beko VRW 80318 VB Wet and Dry Upright Vacuum Cleaner User Manual

Wet & Dry Upright Vacuum Cleaner
User Manual VRW 80318 VB 01M-8914843200-2823-01

VRW 80318 VB Wet and Dry Upright Vacuum Cleaner

Please read this guide first!
Dear Customer,
Thank you for choosing a Beko product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with the state of the art technology. Please make sure you read and understand this guide and  upplementary documentation fully before use and keep it as a reference. Include this guide with the unit if you hand it over to someone else. Observe all warnings and information herein and follow the instructions.
Symbols and their meanings
These symbols are used in this manual:

| Important information and advice on using the device.
---|---
| CAUTION: Warnings against personal injury and property damage.
| Protection class against electric shock.

Important safety and environmental instructions

1.1 General safety
To reduce the risk of fire, electric shock or injury, please follow these requirements:
Children under 8 years of age should not use this product. Adults with disabilities, mental illness, or lack of sensory experience and knowledge should use this device properly and safely under the supervision of normal adults and be aware of the potential risks. Children should not use the product alone and should not clean and maintain the product without adult supervision;

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they havebeen given supervision orinstruction concerning useof the appliance by a person responsible for theirsafety.

• This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  Children shall not playwith the appliance. Cleaning and user maintenanceshall not be made by children without supervision.

• Please store the applianceindoor to avoid being wet;

• Please do not immersethe machine in water orother liquids;

• Please do not use the appliance with wet hands;

• Please do not use the appliance If it falls, breaks, orfalls into the water, please send the appliance to an authorized aftersales ser- vice center for repair;

• Please do not use the appliance if the power cordor plug is damaged;

• Please pull out the cablegently;

• Please do not damage the power cord: Do not lift the appliance with powercord, or clamp the power cord, or pull the power cord to a sharp edge or corner. Do not use the appliance over the power cord. Keep cables away from heated surfaces;

• Please do not use extension cords. The plug should be directly inserted into the power socket;

• Please do not block the inlet of the appliance to avoid limiting the airflow;

• Please do not operate the appliance when the inlet is blocked;

• Please keep hair, loose clothing, fingers or any part of the body away from the inlet to avoid the risk of danger;

• Please do not clean up anything that is burning or smoking, such as cigarettes, matches or hot ashes;

• Please do not clean up any flammable substances,  such as lighter fluid, gasoline or kerosene, or in the case of explosive liquid or steam;

• Please do not clean upany paint, paint thinner,some mothproof materials or vapors released byflammable dust or otherexplosive or toxic vapors;

• Please do not clean upany toxic substances,such as chlorine bleach,ammonia, pipe dredge orgasoline;

• Please do not operate the appliance for any otherpurpose not listed in thisManual;

• Please use accessories only recommended by the manufacturer. Usingparts not provided or sold by the manufacturer may cause fire, electric shockor injury;

• Please use the officialpower cord;

• Please avoid dust, lint,hair and other materialaccumulating the inlet;

• Please clean up the stairs carefully;

• If the adapter is damaged, it must be replaced by an official maintenance department from the manufacturer;

• Please make sure to install the water tank and the brush roll properly;

• Please do not operate or store the appliance under inappropriate conditions such as high temperature or low humidity. Please store the appliance in a ventilated place to avoid direct sunlight;

• Please keep children away from the appliance when the appliance is powered on or cooling down;

• Please do not clean up on leather, waxed furniture or floors, synthetic fibers, velvet or other vulnerable and steam sensitive ma- terials;

• Keep fingers, hair and loose clothing from moving parts and openings whilst using product.

• Children should be supervised to ensure that they do not play with the appliance.

• If the supply cord is damaged, it must be replaced by the manufacturer or its agent or similarly qualified person in order to avoid hazard.

• Motorized cleaning head for water suction cleaning.

• WARNING: For the purposes of recharging the battery, only use the de- tachable supply unit ZD- 024M220100EU provided with this appliance.

