resistex ARGOS DECO UGR SMD LED Board Restored Flux 4067lm Installation Guide
- July 20, 2024
- resistex
Table of Contents
resistex ARGOS DECO UGR SMD LED Board Restored Flux 4067lm
Product Information
Product Specifications:
- Model: APE 2740Z
- Siret Number: 487 593 477 00010
- Capital: SAS CAPITAL 649979
- Voltage: 73 487 593 477
- Version: V1.1 – 05.24
Product Usage Instructions
Installation Instructions:
Safety Notes:
- Never works when voltage is present on the luminaire.
- The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
- Risk of electrostatic discharges (ESD Norm). Handle with precautions.
- Please observe the notes and steps described in the mounting instructions.
Maintenance Instructions:
- Do not use chemicals or abrasives products to clean the fixture.
- Keep these instructions for dismantling or future maintenance.
You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com. RESISTEX cannot be responsible for any misuse of the product.
Mounting/Installation Instructions:
Follow the steps outlined in the installation manual for mounting or
installing the product properly. Ensure all components are securely attached
according to the provided instructions.
Kit Contents:
- Kit Suspension
- Kit Plafonnier
Refer to the numbered steps provided in the manual for the correct assembly of the product.
Frequently Asked Questions (FAQ):
-
Q: Can I clean the fixture with chemicals?
A: No, do not use chemicals or abrasives products to clean the fixture as it may damage the product. -
Q: Who should perform the installation?
A: The installation must be performed by a professional installer in compliance with electrical installation standards and regulations.
Safety notes
- Never works when voltage is present on the luminaire.
- The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations
- Risk of electrostatic discharges. (ESD Norm). Handle with precautions.
- Please observe the notes and steps described in the mounting instructions.
Maintenance instructions
- Do not use chemicals or abrasives products to clean the fixture.
- Keep these instructions for dismantling or future maintenance. You can consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.
- RESISTEX cannot be responsible for any misuse of the product.
INSTALLATION INSTRUCTION
KIT PLAFONNIER
KIT SUSPENSION
Contact Information
- RESISTEX EXPLOITATION, 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche – France
- Tél. 04 93 276 276
- Fax 04 93 276 280
- E-mail contact@resistex-sa.com
- Web www.resistex-sa.com.
- APE 2740Z – Siret 487 593 477 00010 – SAS CAPITAL 649979 € – T.V.A. F.R. 73 487 593 477.