FRIGIDAIRE A21785803 Counter Depth French Door Refrigerator User Guide

FRIGIDAIRE A21785803 Counter Depth French Door Refrigerator

Product Specifications

• Brand: Frigidaire
• Model Number: A21785803
• Country of Manufacture: USA
• Warranty: Limited Warranty – 1-800-374-4432 (USA), 1-800-265-8352 (Canada)

Product Usage Instructions

Installation

Before using the refrigerator, ensure proper installation by following these steps:

1. Check door handles are secure and tight.
2. Ensure the door seals completely to the cabinet on all sides.
3. Level the refrigerator side-to-side and slightly elevate the front for smooth door and drawer closing.
4. Ensure the refrigerator is setting solid on all corners.
5. Turn on the house power and plug in the refrigerator.
6. Connect the house water supply to the refrigerator (only use potable water).
7. Check for any water leaks at all connections and recheck after 24 hours.
8. Turn on the ice maker.
9. Remove shipping material, set fresh food and freezer
   temperatures, and send in the registration card.

Care and Cleaning

To maintain your refrigerator, follow these care and cleaning instructions:

1. Regularly clean the interior and exterior surfaces with a mild detergent and warm water.
2. Remove and clean the filter as per the manual’s guidelines.
3. Avoid using abrasive cleaners or sharp objects that may damage the surfaces.

Troubleshooting

If you encounter issues with your refrigerator, refer to the troubleshooting section in the manual for common problems and solutions. Contact customer support if needed.

Frequently Asked Questions

• Q: Where can I find additional resources for my Frigidaire refrigerator?
  • A: Additional resources, including FAQs, tips, videos, cleaning products, and accessories, are available at Frigidaire.com. You can also reach out to customer support through chat or phone for assistance.
• Q: How do I register my product?
  • A: To register your product, keep your model number, serial number, purchase date, and installation checklist handy. Visit the manufacturer’s website or contact customer support for guidance on the registration process.

Frigidaire.com USA 1-800-374-4432

A21785803 (March 2024) Frigidaire.ca Canada 1-800-265-8352

2

INTRODUCTION

Welcome to our family
Thank you for bringing Frigidaire into your home! We see your purchase as the beginning of a long relationship together.
This manual is your resource for the use and care of your product. Please read it before using your appliance. Keep it handy for quick reference. If something doesn’t seem right, the troubleshooting section will help you with common issues.
FAQs, helpful tips and videos, cleaning products, and kitchen and home accessories are available at Frigidaire.com.
We are here for you! Visit our website, chat with an agent, or call us if you need help. We may be able to help you avoid a service visit. If you do need service, we can get that started for you.
Let’s make it official! Be sure to register your product.
Keep your product info here so it’s easy to find.
Model Number
Serial Number
Purchase Date

Installation Checklist
Doors
Handles are secure and tight Door seals completely to cabinet on
all sides
Leveling
Refrigerator is level side-to-side and slightly elevated in front to assist with door and drawer closing (front should be higher than back)
Cabinet is setting solid on all corners
Electrical Power
House power turned on Refrigerator plugged in
Ice Maker
House water supply connected to refrigerator (Warning: Potable water supply only.)
No water leaks present at all connections – recheck in 24 hours
Ice maker is turned ON
Final Checks
Shipping material removed Fresh food and freezer
temperatures set Registration card sent in

Serial Number Location

IMPORTANT SAFETY INFORMATION

3

WARNING
Please read all instructions before using this appliance.
Safety Definitions
This is the safety alert symbol. It is used to alert of potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

DANGER
DANGER Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical devices to defrost refrigerator. Do not puncture refrigerant tubing.
DANGER Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. Use only manufacturer-authorized service parts. Any repair equipment used must be designed for flammable refrigerants. Follow all manufacturer repair instructions. Do not puncture refrigerant tubing.
CAUTION

WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
IMPORTANT
IMPORTANT indicates installation, operation or maintenance information which is important but not hazard-related.

CAUTION Risk of fire or explosion. Dispose of refrigerator properly in accordance with the applicable federal or local regulations. Flammable refrigerant used.
CAUTION Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions carefully. Flammable refrigerant used.
WARNING
CALIFORNIA RESIDENTS ONLY Cancer and Reproductive Harm
www.P65Warnings.ca.gov

4

IMPORTANT SAFETY INFORMATION

Child Safety

Proper Disposal of your Appliance

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the refrigerator is unpacked. Children should NEVER use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.
Safety Instructions
· DO NOT store or use gasoline, or other flammable liquid within or in the vicinity of this appliance. Read Product Label for warnings regarding flammability and other hazards.

Risk of child entrapment
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous ­ even if they will sit for “just a few days”. If you are getting rid of your old appliance, please follow the instructions below to help prevent accidents.
We strongly encourage responsible appliance recycling/disposal methods. Check with your utility company or visit energystar.gov/products/recycle for more information on recycling your old appliance.
Before you throw away your old appliance:
· Remove door.
· Leave shelves in place so children may not easily climb inside.

· DO NOT store explosive substances such as aerosol cans with a flammable propellant in this appliance.

· Have refrigerant removed by a qualified service technician.

· DO NOT operate the refrigerator in the presence of explosive fumes.

IMPORTANT

· Avoid contact with any moving parts of automatic ice maker.