1.2 Compliance with the WEEE
Directive and disposal of the waste product
** This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to offical collection point for recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was puchased.
Each household performs important role in recovering and recycling of old appliance.
Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.
1.3 Packaging information
** Package of the product is made of recy clable materials in accordance with our National Legislation. Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packag ing material collection points designated by the local authorities.
1.4 Waste batteries
** This symbol on rechargeable batteries/ batteries or on the packaging indicates that the rechargeable battery/battery may not be disposed of with regular house hold rubbish. For certain rechargeable batteries/bat- teries, this symbol may be sup plemented by a chemical symbol. Symbols for mer cury (Hg) or lead (Pb) are provided if the rechargeable batteries/batteries contain more than 0,0005 % mercury or more than 0,004 % lead.
Rechargeable batteries/batteries, including those which do not contain heavy metal, may not be disposed of with household waste.
Always dispose of used batteries in accordance with local environmental regulations.
Make enquiries about the applicable disposal regulations where you live.
1.5 Actions to be taken for energy saving**

• To avoid redundant energy consumption while using the device, set the speed levels according to the floor you are sweeping.
• Under normal conditions, low speeds are used to clean the hard floors, curtains and sofas, and high speeds are used to clean the carpets.

1.6 Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Overview

2.1 Controls and components

1. Roller brush; water level and engine speed adjustment button
2. Handle on-off button
3. Roller brush cleaning button
4. Handle
5. Information display
6. Dirty water tank HEPA 10 filter
7. Dirty water tank
8. Floor cleaning roller brush cover
9. Floor cleaning roller brush cover (x2)
10. Rear casing on – off switch
11. Clean water tank
12. Charge and park stand
13. Dirty water tank cleaning brush
14. Charge adaptor
15. Spare HEPA 10 filter

2.2 Technical data

2.3 Product Specifications
This device has three functions: Vacuuming;
Mop and Self-cleaning.
Clean Water Tank Capacity:740 ml
Dirty Water Tank Capacity: 500 ml

External Power Supply Parameter

• WARNING! Only use water below 25°. Do not use boiling water.

Values supplied with the instrument or accompanying documentation are laboratory readings per relevant standards. These values may differ depending on operation and ambient conditions.
2.3.1 Floor Surface Cleaning
The product is equipped with a clean water tank, dirty water tank, floor cleaning roller brush, motors and other functional modules. Water is pumped into the floor-cleaning roller brush, and the floor-cleaning motor makes it spin at high speed to clean surfaces. After cleaning the floor, the dirty water is sucked by the suction motor and drawn back into the dirty water tank. During the floor cleaning process, the level of spraying water on the cleaning roller brush can be adjusted or cancelled.
2.4 Product Introduction

• “MODE” Roller Brush Water Level and Motor Speed Adjustment Button: When the Floor Cleaning Machine is turned on with the on/off button, the Floor cleaning roller brush water level and motor suction speed work in the Minimum Position. This appears on the information display.
• When the MODE button is pressed again while the product is operating in minimum mode, The floor cleaning roller brush level and the motor suction level rise to the Maximum position. This appears on the information display. When MODE key is pressed again in Maximum position; The roller water spray level on the information screen disappears. The Water spray is cancelled. When you cancel the water spray function of the roller brush, It is used to extract liquid from the wet floor, sweep the damp floor by mopping and sweep the carpet floors.
• “ ” Handle On/Off Button: (2) When you press the handle on/off button, the product starts to operate at minimum engine speed and water spraying. • While the product is running (2), if you press the handle on-off button again, the product turns off by operating at high speed for about 3 seconds.
• “ ” Floor Cleaning Roller cleaning button: as soon as the cleaning process is comple- ted and you park the product on the charging stand and start charging, the floor cleaning roller icon starts to flash on the display. (Before pressing the floor cleaning button on the handle (3), empty the dirty water tank and check that the clean water tank is full.) Press the floor cleaning roller button and start the roller cleaning process. After the cleaning is completed, the product will stop by itself, the red light will illuminate the display, and the icon will come on, reminding you to empty the dirty water tank and fill it. This red icon will turn off when you empty the dirty water tank and fill the clean water tank.

