LED SOLUTION ZAR60CM10W LED Tube Premium Instruction Manual
- May 15, 2024
- LED Solution
Table of Contents
LED SOLUTION ZAR60CM10W LED Tube Premium
Specifications
- Model: LED tube 60cm 10W 140lm/W Premium
- Product Codes: ZAR60CM10W, ZAR120CM18W-TB, ZAR120CM18W-DB, ZAR120CM18W-SB, ZAR150CM24W
- Input Voltage: 85 – 265V, 50 – 60Hz
- Power: 10W, 18W, 24W
- Color Temperature: 3000K, 5000K, 6000K
- Luminous Flux: 1400lm, 2520lm, 3360lm
- Angle: N/A
- Lifetime: Up to 50,000 hours
Product Usage Instructions
Installation
- Ensure the power source is switched off before installation.
- Remove the existing fluorescent tube carefully.
- Insert the LED tube into the fixture and twist to lock in place.
- Turn on the power and test the LED tube.
Maintenance
Regularly clean the LED tube with a soft, dry cloth to remove dust and
dirt. Do not use harsh chemicals or solvents for cleaning.
Safety Precautions
- Do not expose the LED tube to water or moisture.
- Avoid dropping or mishandling the LED tube.
- If the LED tube is damaged, do not use it and seek professional assistance.
Frequently Asked Questions (FAQ)
Q: What is the input voltage range for the LED tubes?
A: The input voltage range is 85 – 265V at a frequency of 50 – 60Hz.
Q: How long is the lifetime of the LED tubes?
A: The LED tubes have a lifetime of up to 50,000 hours.
Q: Can the LED tubes be used in damp environments?
A: No, it is not recommended to expose the LED tubes to water or
moisture.
Important safety information
Model
|
Product code
| Dimension L1
(mm)
| Dimension L2
(mm)
| Input voltage AC
(V) 50 – 60 Hz
| Power (W)| Color temperature (K)| Luminous flux (lm)|
Angle
| Lifetime (h)
---|---|---|---|---|---|---|---|---|---
LED tube 60cm 10W 140lm/W Premium| ZAR60CM10W| 588| 602| 85 – 265| 10| 5000|
1400| 180°| up to 50.000h
LED tube 120cm 18W 140lm/W Premium| ZAR120CM18W-TB| 1198| 1212| 85 – 265| 18|
3000| 2520| 180°| up to 50.000h
LED tube 120cm 18W 140lm/W Premium| ZAR120CM18W-DB| 1198| 1212| 85 – 265| 18|
5000| 2520| 180°| up to 50.000h
LED tube 120cm 18W 140lm/W Premium| ZAR120CM18W-SB| 1198| 1212| 85 – 265| 18|
6000| 2520| 180°| up to 50.000h
LED tube 150cm 24W 140lm/W Premium| ZAR150CM24W| 1498| 1512| 85 – 265| 24|
5000| 3360| 180°| up to 50.000h
- Please read this manual carefully before using the product and keep it for future reference.
- For damage caused by improper use or changes in the product structure, LED Solution s.r.o. bears no responsibility.
- Before handling the product in any way, make sure that the power supply is switched off.
- All activities performed on electrical equipment must only be performed by a person with electrical technical qualifications.
- Follow the wiring diagrams shown for safety.
- The product is not dimmable. The product is intended for connection with the G13 socket standard.
- The product is intended only for use in a dry environment or in a light fixture that protects against moisture. The product meets the IP20 protection class.
- Observe the voltage range of AC 85-265 V / 50-60 Hz. When the diffuser or lamp is damaged, disconnect it from the mains and do not use it.
- Moistened cotton is best for cleaning the product. Do not use solvents, thinners or alcohol for cleaning.
- Protect the product from solid and other particles settling on the lamp.
- The working temperature range is -20 to +40 °C, the average operating humidity is 75%
Replacement fluorescent tube
- Turn off the power supply.
- Replace them with the included LED starter and LED tube.
Connecting a separate LED
- Turn off the power supply.
- Connect the wires marked “L” and “N” POWER INPUT to the AC supply.
- Be sure to feed the tube from the right side, if you feed the light from the other side, there will be a short circuit, the jumper will burn and the light will be damaged !!!
- www.ledsolution.cz
- obchod@ledsolution.cz