CFC/HCFC Disposal Your old appliance may have a cooling

· Remove all staples from the carton.

system that used CFCs or HCFCs (chlo-

Staples can cause severe cuts, and also rofluorocarbons or hydrochlorofluoro-

destroy finishes if they come in contact carbons). CFCs and HCFCs are believed

with other appliances or furniture.

to harm stratospheric ozone if released

to the atmosphere. Other refrigerants

WARNING

may also cause harm to the environment if released to the atmosphere.

Do not use electrical appliances inside the food storage compartments of the appliance unless they are of the type recommended by the manufacturer.

If you are throwing away your old appliance, make sure the refrigerant is removed for proper disposal by a qualified technician. If you intentionally release refrigerant, you may be subject to fines and imprisonment under provisions of environmental legislation.

IMPORTANT SAFETY INFORMATION

5

WARNING
These guidelines must be followed to ensure that safety mechanisms in this appliance will operate properly.
Electrical information
· Plug the appliance into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical outlet. The power cord of the appliance is equipped with a 3-prong grounding plug for your protection against electrical shock hazards. Plug it directly into a properly grounded 3-prong receptacle. Install the receptacle in accordance with local codes and ordinances. Consult a qualified electrician. Avoid connecting the appliance to a Ground Fault Interrupter (GFI) circuit. Do not use an extension cord or adapter plug.
· If the power cord is damaged, an authorized service technician should replace it to prevent any risk.
· Never unplug the appliance by pulling on the power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord.
· Unplug the appliance before cleaning to avoid electrical shock.
· Performance may be affected if the voltage varies by 10% or more. Operating the appliance with insufficient power can damage the compressor. Such damage is not covered under your warranty.
· Do not plug the unit into an electrical outlet controlled by a wall switch or pull cord to prevent the appliance from being turned off accidentally.

IMPORTANT
To turn off power to your appliance you must unplug the power cord from the electrical outlet.
Grounding type wall receptacle
Do not, under any circumstances, cut, remove, or bypass the grounding prong.
Power cord with 3-prong grounded plug

6

FEATURES

*Features may vary according to model

G

H

F

I

J

E

E

J

D

K

D

C

B

L

M

N

A

A

A Anti-Tip Legs B Ice Maker C Adjustable Hinges D Door Bins E Adjustable Door Bins F Flipper Mullion G Water Filter

H Flipper Guide I Air Filter J Spillsafe® Shelves K CrispSealTM Drawers L Freezer Drawer M Middle Freezer Drawer N Freezer Basket

IMPORTANT
Accessories are available for your appliance and may be purchased at Frigidaire.com or by calling 1-800-374-4432 (Frigidaire.ca or 1-800-265-8352 in Canada) or from an authorized seller.

INSTALLATION

7

Tools Necessary:

(OR)

AND

AND

OR

OR

Phillips Head or
Quadrex Head Screwdriver

6mm

8mm Socket Adjustable ” Fixed

Allen Wrench Wrench

Wrench Wrench

This Use & Care Manual provides general installation and operating instructions for this model. We recommend using a service or kitchen contracting professional to install the refrigerator. Use the appliance only as instructed in this Use & Care Manual. Before starting the appliance, follow these important first steps.
Location

CAUTION
Do Not install the appliance where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the appliance.

· Choose a place that is near a grounded, non-GFCI, electrical outlet. Do Not use an extension cord or an adapter plug.

WARNING Installation

· If possible, place the appliance out of direct sunlight and away from the range, dishwasher, or other heat sources.

Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical

· The appliance must be installed on a connections:

floor that is level and strong enough to support a fully loaded appliance.
· Consider water supply availability for

Sides & Top inch (9.5 mm)

Back

1 inch (25.4 mm)

models equipped with an automatic ice maker.

NOTE

WARNING
This appliance is intended for use in residential household and similar interior applications such as: · Kitchen / Kitchenette · Pantry Room · Basement · Enclosed Garage · Other interior residential
type environments

If your appliance is placed with the door hinge side against a wall, you may have to allow additional space for the handle so the door can be opened wider.
Door opening
The appliance should be positioned to allow easy access to a counter when removing food. For best use of refrigerator drawers and freezer baskets, the appliance should be in a position where both can be fully opened.

8

INSTALLATION

Cabinet Leveling & Door Alignment (if necessary)
Guidelines for final positioning of appliance: · All 4 corners of the cabinet must rest
firmly on the floor. · The front should be slightly
elevated to ensure that doors close and seal properly.

Flipper Mullion
Adjust Flipper Mullion for proper connection with the mullion guide by ensuring the flipper mullion is folded and perpendicular to the fresh food door. If the mullion guide is not in the correct position, it could prevent the door from closing completely.

· Doors should align with each other and be level.

Most of these conditions can be met by raising or lowering the adjustable anti-tip legs.

To level the cabinet using the anti-tip legs: 1. Slightly open freezer drawer.

WRONG

2. Lower anti-tip legs until they are both touching the floor. Use a pair of pliers to adjust.

To raise unit: turn leg clockwise.

To lower unit: turn leg counterclockwise.

3. Ensure both doors are bind-free with their seals touching the cabinet on all four sides and the cabinet is stable.

DOOR REMOVAL

9

Getting through narrow spaces
If refrigerator will not fit through an entrance area, doors can be removed. Check first by measuring the entrance.
To prepare for removing the doors:
1. Make sure the electrical power cord is unplugged from the wall outlet.
2. Remove any food from the door shelves and close the doors.
To remove the refrigerator doors:
1. Open doors to 90°.