Installation

3.1 Handle mounting

Place the handle vertically on the body.
The assembly will be completed after a “click” is heard.
Press the tab under the handle to remove the handle and pull it upwards.
3.2 Clean water tank mounting Place the clean water tank on the back of the body.
Assembly will be completed after a “click” is heard.
3.3 Roller brush cover mounting Removal:
Press the unlock button on the top cover of the floor brush with your finger and pull up to remove the top cover of the floor brush.
Installation:
Fit the top cover tabs into the grooves in front of the roller brush and press the cover firmly. Installation is complete when a “click” is heard.
3.4 Roller brush cover removal and mounting Removal:
Unlock the roller brush by pressing the left button and pulling the roller brush upwards.
Installation:
Place the roller brush on the right wheel axle and press the roller brush down. The roller brush unlock button is equipped with a push button for positioning, and assembly is complete when a “click” is heard.
When using the brush on the carpet, turning off the water spray function is recommended.

Operation

4.1 How to Operate
If water is left on the floor after cleaning, it is recommended to use the dry mode to clean the water.
WARNING! Use only with recommended low foaming detergent. Simply add a few drops (10 ml) of the recommended floor cleaner to the clean water tank. If unexpected foaming occurs, the amount of detergent should be reduced. The foam formed may reduce the performance of your device.Clean water tank filling;
Open the clean water tank to add water.
Power On:
Tilt the body of the device towards yourself. Press the on / off button to operate.
The product will commence working with the engine and water spray in the minimum position.
Mode Switch:
Adjust the water spray level according to actual cleaning needs. WARNING! Please press this button to turn off the device in unexpected situations, such as automatic power on.

**| WARNING! The Product will not operate when the on / off switch on the rear body is not turned on.
Ensure this switch is on when your product is not operated from the handle.
---|---
**| WARNING! Do not tilt the device entirely while water is in the dirty tank during use. Otherwise, water may leak from the brush section.
| Please ensure the clean water tank is full and the dirty container is empty so the roller brush can clean itself.

4.2 Roller brush cleaning As soon as the cleaning process is completed and the product is parked on the charging stand, and charging starts, the floor cleaning roller icon starts to flash on the display.
(Before pressing the floor cleaning button on the handle (3), check that the dirty water tank is empty and the clean water tank is full.)
Press the floor cleaning roller button on the handle and start the roller cleaning process. After the cleaning, the product will stop by itself, the red light will flash on the screen, and the icon will be activated, reminding that the dirty water tank should be emptied and the clean water tank should be filled.
This red icon will turn off when you empty the dirty water tank and fill the clean water tank.
When the roller brush cleaning process is finished, removing the floor cleaning roller and drying it in a ventilated place is recommended. Drying the roller brush prevents the formation of odour on the brush.
4.3 Roller cleaning mode operation method:

1. After the floor cleaning, please turn off the device and park it in the charging stand.
2. The roll cleaning icon starts to flash on the product information display.
3. Press the roller cleaning button on the handle (3) for a second or two to start the roller cleaning program.
4. When the roller cleaning process is finished, the red water discharge icon will appear on the information display.
5. Empty the dirty water tank and clean the filter coming out of the tank.
6. After emptying the dirty water tank and filling the clean water tank, the red icon on the screen will turn off.
7. The blue charging information icon on the information screen will continue to light.

| If you want to repeat the roller cleaning process, repeat steps 4.3 in the manual.
Before repeating these steps, ensure the dirty water tank is empty and the clean water tank is full.
---|---
| If the product is taken from the charging stand during the roll cleaning step, or if the charging stand adapter is unplugged or the power is cut off, the roll cleaning step will end within 15-20 seconds.
| When plugged back in the following days, if the product is in the storage station, the self-cleaning light will flash, and the process can begin with the steps above.

