Enthergic RC-A10, A13 Mini Bluetooth Stereo Radio Instruction Manual
- July 22, 2024
- Enthergic
Table of Contents
Enthergic RC-A10, A13 Mini Bluetooth Stereo Radio
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- RF Exposure: General RF exposure requirement met
- Usage: Portable with no restrictions
Product Usage Instructions
This device complies with part 15 of the FCC Rules. To ensure proper operation, please adhere to the following guidelines:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Recommended Actions
- Reorient or relocate the receiving antenna if needed.
- Increase the separation between the equipment and receiver for optimal performance.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance if required.
RF Exposure
- The device has been evaluated to meet general RF exposure requirements.
- You can use the device in portable exposure conditions without any restrictions.
FAQ
- Q: Can I use the device in areas with high interference?
- A: The device is designed to accept interference and should function properly in most environments. However, it is recommended to follow the provided guidelines for optimal performance.
- Q: Is there a specific distance I should maintain between the device and other equipment?
- A: Increasing the separation between the equipment and receiver is advised for better operation. Please refer to the user manual for specific recommendations based on your setup.
PACKAGE CONTENTS
- (1)RC-A10/A13 Mini Bluetooth Stereo Radio
- (1) Service Manual
- (1) USB-C Cable
FUNCTION INSTRUCTION
- Mode Button
- Short Press – Play/Pause Long Press – Search Radio Station
- Review Button / Back To Last Radio Station
- Cue Button/Forward To Next Radio Station
- Power Button
- Volume Button
- Telescopic Antennas
- Handle
- Charging Light – Red Color
- Radio/FM Light – Green Color
- Bluetooth Ligth – Blue Color
- Rhythm Light
- Full Range Speaker
- USB-C Port: Charge Device
OPERATING TIPS AND TROUBLESHOOTING
-
To charge the A10/A13, plug the included Type-C USB cable into a power outlet.
- Use a USB outlet to charge.
- While charging, the LED light will light up Red to inform you that it is still charging.
The light it will turn OFF when fully charged.
-
Use the Power Button to turn on the A10/A13 device. and it will automatically go into Bluetooth pairing mode.
- Hold the Power Button 2-3 seconds to turn ON/OFF the A10/A13 device.
- Make sure your device has Bluetooth on, and pair it with “A10”.
- Blue LED flashes rapidly while pairing. Once connected, the blue LED pulsates slowly once paired.
- Once the A10/A13 device is connected, you can play audio from your phone as usual.
- Use the Volume Control to change the volume and press the power button to pause/start music.
- The A10/A13 will shut off after 10 minutes if left on standby.
-
My A10/A13 device is not pairing to my phone.
- Make sure that your device’s Bluetooth mode is set to on to pair your A10.
- Pair to “A10”,
-
The Bluetooth Audio Quality sounds different with different apps.
- Different apps have different sound qualities (for example, Spotify will be different than YouTube).
-
A10/A13 devices can also be used to make and receive phone calls when connected to your mobile device via Bluetooth.
TECHNICAL SPECIFICATION
Support Bluetooth Protocol| AVCTPl .O+AVRC Pl. O+GAVDP+l .2+AVDTP.2
+AVDTP+l. 0+A2DP+l .2+Hand s-Free+Profile+1.5
+heads et+Profile+vl. 1
---|---
Product Dimension| 1 226736mm
Test Range| -40°C+80°C
Wireless Transmission Range| 20M
Transmission Power| CLASS2 +MAX+4dB
Sensitivity| -80db@0.1%+DER
Frequency Range| 2.4G-2.48GHz
Audio Signal-to-Noise Ratio| >75db
Speaker Output Power| lOW
Degr ee Of Dist ort ion| <1%
Battery Capacity| 3000mAh / 3.7V
Type-C Input| SV/2A
CAUTION
- CHOKING HAZARD on small parts(A10/A13, Cable, etc.). Not suitable for children under 3 years old.
- Opening and tampering with the A10/A13 can result in damage to your product, void of warranty, and could cause injuries.
- To clean: wipe gently with a soft dry cloth. Never submerge the A10/A13 in water.
- Only charge with power adapters that meet the requirements of the device.
- Store in a cool, dry place when not in use.
WARRANTY
- This products come with a 100-day limited warranty and have been tested thoroughly to make sure they have the highest level of dependability and compatibility.
- If a warranty defect occurs, we will repair or replace the product purchased at no charge or refund the original purchase price.
- This warranty does not cover normal wear and tear, accidental damage or misuse, modifications, or any other cause not related to either materials or workmanship.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
CUSTOMER SERVICE INFORMATION
For service on any defective product under the 100-day warranty policy, please
contact Customer Service. We reserve the right to require the return of the
defective product and proof of purchase.