CAUTION
Be sure doors are set aside in a secure position where they cannot fall and cause personal injury, or damage to the doors or handles.
4. Remove three 8 mm bolts from both top hinges. Lift doors up off lower hinges and carefully set aside..

2. Trace lightly around the door’s top hinges with a pencil. This makes reinstallation easier.
3. Disconnect electrical harness running from door to hinge cover.

5. To gain access to lower hinge, drawer will need to be extended. Unscrew the 3 lower hinge screws and slide the hinge inward.

Lower Hinge Removal
6. To reinstall doors, reverse procedure.
Once both doors are in place, ensure they are aligned with each other and level (See INSTALLATION for more details), and replace the top hinge cover.

10 DOOR REMOVAL

Removing Freezer Drawer
CAUTION
Drawer is heavy. Use caution when lifting.
1. Open drawer and fully extend. 2. Remove the freezer drawer. 3. Remove the freezer basket. 4. Inside the cabinet, press the 2 tabs
on both sides to release the sliders. 5. Remove the drawer with brackets
and sliders.

Reinstalling Freezer Drawer
1. Place drawer with brackets and sliders inside the cabinet and click into place.
2. Replace the basket.
NOTE
For additional instructions, see STORAGE FEATURES.

11 DOOR HANDLE INSTALLATION

CAUTION

Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.

Door Handle Mounting Instructions

Mounting Refrigerator Handles

1. Remove handles from carton and any other protective packaging.

2. Position fresh food handle end caps over upper and lower preinstalled shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing toward the opposite door.

3. While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen wrench.

4. Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing toward the first door.

Mounting Freezer Drawer Handle

5. Position freezer drawer handle end caps over left and right pre-installed shoulder bolts (A) that are fastened to the door, ensuring the holes for the set screws are facing down.

6. While holding handle

firmly against door,

loosely tighten right

Allen set screw (B)

with supplied Allen

wrench until there is

no gap between handle
and door. 7. Still holding the handle

NOTE

firmly to the door, firmly When tightening the Allen set screws, it is imper-

tighten left Allen set

ative to apply force to the longer arm of the Allen

screw (B) with supplied wrench supplied in the handle packaging.

Allen wrench.

8. Return to the right Allen set screw (B) and firmly tighten with supplied

NOTE

Allen wrench.

Tighten all set screws so the screw is below the surface

of the handle. Draw the handles tight to doors/drawer

with no gaps. Opening the opposite door while tight-

ening the Allen screw makes installation easier.

The door handle may loosen over time or if it was installed improperly. If this happens, tighten the set screws on the handles.

WATER SUPPLY CONNECTION

WARNING
To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.
CAUTION
To Avoid Property Damage:
· Use Copper or Stainless Steel braided tubing for the water supply line. Do not use water supply tubing made of ¼ in. plastic. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if you use plastic tubing for the supply line.
· DO NOT install water supply tubing in areas where temperatures fall below freezing.
· Chemicals from a malfunctioning water softener can damage the ice maker. If you use a water softening system, ensure the softener is maintained and working properly.

· A shutoff valve to connect the water supply line to the household water system. DO NOT use a self-piercing type shutoff valve.
· Do not reuse compression fitting or use thread seal tape.
· A compression nut and ferrule (sleeve) for connecting a copper water supply line to the ice maker inlet valve.
NOTE
Check with local building authority for recommendations on water lines and associated materials prior to installing refrigerator. Depending on local/state building codes, Frigidaire recommends you use Smart Choice® water line kit 5304437642 with a 6 ft. (1.8 m.) Stainless Steel Water Line on homes with existing valves. Please refer to Frigidaire.com for more information.

IMPORTANT
Ensure the water supply line connections comply with all local plumbing codes.
To install the water supply line, the following are needed:
· Basic Tools: adjustable wrench, flathead screwdriver, and PhillipsTM screwdriver
· Access to a household cold water line with water pressure between 30 and 100 psi.
· A water supply line made of ¼ in. (6.4 mm) OD, copper or stainless steel tubing. To determine the length of tubing needed, measure the distance from the ice maker inlet valve at the back of the refrigerator to the cold water pipe. Then add approximately 6 ft. (1.8 m.), so you can move the refrigerator out for cleaning.

13 WATER SUPPLY CONNECTION

Connection to Household Water Supply with 1/4″ compression fitting Water inlet fitting

Plastic tubing
to water valve
Plastic Cap

6 ft. (1.8 Meters) Stainless Steel water line from household water supply line
Remove plastic cap from water inlet fitting Water Inlet Brass Fitting
¼ inch plastic tube to water valve

To Connect Water Tube to Household Water Supply

1. Disconnect refrigerator from electrical power source.

2. Place end of water

supply line into sink or bucket. Turn ON water

To household
water supply

supply and flush supply line until water is clear. Turn

To unit water valve

OFF water supply at shutoff valve.

3. Open the locking clips and grab water line coming from the refrigerator. Remove plastic cap from water inlet fitting and discard cap.

4. If using (recommended) stainless steel braided tubing – the nut and ferrule are already assembled on the tubing. Slide compression nut onto water inlet fitting and finger tighten.
5. Using two ½” wrenches (one to hold the household water line nut and the other to hold the water inlet fitting nut), tighten a half turn with wrench. DO NOT overtighten.
Place ½” wrench here. Turn clockwise.
Place ½” wrench here. Do not turn.
6. Replace the connected tubes into the clips and lock clips back in place to keep the tubing in the right position.
7. Turn ON water supply at shutoff valve and tighten any connections that leak.
8. Reconnect refrigerator to electrical power source.
9. Ensure ice maker is turned ON. 10. Purge air from Ice and Water Dispenser
System by operating the water dispenser for 3-4 minutes. This will require dispensing several glasses of water.

