PHILIPS DST Series, Azur 8000 Series Steam Iron User Guide
- July 20, 2024
- Philips
Table of Contents
PHILIPS DST Series, Azur 8000 Series Steam Iron
Specifications:
- Model Numbers : DST8030, DST8040, DST8041, DST8050
- Power: 2500-3000W
- Voltage: 220-240V
- Frequency: 50-60Hz
- Operating Conditions:
- Relative Humidity: 20% – 95%
- Air Pressure: 85 – 109kPa
Product Usage Instructions:
What is in the Box?
How to Use
Instructions
- Figure 5 :
- To change steam settings, tilt iron up slightly (>20⁰) and press steam utton on the handle.
- To change steam settings, tilt iron up slightly (>20⁰) and press steam utton on the handle.
Preparing for use
- Smoke can be visible during the first use, and it is normal. This ceases after a short while.
- Fig 7-1: Steam comes out when you move, steam stops when you stop moving or lift up the iron.
- Changing Steam Settings:
To adjust the steam settings, slightly tilt the iron upwards (>20 degrees) and press the steam button on the handle.
How to press
Steam Functionality:
When moving the iron, steam will be emitted, and it will stop when you pause
or lift the iron.
- Press and hold
Initial Use:
During the first use, you may see some smoke, which is normal. It will
dissipate soon.
Auto Shut Off Feature:
The iron has an auto shut off feature that activates after 2 minutes of
inactivity for safety purposes.
Auto shut off 
Auto shut On
How to Clean
FAQ:
Q: What should I do if I encounter excessive smoke during initial use?
A: Experiencing smoke during initial use is normal. Simply allow it to
dissipate by ventilating the area.
Q: How do I clean the steam vents of the iron?
A: To clean the steam vents, fill the iron with a vinegar-water solution and
run the steam function to remove any mineral deposits.