk of electric shock:

Do not reach for a corded product that has fallen into water.
Unplug immediately from the power outlet.
Keep the power cord dry.
Do not place or store the product where it can fall or be pulled into a tub or sink. Do not place or drop the product into water or other liquid.
This product does not work while it is connected to the power outlet. Except when charging, always unplug this product from the power outlet.
Remove power cord from power outlet and product before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
Use this product only for its intended household use as described in this manual. Misuse can lead to hazards or serious injuries. Do not use attachments not recommended by Philips North America LLC.
Never operate this product if it has a damaged power cord, if it is not working properly, after it has been dropped or damaged, or after the product or power cord has been dropped into water. For assistance call 1-800-243-3050.
Keep the power cord away from heated surfaces.
Never drop or insert any object into any opening.
Do not use the power cord in or near a power outlet that contains an electric air freshener to prevent damage to the power cord.
Do not use product outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Always check shaving heads (guards and cutters) before using the product. Do not use the product if cutters or guards are damaged, as injury may occur.
Always attach power cord to product first, then to power outlet. To disconnect, set all controls to ‘off’ position. Then remove power cord from power outlet.
Plug power cord directly into power outlet. Do not use an extension cord.
Unplug power cord before plugging in or unplugging the product.
Only use the power cord and other accessories supplied with the product.
The batteries used in this product may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100 °C (212 °F) or incinerate.
Only use original Philips accessories or consumables. Only use detachable power cord HQ8505.
Charge, use and store the product at a temperature between 10 °C and 35 °C.
Keep product and batteries away from fire and do not expose them to direct sunlight or high temperatures.
If the product becomes abnormally hot or smelly, changes color or if charging takes longer than usual, stop using and charging the product and contact Philips.
Do not place products and their batteries in microwave ovens or on induction cookers.
Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from heating up or releasing toxic or hazardous substances. Do not short-circuit, overcharge or reverse charge batteries.
If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse well with water and seek medical care.
When you handle batteries, make sure that your hands, the product and the batteries are dry.
To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal objects (e.g. coins, hairpins, rings). Do not wrap batteries in aluminum foil. Tape battery terminals or put batteries in a plastic bag before you discard them.
IMPORTANT: The power plug contains a transformer. Do not cut off the power plug to replace it with another plug as this will cause a hazardous condition.
SAVE THESE INSTRUCTIONS

Important

This product is waterproof. It is suitable for use in the bath or shower and for cleaning under the tap. For safety reasons, the product can therefore only be used without cord.
Because of hygiene, only one person should use the product.
Do not use a damaged appliance. Replace damaged parts with new Philips parts.
Before cleaning and storing the product, switch the product off and remove power cord from power outlet and product.
Clean the product and the attachments after each use for optimal performance.
Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids to clean the appliance.
Let the product and its attachments dry completely before storing.
Do not wrap cord around the product when storing.
Store cord and other accessories in a safe location where these will not be cut or damaged.

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

General description

Protection cap
Precision trimmer
Click-on shaving unit
Shaving unit release button
On/off button
Cleaning reminder
Replacement reminder
Travel lock symbol
Unplug for use symbol
Battery charge indicator
Socket for small plug
Power cord
Small plug
Pouch
Length selector
Click-on beard styler attachment 17 Comb for beard styler attachment 18 Click-on nose trimmer attachment
Note : The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your appliance.

The display
Cleaning reminder

Clean the shaver after every use for optimal performance (see ‘Cleaning and maintenance’). When you switch off the shaver, the cleaning reminder flashes to remind you to clean the shaver
Replacement reminder
For maximum shaving performance, replace the shaving heads every year. The shaver is equipped with a replacement reminder which reminds you to replace the shaving heads. The shaver beeps, the replacement reminder lights up and the arrows flash to indicate that you have to replace the shaving heads.
Note: After replacing the shaving heads, you can reset the replacement reminder by pressing the on/off button for 7 seconds. If you do not reset the replacement reminder, the shaver resets automatically after 9 shaves.

Travel lock

When you are going to travel, you can lock the shaver to prevent it from accidentally turning on.
Deactivating the travel lock

Press the on/off button for 3 seconds.
- While you deactivate the travel lock, the travel lock symbol lights up briefly and the shaver produces a short sound. The shaver turns on and is now ready for use again.
- ’Unplug for use’ reminder
- The ‘unplug for use’ symbol displays to remind you to disconnect the appliance from the wall socket and remove the small plug from the appliance before you switch it on.