CONTROLS AND SETTINGS

1 2
9

3

4

5

6 7
8

1 Temperature Control Choose the compartment by pressing to change the temperature in that compartment. Adjust the temperature with the — /+ keys.

4 Prior to grocery shopping, we recommend you activate Freeze Boost to freeze your food faster It will remain active for up to 24 hours before automatically deactivating or you manually exit. Press Freeze Boost to turn the function off. This will reset the freezer to the previous temperature setting.
5 Reset Water Filter will illuminate when it is time to replace the water filter. See the FILTER REPLACEMENT section for instructions on how to replace the water filter. After changing the water filter, reset the alert by pressing and holding Reset Water Filter for 3 seconds.
6 Air Filter automatically lights up when the it’s time to change the air filter, typically after 6 months.
7 Water Filter automatically lights up when the it’s time to change the water filter, typically after 6 months.
8 Ice Maker Press and hold for 3 seconds to turn the ice maker on/ off. When the indicator is lit, the ice maker is on. When the indicator is not lit, the ice maker is OFF and will stop making ice. While off, ice dispensing can continue as long as there is ice in the bucket. When ice maker is off and ice is dispensing, the indicator will blink.
9 °F/°C toggles the temperature mode between Fahrenheit and Celsius. Press and hold Freeze Boost and + for 5 seconds. A tone will confirm the change.

Refrigerator Compartment

Freezer Compartment

2 Control Lock Press to lock the appliance control display. When locked, other key functions are disabled. This prevents accidentally changing settings when cleaning. Lock the internal appliance control display for child safety and cleaning.

3 Reset Air Filter will illuminate when it is time to replace the air filter. See the FILTER REPLACEMENT section for instructions on how to replace the air filter. After changing the air filter, reset the alert by pressing and holding Reset Air Filter for 3 seconds.

Fahrenheit

Celsius

15 CONTROLS AND SETTINGS

NOTE
The recommended settings for a product installed in a kitchen is 37°F for the fresh food compartment and 0°F for the freezer.
IMPORTANT
If food is freezing in the fresh food compartment, increase the temperature setting 1 or 2 degrees.
IMPORTANT

Alarms
High Temperature
If the temperature increases, the HIGH TEMP alarm will sound every 10 seconds until you press any key to mute it. The display will blink HI in the corresponding compartment until the temperature reaches an acceptable level.
Door Alarm
When and door is left open for 5 minutes, an alarm will sound. The alarm is turned off by closing the door.

Food placed within 1 in. in front of the air ports may cause food to freeze.

NOTE
Unit should stabilize temperatures within 24 hours of installation.

16 CONTROLS AND SETTINGS

Sabbath Mode

The Sabbath Mode is a feature that disables portions of the refrigerator and its controls in accordance with observance of the weekly Sabbath and religious holidays within the Orthodox Jewish community.

In the Sabbath Mode, the High Temp alarm is active for health reasons. For example, if the door is left ajar the High Temp alarm is activated. The refrigerator will function normally once the door is closed, without any violation of the Sabbath/Holidays. The High Temp alarm is permitted when cabinet temperature is outside the safe zone for 20 minutes. The alarm silences itself after 10 minutes while the High Temp icon stays lit until the Sabbath mode is exited.

To activate Sabbath Mode, press and hold — and Reset Air Filter simultaneously for 5 seconds. Sb will display, and no audible sounds will occur until you exit Sabbath Mode.

Sabbath Mode activated

To exit Sabbath Mode, press and hold — and Reset Air Filter simultaneously for 5 seconds. An audible tone will sound, and the refrigerator will go back to the state it was in prior to activating Sabbath Mode.

For further assistance, guidelines for proper usage and a complete list of models with the Sabbath feature, please visit the web at star-k.org.

NOTE
While in Sabbath Mode, neither the lights nor the appliance control display will work until Sabbath Mode is deactivated.
The refrigerator stays in Sabbath Mode after power failure recovery. Deactivated it with the buttons on the appliance control display.

Sabbath Mode deactivated
NOTE
Although the Sabbath Mode has been initiated, the ice maker will complete the cycle it had already started. The ice cube compartment will remain cold and new ice cubes can be made with standard trays.

ICE MAKER

IMPORTANT
On occasion, unusually small ice cubes may be noticed in the bucket. This could occur in normal operation of the ice maker. If happening frequently, it may be an indication of low water pressure or the water filter needs to be replaced. As the water filter nears the end of its useful life and becomes clogged with particles, less water is delivered to the ice maker during each cycle. Remember, if it’s been six months or longer since last changing the water filter, replace it with a new one. Poor quality household water may require the filter to be changed more frequently.
CAUTION
If the water supply to the refrigerator is softened, be sure the softener is properly maintained. Chemicals from a water softener can damage the ice maker.

Cleaning the ice maker
Clean the ice maker and ice bin at regular intervals, especially prior to vacation or moving.
1. Turn off the ice maker.
2. Remove the ice bin by lifting upward and pulling straight out.
3. Empty and carefully clean the ice bin with mild detergent. Do not use harsh or abrasive cleaners. Do not place in dishwasher. Rinse with clear water.
4. Allow the ice bin to dry completely before replacing in the freezer.
5. Replace the ice bin. Turn the ice maker on.
Remove and empty the ice bin if:
An extended power failure (one hour or longer) causes ice cubes in the ice bin to melt and refreeze together after power is restored.

