Aire360 600692-UL Air Styler Blowout Kit User Guide

Aire360 600692-UL Air Styler Blowout Kit

Product Information

Specifications

• Model: [Insert Model Number]
• Power: [Insert Power Rating]
• Weight: [Insert Weight]
• Dimensions: [Insert Dimensions]
• Color: [Insert Color]

Product Usage Instructions

• Before using the product, carefully read all the instructions in the manual.
• Keep the appliance away from water and other liquids to prevent electric shock.
• Do not operate the device with wet hands to avoid electrical hazards.
• Ensure the device is placed on a stable surface during operation.
• Connect the product to a power source using the provided cord.
• Turn on the device using the power button located on the control panel.
• Adjust the settings according to your preference using the control knobs.
• Use the product as intended, following the recommended guidelines for optimal results.
• Ensure the product is unplugged before cleaning to prevent accidents.
• Use a damp cloth to wipe the exterior of the device and remove any dust or dirt buildup.
• Regularly check for any signs of wear and tear and replace any damaged parts promptly.

FAQ

• Q: How often should I clean the product?
• A: It is recommended to clean the product after every few uses to maintain optimal performance.
• Q: Can I use the product with an extension cord?
• A: It is advised to directly plug the product into a power outlet to avoid any potential safety hazards.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

DANGER
KEEP AWAY FROM WATER
Electricity and water are a dangerous combination and can cause death by electric shock. Do not allow electrical cords to come into contact with water or other liquids.
ELECTRICAL APPLIANCES ARE ELECTRICALLY LIVE WHEN PLUGGED IN, EVEN IF TURNED OFF.

To reduce the risk of death by electric shock

1. Always unplug the appliance immediately after use.
2. Do not use it while bathing.
3. Do not place or store the appliance where it can fall or be pulled into a bathtub or sink.
4. Do not place in or drop into water or other liquid.
5. If the appliance falls into the water, unplug it immediately. Do not reach into the water.

Do not use the appliance near a bathtub, washbasin, or other vessel filled with water. Never place the appliance in water or any other liquid.

WARNING
To reduce the risk of burns, electrocution, fire or injury to persons:

1. An appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used on. or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a service center for examination and repair.
5. Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint. hair and the like.
7. Never use it while sleeping.
8. Never drop or insert any object into any opening.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11. Do not direct hot air toward eyes or other heat-sensitive areas.
12. Attachments may be hot during use. Allow them to cool before handling.
13. Do not place the appliance, while it is operating. on any surface.
14. While using the appliance. keep hair away from the air inlet.
15. Do not operate with a voltage converter.
16. Do not operate the appliance without an attachment.
17. The curling iron attachment is hot when in use. Do not let eyes and bare skin touch heated surfaces. Do not place the heated curling iron directly on any surface while it is hot or plugged in.

GROUND FAULT CIRCUIT INTERRUPTERS

If you must use your air styler blowout kit in the bathroom, install a GFCI now! Your local electrician can help you decide which type is best for you – a portable unit that plugs into the electrical outlet or a permanent unit installed by your electrician. The National Electrical Code now requires GFCls in the bathrooms, garages, and outdoor outlets of all new homes.
Why do you need a GFCI?

• Electricity and water don’t mix. If your air styler blowout kit falls into water while the dryer is plugged in, the electric shock can kill you, EVEN IF THE SWITCH IS “OFF”.

• A regular fuse or circuit breaker won’t protect you under these circumstances. A GFCI offers you far greater protection.

• A GFCI can save your life! Compared to that, the price is small! Don’t wait … lnstall one now!

• GFCI is a sensitive device that reacts immediately to a small electric current leak by stopping the electricity flow.

OPERATING INSTRUCTIONS

SERVICING OF DOUBLE-INSULATED APPLIANCES
In a double-insulated appliance. two systems of insulation are provided instead of earthing. No earthing means is provided on a double-insulated appliance, nor should a means for earthing be added to the appliance.
Servicing a double-insulated appliance requires extreme care and knowledge of the system. and should be done only by qualified service personnel.
Replacement parts for double-insulated appliances must be identical to the parts they replace. A double-insulated appliance is marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED”. The symbol (square within a square) may also be marked on the appliance.

• This appliance is intended for household use.
• Use on Alternating Current (60 Hz) only.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature. this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified technician. Do not attempt to defeat this safety feature.

CHECK ALCI EVERY TIME YOU USE THIS AIR STYLER BLOWOUT KIT

This air styler blowout kit is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a safety feature that renders it inoperable under some abnormal conditions, such as immersion in water. To make sure the ALCI is functioning properly and the exclusive water sensing system (ALCI) is working, perform the following test:

1. Plug in the air styler blowout kit and press the test button on the plug.
2. The air styler blowout kit will stop working. There will be an audible click and the reset button will pop out.
3. To reset the ALCI with a Reset button: Unplug the unit. Then push the Reset button in, and reinsert the plug into the outlet.
4. Be sure to repeat the test every time you use this air-styler blowout kit to confirm the ALCI is operational.
5. If the ALCI is not functioning properly, return the air-styler blowout kit to a service center.
6. If a water immersion occurs, bring this unit into a service center.
   Do not try to reset.

Should the tool go off and the Reset button pops out during use, this could indicate a malfunction in the tool. Remove the plug from the outlet and allow the tool to cool. Reset the ALCI. Reinsert the plug into the outlet.
The tool should function normally. If not, return it to a service center for examination and repair.

TEMPERATURE GUIDE

• For optimal results, select the right heat setting for your hair texture.
• See the temperature guide below to determine your heat setting. we suggest starting at a lower setting and building your way up as needed.

For best results when using Curling attachments, we recommend setting heat and speed to level 3. Refine as needed.