Battery charge indicator

Quick charge: When the shaver does not contain enough energy for one shave, the battery charge indicator flashes orange quickly. When the shaver is plugged in and the battery charge indicator starts flashing white slowly, the shaver contains enough energy for one shave.
While the shaver continues to charge, the battery charge indicator flashes white slowly until the product is fully charged.
Battery low
When the battery is almost empty, the battery charge indicator flashes orange.

Battery fully charged

When the battery is full, the battery charge indicator lights up white continuously.
Note: When the battery is full, the display turns off automatically after 30 minutes.
Charging
Charging takes approx. 1 hour.
Quick charge: After approx. 5 minutes of charging, the battery contains enough energy for one full shave.
Note: You cannot use the appliance while it is charging.

Charging with the power cord

Make sure the product is turned off.
Insert the small plug into the appliance and put the power cord in the power outlet. The display of the shaver indicates that the shaver is charging.
After charging, remove the power cord from the power outlet and pull the small plug out of the appliance.

Using the appliance

Warning: Always check the appliance before you use it. Do not use the appliance if it is damaged, as this may cause injury. Always replace a damaged part with one of the original type.
Note: The appliance can only be used without cord.
Turning the shaver on and off
- TO switch on the shaver, press the on/off button once.
- To switch off the shaver, press the on/off button once.
- After switching the shaver off, the display lights up for a few seconds and shows the remaining battery.
Shaving
- This shaver is waterproof. It is suitable for use in the bath or shower and for cleaning under the tap. For safety reasons, the shaver can therefore only be used without cord.
- For the best results on skin comfort, pre-trim your beard if you have not shaved for 3 days or longer.

Dry shaving

Switch on the shaver.
Move the shaving heads over your skin in circular movements to catch all hairs growing in different directions. Make sure each shaving head is fully in contact with the skin. Exert gentle pressure for a close, comfortable shave.
Note : Do not press too hard, as this can cause skin irritation.
Turn off and clean the product after each use (see ‘Cleaning and maintenance’).

Wet shaving
For a more refreshing shave, you can also use this shaver on a wet face with shaving foam or gel.

Apply some water to your skin.
Apply shaving foam or gel to your skin.
Switch on the shaver.
Move the shaving heads over your skin in circular movements to catch all hairs growing in different directions. Make sure each shaving head is fully in contact with the skin. Exert gentle pressure for a close, comfortable shave.
Note : Rinse the shaving unit regularly to ensure that it continues to glide smoothly over your skin.
Dry your face.
Switch off and clean the shaver after each use (see ‘Cleaning and maintenance’).
Note : Make sure that you rinse all shaving foam or gel off the shaver.
Using the click-on attachments
Note: The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your product.

Using the trimmer attachment
You can use the precision trimmer attachment to touch up your beard, sideburns and moustache.

Switch on the appliance.
Hold the precision trimmer perpendicular to the skin and move it downwards while exerting gentle pressure.
Switch off and clean the trimmer after each use.

Using the beard styler attachment with comb
You can use the beard styler attachment with the comb attached to style your beard at one fixed setting or at different length settings. You can also use it to pre-trim any long hairs before shaving for a more comfortable shave.
The hair length settings on the beard styler attachment correspond to the remaining hair length after cutting and range from 1 to 5 mm.

Twist the shaving head or other attachment to remove it from the handle and press the beard styler attachment onto the handle.
Slide the comb straight into the guiding grooves on both sides of the beard styler attachment.
Press the length selector and then push it to the left or right to select the desired hair length setting.
Switch on the appliance.
Move the appliance upwards while you exert gentle pressure. Make sure the front of the comb is in full contact with the skin.
Switch off the appliance and clean the attachment after use (see ‘Deactivating the travel lock’).

Using the beard styler attachment without comb
You can use the beard styler attachment without the comb to contour your beard, moustache, sideburns or neckline to a length of 0.5 mm.

Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off the beard styler attachment. Do not pull at the sides of the comb.
Switch on the appliance.
Hold the beard styler attachment perpendicular to the skin and move the appliance downwards while you exert gentle pressure.
Switch off the appliance and clean the attachment after use (see ‘Deactivating the travel lock’).
Using the nose/ear trimmer attachment You can use the nose/ear trimmer attachment to trim your nose and/or ear hair.