Ice maker tips
· If refrigerator is not connected to a water supply or the water supply is turned off, turn off the ice maker as described in the previous section.
· The following sounds are normal when the ice maker is operating:
– Motor running
– Ice dropping into ice bin
– Water valve opening or closing
– Running water
· If a large quantity of ice is needed at one time, it is best to get cubes directly from the ice bin.
· Ice cubes stored too long may develop an odd flavor. Empty the ice bin as explained in “Cleaning the ice maker”.
· It is normal to have a small quantity of little pieces along with the whole cubes.
· It is normal for ice to fill to the top of the ice bin.

Removing Ice Bin
Remove the ice bin by (1) lifting upward and (2) pulling straight out, then shake to loosen the cubes or clean as explained above.
CAUTION
NEVER use an ice pick or similar sharp instrument to break up the ice. This could damage the ice bin. To loosen stuck ice, use warm water. Before replacing the ice bin, make sure it is completely dry.

STORAGE FEATURES

CAUTION
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. Allow the glass shelves to stabilize to room temperature before cleaning. Do not wash in dishwasher.

CrispSeal Drawer
The refrigerator includes a crisper designed for storing fruits, vegetables, and other fresh produce.

Shelf positions can easily be adjusted in the fresh food compartments as needed. The shelves have mounting brackets that attach to slotted supports at the rear of each compartment.

Change the Position of a Shelf
1. Remove all food from shelf.
2. Lift the front edge up and pull the shelf out.
3. Replace by inserting the mounting bracket hooks into the desired support slots.
4. Lower the shelf and lock into position.

To remove the CrispSeal drawer for cleaning:
1. Pull the drawer out until it stops.
2. Lift the front slightly and remove the drawer.

Removing CrispSeal Drawer

19 STORAGE FEATURES

Doors

Freezer Features

Storage bins

The doors to the fresh food compartment use a system of modular storage bins. All of these bins are removable for easy cleaning. Adjust bins as needed.

Door bins are ideal for storing jars, bottles, cans, and large drink containers. They also enable quick selection of frequently used items.

Adjustable door bins

Adjustable door bins can be moved to suit individual needs.

To move door bin side-to-side:

1. Tilt bin up so the back of the bin is off the door but the hook is still engaged.
2. Slide bin along rail to desired position.
3. Lower bin back into place.
To move door bin up or down:

Freezer Drawer
To remove upper freezer drawer: 1. Open freezer compartment completely. 2. Lift up and out to remove upper freezer drawer.

1. Lift bin up disengaging the hook.

Reverse the steps to reinstall drawer.

2. Move bin to desired rail location.
3. Push bin hook into rail engaging the hook.

IMPORTANT
There are wheels on the bottom of the drawer. Make sure all wheels are aligned on their respective tracks for proper function. If drawer is not aligned properly, it will cause problems with the door operation.

NOTE
If basket is not resting on stabilizer bar retainer clips, the drawer will not close properly.
To remove freezer basket: 1. Open freezer compartment completely. 2. Lift the basket up and remove.
Reverse the steps to reinstall freezer basket.

Adjustable Door Bins

20 STORING FOOD AND SAVING ENERGY

Ideas for storing foods
Fresh food storage
· Keep the fresh food compartment between 34°F and 44°F with an optimum temperature of 37°F.
· Avoid overcrowding the refrigerator shelves, which reduces air circulation and causes uneven cooling.
· Avoid placing food in front of air ports. (See CONTROLS AND SETTINGS for illustration.)
Fruits and vegetables

· Activating Freeze Boost will help the freezer more efficiently maintain the selected temperature after placing new purchases with pre-existing frozen foods.
· Avoid adding too much warm food to the freezer at one time. This overloads the freezer, slows the rate of freezing, and can raise the temperature of frozen foods.
· Leave a space between packages, so cold air can circulate freely, allowing food to freeze as quickly as possible.

· Store fruits and vegetables in crisper drawers, where trapped moisture helps preserve food quality for longer time periods.
· Do not wash items until ready to use. Remove excess water before placing inside unit.
· Wrap any items that have strong odors or high moisture content.
Meat
Wrap raw meat and poultry separately and securely to prevent leaks and contamination of other foods or surfaces.
Frozen food storage
· Keep the freezer compartment at 0°F or lower.
· A freezer operates most efficiently when it is at least full.
Packaging foods for freezing
· To minimize food dehydration and quality deterioration, use aluminum foil, freezer wrap, freezer bags, or airtight containers. Force as much air out of the packages as possible and seal them tightly. Trapped air can cause food to dry out, change color, and develop an off-flavor (freezer burn).

Ideas for saving energy
Installation
· Locate the refrigerator in the coolest part of the room, out of direct sunlight, and away from heating ducts or registers.
· Do not place the refrigerator next to heat-producing appliances such as a range, oven, or dishwasher. If this is not possible, a section of cabinetry or an added layer of insulation between the two appliances will help the refrigerator operate more efficiently.
· Level the refrigerator so that the doors close tightly.
Temperature settings
Refer to the CONTROLS AND SETTINGS for procedures on temperature settings.
Food storage
· Avoid overcrowding the refrigerator or blocking cold air vents. Doing so causes the refrigerator to run longer and use more energy.
· Cover foods and wipe containers dry before placing them in the refrigerator. This cuts down on moisture build-up inside the unit.

