Yasashi 3447622 Air Activated Push Switch Button for Garbage Disposal Bathtub Hose Kit Instruction Manual
- July 19, 2024
- Yasashi
Table of Contents
Yasashi 3447622 Air Activated Push Switch Button for Garbage Disposal
Bathtub Hose Kit
Assembly Instruction
- Identify all components are present prior to installation.
- Place waste flange (1) and rubber washer (2) into the basin hole.
- Install the rubber washer (3) and backnut (4), then tighten the back nut.
- Check all joints and connections for leaks. If necessary, use the sealant.
- Clean with warm soapy water only.
Diagram Description
The diagram shows a cross-sectional view of the assembly process for a basin waste flange. The components are labeled with numbers corresponding to the list below:
- 1: Waste flange
- 2: Rubber washer
- 3: Rubber washer
- 4: Backnut
Specifications
| Dimension | Value |
|---|---|
| Width | 148.00 mm |
| Height | 210.00 mm |
Components List
| Component | Quantity |
|---|---|
| Waste flange | 1 |
| Rubber washer | 1 |
| Rubber washer | 1 |
| Backnut | 1 |
FAQ
Q: What should I do if a component is missing?
A: Contact the supplier or manufacturer for a replacement.
Q: Can I use any type of sealant?
A: It is recommended to use a sealant suitable for plumbing fixtures.
Q: How do I clean the assembly?
A: Clean with warm soapy water only.
Q: What should I do if there are leaks after installation?
A: Check all joints and connections for proper tightening and apply
sealant if necessary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>