Trimming nose hair
Make sure both the nose/ear trimmer attachment and nasal passages are clean before trimming.

Twist the shaving head or other attachment to remove it from the handle and press the nose/ear hair trimmer onto the handle.
Switch on the appliance.
Carefully insert the trimming head into one of your nostrils.
each nostril, making sure the side of the tip is held firmly against the skin. This reduces the tickling effect that can occur.
Switch off the appliance and clean the attachment after use (see ‘Deactivating the travel lock’). Dried nasal mucus can block the cutting element, preventing the appliance from switching on. If the cutting element is blocked, clean the attachment.

Trimming ear hair
Make sure your outer ear channels are clean and free from wax.

Switch on the appliance.
Slowly move the trimming head along the rim of the ear to remove hairs that stick out beyond the rim.
Carefully insert the trimming head into the outer ear channel.
Do not insert the trimming head more than 0.5 cm into your ear channel, as this could damage the eardrum.
Slowly turn the trimming head around to remove all unwanted hairs from your outer ear channel.
Switch off the appliance and clean the attachment after use (see ‘Deactivating the travel lock’).

Cleaning and maintenance

Cleaning the shaver

Clean the shaver after every use for optimal performance (see ‘Cleaning and maintenance’).
Note: While rinsing shaving heads, water may drip out of the base of shaver. This is a normal occurrence. Internal electric parts are in a waterproof compartment so the shaver will be protected against water damage.

Caution: Always check if the water is too hot, to prevent burning your hands.

Switch on the shaver.
Rinse the shaving unit with warm water.
Switch off the shaver. Press the release button to open the shaving unit.
Rinse the hair chamber and shaving head holder with warm water.
Carefully shake off excess water and let the shaving head holder air-dry completely.
Note : Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads.
Close the shaving head holder (‘click’).

Cleaning the click-on attachments

Never dry the trimmer or beard styler attachments with a towel or tissue, as this may damage the trimming teeth.
The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your product.

Clean the click-on attachments after each use for optimal performance.

Make sure that the appliance is switched off.
Twist the attachment to remove it from the handle.
Clean the parts thoroughly with warm water.
Tip: If rinsing the nose/ear trimmer attachment under the tap is not sufficient, press the attachment onto handle and immerse the trimming head in a glass with warm water for a few minutes. Then switch on the appliance and rinse it under the tap.
Carefully shake off excess water from the beard styler, combs and nose/ear trimmer attachments and let them air dry completely.
Never dry the cutting unit with a towel or tissue, as this may damage the trimming teeth.
Tip : For optimal performance, lubricate the teeth of the beard styler attachment with a drop of sewing machine oil regularly.

Thorough cleaning method

Note: We advise you to clean the shaving heads thoroughly once a month or when the shaver does not shave as well as it used to.

Switch off the shaver.
Press the release button to open the shaving unit.
Pull the shaving head holder off the bottom part of the shaving unit.
Turn the retaining rings counterclockwise and remove them.
Remove the shaving heads from the shaving head holder. Each shaving head consists of a cutter and guard.
Note : Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally put a cutter in the wrong shaving guard, it may take several weeks before optimal shaving performance is restored.
Clean the cutter and guard with warm water.
Put the cutter back into the guard.
Place the shaving heads in the shaving head holder.
Note : Make sure that the projections of the shaving heads fit exactly into the recesses of the shaving head holder.
Place the retaining rings back onto the shaving head holder and turn them clockwise (‘click’).
- Each retaining ring has two recesses and two projections that fit exactly in the projections and recesses of the shaving head holder.
- Turn the ring clockwise until you hear a click and the ring is fixed.
- Note: Hold the shaving head holder in your hand when you reinsert the shaving heads and reattach the retaining rings. Do not place the shaving head holder on a surface, as this may cause damage to the shaving heads.
Reinsert the hinge of the shaving head holder into the slot of the shaving unit. Close the shaving head holder.

Storage

We advise you to let the appliance and its attachments dry before you put the protection caps on the attachments or store the shaver in the pouch.
Note: The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your product.
- Put the protection cap (if supplied) on the shaver to protect it from dirt accumulation.
- Store the appliance in the pouch (if supplied).