· Wrap fresh meats and poultry with suitable freezer wrap prior to freezing.
· Do not refreeze meat that has completely thawed.
Loading the freezer
· Prior to grocery shopping, we recommend you activate Freeze Boost to freeze your food faster It will remain active for up to 24 hours

· Organize the refrigerator to reduce door openings. Remove as many items as needed at one time and close the door as soon as possible.
· Do not place a hot container directly on a cold shelf. Remember, such an extreme temperature change may damage the glass.

NORMAL OPERATING SOUNDS

Understanding the sounds coming from the refrigerator

High-efficiency refrigerators may introduce unfamiliar sounds. These sounds normally indicate the refrigerator is operating correctly. Some surfaces on floors, walls, and kitchen cabinets may make these sounds more noticeable.

The following is a list of major components in the refrigerator and the sounds they can cause:

A

Evaporator Refrigerant through

the evaporator may create a

boiling or gurgling sound.

B

Evaporator fan Sounds of air

being forced through the

refrigerator by the evaporator

fan may be heard.

C

Defrost heaters During defrost

cycles, water dripping onto the

defrost heaters may cause a

hissing or sizzling sound. After

defrosting, a popping sound

may occur.

D

Automatic ice maker When

ice has been produced, sounds

of ice cubes falling into the

ice bin may be heard. The ice

maker fan, water valve

activation, and refrigerant

gas fluid may create sounds

from its operation.

E

Electronic control & automatic

defrost control These parts can

produce a snapping or clicking

sound when turning the cooling

system on and off.

F

Compressor Modern, high-

efficiency compressors run much

faster than older models. The

compressor may have a high-

pitched hum or pulsating sound.

G

Water valves Make a buzzing

sound each time they open to fill

the ice maker.

H

Drain pan (not removable)

Sounds of water dripping into

the drain pan during the defrost

cycle may be heard.

I

Condenser May create minimal

sounds from forced air.

J

Motorized damper May produce

a light humming during operation.

NOTE
Energy efficient foam in the refrigerator is not a sound insulator.

NOTE
During automatic defrost cycle, a red glow in the back wall vents of the freezer compartment is normal.

B

E

DJ

A

C

G

F

I H

Features vary by model

22 FILTER REPLACEMENT

PureSource Ultra IITM Water Filter
Ordering your replacement water filter
If you have not used your refrigerator for a period of time (during moving for example), change the filter before reinstalling the refrigerator. Order replacement filters online at Frigidaire.com, by calling 1 800-374-4432 or through the dealer from which the refrigerator was purchased. We recommend replacing filters at least once every 6 months.
Here is the product number to request when ordering:
PureSource Ultra IITM Water Filter EPTWFU01
NOTE
When you order your replacement filter, please reorder the same filter type currently in your refrigerator.
*Find the Performance Data Sheet located in the Guides and Manuals section for your specific water filter on Frigidaire.com.

More about the advanced water filter
Certified by IAPMO R&T against NSF/ANSI Standards 42, 53, 401, and CSA B483.1 in PureSource Ultra II systems for reduction of the claims on the Performance Data Sheet*. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts. Test & certification results: · Rated Capacity – 125 gal/473 L for
PureSource Ultra II ice and water filter · Rated service flow – .65 gal/min · Operating Temp: Min. 33°F, Max. 100°F · Maximum Rated Pressure – 100 lbs/in.² · Recommended Minimum Operating
Pressure: 30 lbs/in²

23 FILTER REPLACEMENT

Replacing your water filter
The refrigerator is equipped with a water filtering system. The water filtering system filters water used to produce ice. The water filter is located at the top left side of the fresh food compartment.
Change the water filter every 6 months to ensure the highest possible water quality. Replace Water Filter on the display indicates when to replace the filter after a standard amount of water (125 gallons/473 liters for PureSource Ultra II) has flowed through the system.
It is not necessary to turn the water supply off to change the filter. Be ready to wipe up any small amounts of water released during the filter replacement. (Instructional video of procedure can be found on Frigidaire.com.)
1. Turn off Ice Maker on the appliance control display.
2. Remove the old filter by rotating it counterclockwise (to the left) 90 degrees to release it.
3. Slide the old filter cartridge straight out of the housing and discard it.
4. Unpackage the new filter cartridge. Slide it into the filter housing as far as it will go with the grip end horizontal.
5. Push lightly inward on the filter while rotating it clockwise (to the right). The filter will then pull itself inward as it is rotated. Rotate the filter 90 degrees until it stops and the grip end is vertical. A very light click may be heard as the filter locks into place.
6. Press and hold the Reset Water Filter button on the appliance control display for 3 seconds. When the indicator is no longer illuminated, the water filter status has been reset.
7. Turn on Ice Maker on the appliance control display.
8. In order for the ice maker to work properly, clear air from the water filter tubing by filling the ice bucket completely twice. Discard the ice produced.

