HIKMICRO HABROK 4K Series Multi Spectrum Binocular User Guide
- July 20, 2024
- HIKMICRO
Table of Contents
HIKMICRO HABROK 4K Series Multi Spectrum Binocular
Product Information
Specifications:
- Brand: HIKMICRO
- Model: HABROK 4K SERIES
- Usage: Daytime digital and thermal binocular
- Thermal Detector: 12m for quick scanning
- Digital Detector: Advanced 4K with 5.5x to 22x @60mm lens
- Laser Rangefinder: Up to 1000m distance measurement
Product Usage Instructions
Introduction
The HIKMICRO HABROK 4K series is a powerful digital and thermal binocular designed for daytime use. It is suitable for activities like hunting, birding, animal searching, adventuring, and rescuing in various weather conditions.
Package Content
The package includes the binocular device with various components such as eyepieces, focus ring, thermal lens, infrared light, laser rangefinder, digital lens, charging status indicator, battery compartment, neck strap attachment point, diopter adjustment ring, and tripod mount.
Appearance
The appearance of the binoculars may vary based on different models. Components like eyepieces are used to view the target, while the focus ring adjusts focus for clear targets. The thermal lens helps in viewing targets in dark environments.
Button Descriptions
The device features various buttons for different functions:
- Power: Standby mode/wake-up device.
- Capture: Capture snapshots or start/stop recording videos.
- Measure: Turn on/off laser ranging.
- Mode Menu: Switch palettes or navigate menu settings.
- Zoom: Adjust digital zoom or enable/disable Picture-in-Picture mode.
Install Battery
To install batteries:
- Slide to unlock and open the battery compartment cover.
- Insert batteries following the positive and negative marks.
- Close the battery compartment cover and slide to lock it.
FAQ
- Q: How do I adjust the focus on the binoculars?
- A: To adjust focus, use the focus ring on the binocular until the target appears clear.
- Q: What is the range of the laser rangefinder?
- A: The laser rangefinder can measure distances up to 1000 meters.
Introduction
HIKMICRO HABROK 4K series is a powerful and innovative digital and thermal binoculars designed especially for daytime use. This all-in-one binocular can be mainly applied in forest & field hunting, birding, animal searching, adventuring, and rescuing in various weather conditions.
- 12 μm thermal detector for quick scanning and searching.
- Advanced 4K digital detector with 5.5x to 22x @60 mm lens for excellent detail recognition capability in true living color.
- Precise built-in laser rangefinder capable of measuring distances up to 1000 m.
Package Content
Device (× 1), Battery (× 4), Neck Strap (× 1), Tripod Adapter (× 1), Battery
Charger (× 1), Type-C Cable (× 1), Lint-free Cloth (× 1), and Quick Start
Guide (× 1).
Appearance
The appearance may vary according to different models. Please take the actual product for reference.
1 & 3
|
Eyepiece
| The piece placed closest to the eye to view the target. Adjust the
interpupillary distance by moving the eyepieces farther or closer to each
other.
---|---|---
2| Buttons| To set functions and parameters.
4 & 9| Focus Ring| Adjusts focus to obtain clear targets.
5| Thermal Lens| For thermal imaging.
6| Infrared Light| Helps to view the target clearly in the dark environment.
7| Laser Rangefinder| Measures the distance to the target with a laser.
---|---|---
8| Digital Lens| For digital imaging.
10| Type-C Interface| To connect the device to power supply or transmit data
with a type-C cable.
11
|
Charging Status Indicator
| Indicates the charging status of the device.
w Flashing Red & Green: Error occurred.
w Solid Red: Charging.
w Solid Green: Fully charged.
12 & 16| Battery Compartment| For holding the battery.
13 & 17| Neck Strap Attachment Point| Mounts the neck strap.
14 & 18| Diopter Adjustment Ring| Adjust the dioptric setting.
15| Tripod Mount| Mounts the tripod.
Button Description
| Power| Press: Standby mode/Wake up device.
Hold: Power on/off.
The power indicator stays solid red when the device is on.
---|---|---
| Capture| Press: Capture snapshots.
Hold: Start/Stop recording videos.
|
Measure
| Press: Turn on laser ranging.
Double Press: Turn off laser ranging.
Hold: Correct non-uniformity of display (FFC).
|
Mode
| Non-Menu Mode:
Press: Switch palettes.
Hold: Switch day/night/auto mode. Menu Mode: Press to move up.
|
Menu
| Non-Menu Mode: Press to enter the menu. Menu Mode:
Press: Confirm/Set parameters.
Hold: Save and exit menu.
| Zoom| Non-Menu Mode:
Press: Switch digital zoom.
Hold: Turn on/off PIP (Picture-in-Picture). Menu Mode: Press to move down.
---|---|---
Install Battery
Steps:
- Slide to unlock and open the battery compartment cover.
- Insert batteries into the battery compartment as the positive and negative marks indicate.
- Close the battery compartment cover and slide to lock it.
Note
- Charge the device for more than 5 hours before first use.
- Remove the battery if the device is not used for a long time.
- The external rechargeable battery type is 18650, and the battery size should be 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the battery capacity is 3200 mAh.
- To ensure better conductivity, if the battery compartment cover gets dirty, use a clean cloth to wipe the thread.
Mount Neck Strap
Steps:
- Thread one end of the neck strap through a neck strap attachment point.
- Thread the neck strap through the strap buckle and fasten the neck strap, as shown in the picture.
- Thread the neck strap through the strap keeper.
- Repeat the above steps to finish mounting, and adjust the length of neck strap as needed.
Mount Tripod Adapter
Steps:
- Insert the location column (1) to the location point (2).
- Rotate the tripod adapter screw clockwise to fix the tripod adapter.
Charge Device
Steps :
- Lift the type-C interface cover.
- Connect the device and power adapter with a type-C cable to charge the device.
Note
- The charging temperature should be from 0 °C to 45 °C (32 °F to 113 °F).
- Please charge the device after the battery is installed in the battery compartment of the device.
- You can use the battery charger to charge the battery.
App Connection
Firmware Upgrade
- Browse and Download
- Remote Control
- Preview
- HIKMICRO Academy
- Online Service
Steps:
- Scan the QR code to download and install the app.
- Select in the device menu to enable hotspot.
- Turn on WLAN of your phone and connect to the device hotspot.
- Hotspot Name : HIKMICRO_Serial No.
- Hotspot Password: Serial No.
- Open the app and connect your phone to the device. You can view the device interface on your phone.
More Operations
Scan the QR code below to obtain the user manual for more operations.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>