1. Select the desired attachment for your blowout. For blowout curls, use the Curling attachments. For a voluminous or sleek blowout, use the Oval Brush attachment.

2. To connect Curling attachments: L Align the grooves on the attachment with those on the base, then insert. Once successfully connected, you should hear a click.
   To connect Drying or Oval Brush attachments: Align the dot on the attachment with the dot on the base and insert. Once successfully connected, you should hear a click.

3. Slide the Power switch up to power on. Slide down to power off.

4. Press the Heat button until you reach your desired heat setting.
   Press and hold the Heat button to activate the Cool Shot. Lights will turn blue when activated. Release the Heat button to deactivate.

5. Press the Speed button until you reach your desired speed setting.

6. To disconnect attachments, slide the lock switch down and remove the attachment from the base.

Note: When removing curling attachments be sure to grasp the Cool Tip. Barrels may be hot to the touch.

CURLING ATTACHMENTS

1. Rough dry with Drying attachment until hair is slightly damp and free of excess moisture.
2. Connect your preferred attachment to direct curls to the right or left.
3. Use clips to divide hair into 1 – 2″ sections before styling.
4. Hold the middle of a 1 – 2″ section of hair, letting the ends hang. Bring the curling barrel about an inch behind the section. The tool will automatically grip the ends of the section and wind hair up across the barrel.
5. Hold until the section is dry, then press and hold the Heat button to activate the Cool Shot. Hold for 5 -10 seconds, then power off the tool and release the curl.
6. Repeat until all sections are styled.

OVAL BRUSH ATTACHMENT

1. Rough dry with Drying attachment until hair is slightly damp and free of excess moisture. Then connect the Oval Brush attachment.
2. Use clips to divide hair into 3 – 4″ sections before styling.
3. Place brush under the roots of a 3 – 4″ section and slowly pull through hair while applying tension. Repeat until until section is dry.
4. After drying each section, press and hold the Heat button to activate the Cool Shot and apply cool air to set your style.

FILTER CLEANING INSTRUCTIONS
This tool features an automatic Cleaning Mode that we recommend activating after manually wiping dust and buildup away.

1. Ensure the tool is unplugged. Twist the bottom of the tool to the left and pull down to remove the outer cover. Brush or wipe away dust and buildup with a soft cloth or small brush.
2. To activate Cleaning Mode, plug the tool in and immediately press and hold the Heat and Speed buttons simultaneously for 3 seconds. The tool will automatically enter Cleaning Mode and shut off after 10 seconds.
3. Put the outer cover back in place and twist to the right to lock it in.
4. Repeat once per month to maintain optimal performance.

MAINTENANCE INSTRUCTIONS

1. Make sure that the inlet and outlet grills are clear of dust and lint for proper operating performance.
2. Your air styler blowout kit is virtually maintenance-free. No lubrication is needed.
3. Always remove the plug from the outlet and allow the tool to cool before cleaning.
4. Use a soft cloth or a small brush to remove dust and lint that may have accumulated on the rear filter of the tool.
5. The air styler blowout kit exterior may be wiped clean with a damp cloth.
6. CAUTION: Never allow the power supply cord to be pulled. twisted or severely bent. Never wrap the cord tightly around the tool. Damage will occur at the high flex point of entry into the tool. causing it to rupture and short. Inspect the cord frequently for damage. Stop use immediately if damage is visible, if the unit stops or if it operates intermittently.
7. If the cord or air styler blowout kit is damaged or does not operate properly. return it to a service center for repair.
8. This air styler blowout kit has no user-serviceable parts. Do not attempt to repair the appliance yourself.
9. Remove hair from the brush after every use. To keep bristles in the best condition let the unit cool before storing.

STORAGE
When not in use, your air styler blowout kit should be disconnected and stored in a safe. dry location. out of reach of children. Do not wrap the cord around the tool. Allow the cord to hang or lie loose and straight at the point of entry into the base of the tool.

WARRANTY

T3 LIMITED WARRANTY TERMS & CONDITIONS

T Micro will repair or replace (at our option) T3 products for twenty- four (24) months from the date of purchase if they are defective in workmanship or materials. This limited warranty does not cover (1) damage due to misuse or abuse, such as incorrect voltage supply, dropping, or failure to follow enclosed instructions or (2) tampering, such as repair or attempt to repair. To obtain service under this warranty, please visit www.T3Micro.com/warranty- info to submit a warranty claim, or call us at 866-376-8880 to receive detailed instructions. You will be required to provide proof of purchase.
THIS LIMITED WARRANTY IS ONLY VALID IF THE PRODUCT IS PURCHASED FROM AN AUTHORIZED SELLER OF 13 GOODS AND IF THE ORIGINAL SERIAL NUMBER ON THE PRODUCT HAS NOT BEEN REMOVED OR OTHERWISE TAMPERED WITH.
Any implied warranties, obligations, or liabilities, including but not limited to the implied warranty of merchantability and fitness for a particular purpose, shall be limited in duration to the 24-month duration of this written limited warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
IN NO EVENT SHALL 13 BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED.
Visit www.T3Micro.com/customer-service to complete your warranty registration.

SUPPLIER’S DECLARATION OF CONFORMITY 47 CFR § 2.1077 COMPLIANCE INFORMATION

• Model Name: T3 Aire 360
• Model Description: Air styler blowout kit
• Model Number: 600690-UL, 600691-UL, 600692-UL
• Responsible Party in USA: T3 Micro, Inc. 301 Santa Monica, CA 90401 866.376.8880
• Test Report Number: 240103176GZU-001

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

No change or modification to this equipment shall be made without the express written approval of the “responsible party” as defined in the FCC’s rules.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>