PureAir Ultra IITM Air Filter
To ensure optimal filtering of refrigerator odors, change the air filter every 6 months. (Replace Air Filter on the appliance control display indicates replacing the filter after 6 months). Ordering your replacement air filter To order replacement filters, please visit our online store at Frigidaire.com, by calling toll-free at 1 800-372-4432, or by visiting the dealer where you purchased your unit. We recommend replacing filters at least once every 6 months. Here is the product number to request when ordering:
PureAir Ultra IITM Air Filter PAULTRA2 Replacing your air filter The air filter is located in the top center of the fresh food compartment.
1. Remove the air filter cover by squeezing the top and bottom of the cover together and removing from liner.
2. Remove the old filter and discard it. 3. Unpack the new filter and snap it
into the filter cover. The open face (carbon media) of the filter should be installed facing outward in the cover. 4. Replace the air filter cover by squeezing the sides and snapping it back into place. 5. Press and hold the Reset Air Filter button on the Display for 3 seconds. When the indicator turns off, the status has been reset.

CARE AND CLEANING

Care & Cleaning Tips
Keeping the refrigerator clean maintains its appearance and prevents odor build-up. Wipe up any spills immediately and clean the freezer and fresh food compartments at least twice a year.
NOTE
Do not use abrasive cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches, or cleansers containing petroleum products on plastic parts, interior doors, gaskets, or cabinet liners. Do not use scouring pads or other abrasive cleaning materials.
· Never use metallic scouring pads, brushes, abrasive cleaners, or strong alkaline solutions on any surface.
· Never use CHLORIDE or cleaners with bleach to clean stainless steel. · Do not wash any removable parts in a dishwasher.
NOTE
When setting temperature controls to turn off cooling, power to lights and other electrical components will continue until the power cord is unplugged from the wall outlet.
· Always unplug the electrical power cord from the wall outlet before cleaning. · Remove adhesive labels by hand. Do not use razor blades or other sharp
instruments which can scratch the appliance surface. · Do not remove the serial plate. Removal of the serial plate voids the warranty. · Before moving refrigerator, raise the anti-tip brackets so the rollers will work
correctly. This will prevent the floor from being damaged. Refer to the guide on the next page for details on caring and cleaning specific areas of refrigerator.
CAUTION
· Pull the refrigerator straight out to move it. Shifting it from side to side may damage flooring. Be careful not to move the refrigerator beyond the plumbing connections.
· Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
IMPORTANT
When storing or moving refrigerator in freezing temperatures, be sure to completely drain the water supply system. Failure to do so could result in water leaks when the refrigerator is put back into service. Contact a service representative to perform this operation.

25 CARE AND CLEANING

Vacation and moving tips

Occasion Tips

Short

· Leave the refrigerator operating during vacations of 3 weeks or less.

Vacations · Use all perishable items from refrigerator compartment.

· Turn the automatic ice maker off and empty the ice bucket, even if

only away a few days.

Long

· Remove all food and ice if leaving for 1 month or more.

Vacations · Turn the cooling system off (see “Controls” section for location of On/

Off button) and disconnect power cord.

· Turn the water supply valve to the closed position.

· Clean the interior thoroughly.

· Leave both doors open to prevent odors and mold build-up. Block the doors open if necessary.

Moving · Unplug the unit.

· Remove all food and ice.

· We reommend If using a handcart, load from the side.

· Adjust rollers all the way up to protect them during sliding or moving.

· Pad the cabinet to avoid scratching the surface.

Part
Interior & Door Liners
Door Gaskets Drawers & Bins Glass Shelves
Exterior & Handles

Care & Cleaning Tips

What To Use

Tips and Precautions

· Soap and water
· Baking soda and water

Use two tablespoons of baking soda in one quart of warm water. Be sure to wring excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical part.

· Soap and water

Wipe gaskets with a clean soft cloth.

· Soap and water

Use a soft cloth to clean drawer runners and tracks.

· Soap and water · Glass cleaner

Allow glass to warm to room temperature before immersing in warm water.

· Mild liquid sprays

· Soap and water
· Non Abrasive Glass Cleaner

Do not use commercial household cleaners containing ammonia, bleach or alcohol to clean handles. Use a soft cloth to clean smooth handles or exterior. DO NOT use a dry cloth to clean smooth doors.

TROUBLESHOOTING

Let us help you troubleshoot your concern! This section will help you with common issues. If you need us, visit our website, chat with an agent, or call us. We may be able to help you avoid a service visit. If you do need service, we can get that started for you!

1-800-374-4432 (United States) Frigidaire.com

1-800-265-8352 (Canada) Frigidaire.ca

Concern Potential Cause

Common Solution

Automatic Ice Maker

Ice maker is · Ice maker is turned off. · Turn on ice maker on the appliance

not making

control display.

any ice.

· Refrigerator is not

· Connect the unit to the household

connected to water line or

water supply and ensure the water

water valve is not open.

valve is open.

· The water supply line is kinked.

· Ensure that the supply line does not kink when the refrigerator is pushed into place against the wall.

· The water filter is not seated properly.

· Remove and reinstall the water filter. Be sure to seat it fully into the locked position.

Ice maker is · Ice maker is producing

not making

less ice than expected.

enough ice.

· The ice maker will produce approximately 2 to 2.5 pounds of ice every 24 hours depending on usage conditions.

· The water supply line is kinked.

· Ensure that the supply line does not kink when the refrigerator is pushed into place against the wall.

· Water pressure is

· Have someone turn up the cut-off

extremely low. Cut-off and

and cut-on pressure on the water

cut-on pressures are too

pump system (well systems only).

low (well systems only).

· Reverse osmosis system · It is normal for a reverse osmosis

is in regenerative phase.

system to be below 20 psi during

the regenerative phase.

