A2D2V1 Smart WiFi Enabled Stream Instructions
- July 23, 2024
- A2D2
Table of Contents
A2D2V1 Smart WiFi Enabled Stream Instructions
Thank you for your A2D2 purchase. We’ll have you listening to your favourite music in no time. Just follow these simple steps.
- Plug A2D2 into a USB power supply.
- Join the Wi-Fi network created by A2D2 (format A2D2-xxxx).
- Enter password 123456789
- Browse to http://10.0.0.10 using the device you joined to A2D2’s Wi-Fi network.
- Follow the setup guide.
- Reconnect by visiting http://a2d2.local Optional: Once set up, connect A2D2 to your network using an ethernet (Cat5/5e/6) cable.
- You’re good to go. Enjoy! If you need further help, email support@a2d2.net
EU Declaration of Conformity
Manufacturer: Tiger Global Limited
Address: Unit 3, Stirling Court, Borehamwood,
Herts, WD6 2BT, UK
Equipment: A2D2 Stream
Model: A2D2V1
Product Code: A2D2
Supplied Accessories: USB Cable
We, Tiger Global Limited, declare under our sole responsibility that the above
referenced product complies with the following directives:
RED 2015/53/EU
The following standards have been applied:
EN 55032:205/A1:2020/EN 55035:2017/A11:2020
EN 301 489-1 V2.2.3 (2019-11)
EN 301 489-17 V3.2.4 (2020-09)
EN 300328 V2.2.2 (2019-07)
EN 62311:2017
EN IEC 62368-1:2020+A11:2020
Signed for and on behalf of Tiger Global Limited
Name: Peter Fealey
Position: Product Manager
Signature:
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environmentv.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>