Replacement Replacing the shaving heads
For maximum shaving performance, replace the shaving heads once a year. Replace damaged shaving heads immediately. Always replace the shaving heads with original Philips shaving heads.

Replacement reminder
The replacement reminder indicates that the shaving heads need to be replaced. The shaving unit symbol lights up continuously, the arrows flash white and you hear a beep when you switch the shaver on or off.

Switch off the appliance.
Press the release button to open the shaving unit.
Pull the shaving head holder off the bottom part of the shaving unit.
Turn the retaining rings counterclockwise and remove them. Place them aside in a safe place.
Remove the shaving heads from the shaving head holder.
Discard the used shaving heads immediately to avoid mixing them with the new shaving heads.
Place the new shaving heads in the shaving head holder.
Note: Make sure that the projections of the shaving heads fit exactly into the recesses of the shaving head holder.
Note: Hold the shaving head holder in your hand when you reinsert the shaving heads and reattach the retaining rings. Do not place the shaving head holder on a surface, as this may cause damage to the shaving heads.
Place the retaining rings back onto the shaving heads and turn them clockwise to reattach the retaining rings.
Each retaining ring has two recesses and two projections that fit exactly in the projections and recesses of the shaving head holder.
Turn the ring clockwise until you hear a click to indicate that the ring is fixed.
Reinsert the hinge of the shaving head holder
into the slot of the shaving unit. Close the shaving head holder (‘click’).
After replacing the shaving heads, you can reset the replacement reminder by pressing the on/off button for 7 seconds. Wait until you hear 3 beeps. If you do not reset the replacement reminder, the shaver resets automatically after 9 shaves.

Accessories

Replacement parts and accessories may be purchased at a store near you or on our website www.philips.com/store.
The following accessories and spare parts are available:
- SH30 Philips shaving heads
Note: The availability of the accessories may differ by country.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the product. If you are unable to solve the problem with the information below, visit www.philips.com/support, or call
1-800-234-3050 (US only) or 1-886-800-9311 (Canada only) for assistance.

Assistance

For assistance, visit our website:
www.philips.com/support or call toll free
1-800-243-3050.

Disposal

This product contains a rechargeable lithium-ion battery which must be disposed of properly.
Contact your local town or city officials for battery disposal information. You can also call 1- 800-822-8837 or visit www.call2recycle.org for battery drop-off locations.
For assistance, visit our website www.philips.com/support or call 1- 800-243-3050 toll free.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. For recycling information, please contact your local waste management facilities or visit www.recycle.philips.com.

Full Two-Year Warranty

Philips North America LLC warrants this new product against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge.
IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.*
The shaving heads (cutters and guards) are not covered by the terms of this warranty because they are subject to wear and tear.
NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply go to www.philips.com/support. It is suggested that for your protection you return shipments of product by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this warranty.
NOTE: No other warranty, written or oral, is authorized by Philips North America LLC.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you.
Read enclosed instructions carefully.

45-DAY MONEY-BACK GUARANTEE

To enjoy the closest and most comfortable shave from your new Philips Norelco Men’s Shaver, the shaver should be used exclusively for 3 weeks. This allows your hair and skin enough time to adapt to the Philips Norelco Shaving System. If, after that period of time, you are not fully satisfied with your Philips Norelco Men’s Shaver, send the product back along with dated sales receipt and we’ll refund you the full purchase price.
The product must be shipped prepaid by insured mail, insurance prepaid, have the original sales receipt, indicating purchase price and date of purchase.
We cannot be responsible for lost mail.
The product must be postmarked no later than 45 days after the date of purchase. Philips reserves the right to verify the purchase price of the product and limit refunds not to exceed suggested retail price.
To obtain money-back guarantee service, please go to www.PhilipsMoneyBack.com.
Delivery of refund check will occur 6–8 weeks after receipt of returned product.
Manufactured for:
- Philips Personal Health a division of Philips North America LLC P.O. Box 10313, Stamford, CT 06904
This symbol on the product’s nameplate means it is listed by Underwriters’ Laboratories, Inc.
Norelco and Tripleheader are registered trademarks of Philips North America LLC.
PHILIPS and Philips shield are registered trademarks of Koninklijke Philips N.V. ©2024 Philips North America LLC. All rights reserved. 3000.095.3058.3 (02/26/2024)