Ice cubes

· Ice cubes are not being · Remove ice container and discard

are freezing

used frequently enough

ice. The ice maker will produce

together.

or interruption of power

fresh supply. Ice should be used

for prolonged time.

at least twice weekly to keep the

cubes separated.

· Ice cubes are hollow

· This generally occurs when the

(shells of ice with water

ice maker does not get enough

inside). The hollow cubes

water. This is usually the result of

break open in the bin

a clogged water filter or restricted

and leak their water onto

water supply. Replace the water

existing ice, which causes

filter and if the condition still occurs,

it to freeze together.

check to see if the water valve is not

turned on all the way or if there is a

kinked water supply line.

27 TROUBLESHOOTING

Concern Potential Cause

Common Solution

Opening/Closing Of Doors/Drawers

Door(s) will · Door was closed too

· Close both doors gently.

not close.

hard, causing other door

to open slightly.

· Refrigerator is not level. It rocks on the floor when moved slightly.

· Ensure floor is level and solid, and can adequately support the refrigerator. Contact a carpenter to correct a sagging or sloping floor.

· Refrigerator is touching a wall or cabinet.

· Ensure floor is level and solid, and can adequately support the refrigerator. Contact a carpenter to correct a sagging or sloping floor.

· Food/packaging is obstructing the door from closing.

· Make sure there is no food/ packaging blocking the doorway.

· Flipper mullion on left fresh food door is not in the correct position.

· Ensure the flipper mullion is in the correct position to allow the door to close. (See “Flipper Mullion” in INSTALLATION.)

Drawers are · Food is touching shelf

difficult to

on top of drawer.

move.

· Track that drawers slide

on is dirty.

· Remove top layer of items in drawer. · Ensure drawer is properly installed
on track.

· Clean drawer, rollers, and track. See CARE & CLEANING.

Running of Refrigerator

Compressor · Refrigerator is in

does not run.

defrost cycle.

· This is normal for a fully automatic defrost refrigerator. The defrost cycle occurs periodically, lasting about 30 minutes.

· Plug at electrical outlet · Ensure plug is tightly pushed

is disconnected.

into outlet.

· House fuse blown or tripped circuit breaker.

· Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker.

· Power outage.

· Check house lights. Call local electric company.

Refrigerator · The variable speed

seems to

compressor is designed

run too

to run 100% of the

much or

time except during the

too long.

defrost cycle. At times

it will run faster, such as

after a defrost cycle.

· It is normal for the compressor to run continuously except during defrost mode.

Digital Temperature Setting Display

Digital

·

temperature

displays an

error.

Electronic control system has detected a performance problem.

· Contact Electrolux Customer Care for assistance with any errors or codes flashing in the display by calling 1-800-374-4432.

28

TROUBLESHOOTING

Concern Potential Cause

Common Solution

Water/Moisture/Frost Inside Refrigerator

Moisture collects on inside of refrigerator walls.

· Weather is hot and humid. · The rate of frost buildup and internal sweating increases.

· Flipper mullion

· Adjust flipper mullion. (See “Flipper Mullion” in INSTALLATION.)

Water

· Vegetables contain and

collects on

give off moisture.

bottom side

of drawer

cover.

· It is not unusual to have moisture on the bottom side of the cover.
· Both crispers contain an automatic humidity control, which should adjust automatically to the varying levels of moisture inside the drawer without creating additional condensation or drying out the air inside the crisper drawer, works with various types of produce. If excess moisture is noticed, check to verify humidity membrane is not damaged and replace as necessary.

Water collects in bottom of drawer.

· Washed vegetables and fruit drain while in the drawer.

· Dry items before putting them in the drawer. Water collecting in bottom of drawer is normal.

Water/Moisture/Frost Outside Refrigerator

Moisture collects on outside of refrigerator or between doors.

· Weather is humid.

· This is normal in humid weather. When humidity is lower, the moisture should disappear.

Food/Drinks in Fresh Food Compartment

Food is freezing.

· Temperature setting is too low.

· Move the setting to a higher degree.

· Temperature sensor is · Allow space for air flow to the sensor. covered by food (right side of fresh food area).

· Food is covering the air ports.

· Allow space between the air ports and the food.

LIMITED WARRANTY

29

Your appliance is covered by a one year limited warranty. For one year from your date of delivery, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.
Exclusions
This warranty does not cover the following: 1. Products with original serial numbers that have been removed, altered or cannot be readily determined. 2. Product that has been transferred from its original owner to another party or removed outside the USA or Canada. 3. Rust on the interior or exterior of the unit. 4. Products purchased “as-is” are not covered by this warranty. 5. Food loss due to any refrigerator or freezer failures. 6. Products used in a commercial setting. 7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions. 8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance. 9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory. 10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other cosmetic parts. 11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska. 12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors, cabinets, walls, etc. 13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
If You Need Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice.

USA 1-800-374-4432 Frigidaire 10200 David Taylor Drive Charlotte, NC 28262

Canada 1.800.265.8352 Electrolux Canada Corp. 5855 Terry Fox Way Mississauga, Ontario, Canada
L5V 3E4

welcome home
Our home is your home. Visit us if you need help with any of these things:
owner support accessories service registration
(See your registration card for more information.) Frigidaire.com 1-800-374-4432 Frigidaire.ca 1-800-265-8352

References

• Home - AIRE Rafts
• Kitchen, Laundry, Home Appliances & Accessories | Frigidaire
• Kosher Certificates | Kosher Certification | STAR-K
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>