4.4 Cleaning the dirty water tank

Step 1:
Press the dirty water tank latch to remove the dirty water tank.
Step 2:
Remove the dirty water tank by pulling up the hepa filter cassette and the dirty water tank float.
Empty and clean the dirty water tank after each use. If not using it long, dry the dirty water tank to prevent foul odour.
Step 3:
Open the cover on the dirty water tank float. Large dust and dirt particles in the dirty water tank accumulate here.
Clean it and place it in the dirty water tank.
4.5 Information display Water level and engine speed indicator light :
The roller water level and engine speed indicator icon light up in white.
Roller brush error notification light:
It flashes three times and turns red continuously when hair, rope or any object prevents it from spinning around the Roller Brush. It turns off when the cause that prevents the roller brush from rotating is removed.
Charge level information icon:
Lights up blue when the charging adapter is plugged in.
Roller brush cleaning light:
After the floor cleaning process is completed, it lights up white when the product is parked on the charging stand.
Dirty water tank indicator light:
When the dirt tank is full, the red alarm light flashes three times and then turns on steadily.
Clean Water Tank Indication Light:
When the dirty water tank reaches its maximum level, it flashes 3 times and then turns on red steadily. The light turns off when the dirty water tank is emptied.

Cleaning and maintenance

5.1 Cleaning of the brush WARNING! When cleaning the shown area of the brush, please use a cleaning brush and avoid cleaning it with your hands. It can hurt fingers.
WARNING! After removing the roller brush, use the multi-purpose cleaning brush to clean the suction path opening. Avoid cleaning with bare hands; you may hurt your hand and fingers.Deep cleaning of the roller brush cylinder is recommended every four or five uses. Use the multipurpose cleaning brush to remove hair and other objects tangled in the brush roll. After cleaning and washing the brush roll, allow it to dry in a well-ventilated area for 24-48 hours.
Uncomfortable odours may occur in roller brushes that are not dried.
Please rinse the brush roll cover when needed
5.2 Cleaning the Filter Wash and dry the HEPA filter to prevent air infiltration.
5.3 Cleaning the charging stand Please clean the bottom surface of the charging stand with clean water and dry it if it will not be used for a long time after the roller brush cleaning process. If the wet bottom surface and the roller brush are not dried, this may cause bad odour formation.
5.4 Filtration Replacement Guide Press the dirty water tank latch to remove the dirty water tank. Remove the Dirty Water tank by pulling it towards yourself.
Remove the Dirty Water tank HEPA Filter cassette and the Dirty Water Container float by pulling upwards. Empty and clean the Dirty Water tank. If not using it long, dry the dirty water tank to prevent foul odour.
Pull out the HEPA Filter.
Wash and dry.
Open the Cover on the Dirty Water Tank Float. Large dust and dirt particles in the Dirty Water tank accumulate here.
Clean it and place it in the dirty water tank.
For a better user experience, replacing the filter every 2-3 months (based on daily usage frequency) is recommended.
Thoroughly clean and dry the filters, washing head and cover after each use. Make sure the parts are installed correctly.
A spare dry filter is supplied with your device for easy replacement.

Problems and remedies

cable firmly
Roller Brush Cylinder does not rotate.| Restart after cleaning the brush roll
Full Dirty Water Tank| Clean Roller Brush Restart.
Weakened suction| The brush roll is entangled with hair and other objects| Empty and clean the dirty water tank and restart
Abnormal noise during operation| Objects tangled in the Roller Brush caused noise and
blocked brush.| Clean the roller brush with the multi-purpose brush and restart.

CAUTION: If the product cannot operate normally as per the above steps, please contact our aftersales service department for assistance.

Keep the product’s battery fully charged when not in use for a long time.

www.beko.com

Documents / Resources

| beko VRW 80318 VB Wet and Dry Upright Vacuum Cleaner [pdf] User Manual
VRW 80318 VB Wet and Dry Upright Vacuum Cleaner, VRW 80318, VB Wet and Dry Upright Vacuum Cleaner, Dry Upright Vacuum Cleaner, Vacuum Cleaner
---|---

References

• Arctic Romania - Electrocasnice pentru intreaga familie
• Beko Global
• Beko Romania - Electrocasnice cu Tehnologii Ingenioase

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>