LED 00498.04 Bipolar Adapter Instructions
- July 19, 2024
- LED
Table of Contents
Via M.T. Cicerone, 138 03100 FROSINONE (FR)
ITALY www.led.it
REF 00498.04
Bipolar adapter
00498.04 Bipolar Adapter
WARNING
- Before use always do a functioning test; discard defect products.
IMPORTANT
The present bipolar adapter is compatible with equipments with the functions:
CUT–BLEND–FORCED COAG–SOFT COAGBIPOLAR.
In the case your equipment has the functions: AUTO–CUT–MIXED–COAG–MICRO,
before connecting the adapter it is necessary to remove (to unscrew) the small
plastic cylinder shown in the figure.
INSTRUCTIONS
- Turn on the unity and insert the adapter in the socket provided for the return plate connection, the alarm OC has to stop ringing.
- Insert one of the wire of the bipolar cable in adapter and the other wire in the black buckle provided for the active electrode.
IA00498-04R1
Via M.T. Cicerone, 138 03100 FROSINONE (FR)
ITALYwww.led.it
REF 00498.04
Bipolar adapter
WARNING
- Before use always do a functioning test; discard defect products.
IMPORTANT
The present bipolar adapter is compatible with equipments with the functions:
CUT–BLEND–FORCED COAG–SOFT COAG–BIPOLAR.
In the case your equipment has the functions: AUTO–CUT–MIXED–COAG–MICRO,
before connecting the adapter it is necessary to remove (to unscrew) the small
plastic cylinder shown in the figure.
INSTRUCTIONS
- Turn on the unity and insert the adapter in the socket provided for the return plate connection, the alarm OC has to stop ringing.
- Insert one of the wire of the bipolar cable in adapter and the other wire in the black buckle provided for the active electrode.
IA00498-04R1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>