TUMAN Pro HLV-1 Portable Speaker User Manual

TUMAN Pro HLV-1 Portable Speaker

Product Usage Instructions

This device is designed to comply with FCC regulations and provide reliable operation. Please follow the guidelines below for proper usage:

Installation

1. Ensure the device is placed in a suitable location.
2. Connect the device to a power outlet as instructed.
3. Follow any specific installation instructions provided with the device.

Operation

1. Turn on the device using the designated power button.
2. Follow any user interface prompts on the device’s display, if applicable.
3. Use the device according to its intended purpose and functions.

Maintenance

1. Keep the device clean and free from dust or debris.
2. Avoid exposing the device to extreme temperatures or moisture.
3. Refer to the user manual for any specific maintenance requirements.

FAQ

• Q: What should I do if the device causes interference?
• A: If interference occurs, you can try the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a different circuit than the receiver.
  • Consult the dealer or an experienced radio/TV technician for assistance.
• Q : Can the device be used without restrictions in terms of RF exposure?
• A: Yes, the device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Features

• Enjoy your music on the go, everywhere you go.
• Easy connection to smartphones, players, etc.
• Two microphones, karaoke with friends anytime. anywhere.
• 10 modes of funny sound effects, change your voice to any style you like.
• Support AUX input, TF card, and USB, and enjoy music in various ways.
• Support music format: MP3, WMA.
• Built-in efficient and safe Li-ion battery which gives you much more fun outdoors.

Package Contents

• Portable Speaker
• 1 Type-c USB charging cable.
• 1 Audio cable.
• 1 User manual
• 2 Microphones

Identification Parts

Buttons

Pairing with mobile phone

• Ensure your mobile is enabled with the BT function. Turn on your mobile phone BT. search for available devices, and click the speaker model number to connect.

Operate FM Radio

• Connect the AUX cable included with a speaker as an antenna.
• Press “M” button to switch to FM mode.
• Long press” “button to automatically search for available channels. When the search is finished, it will start to play the first channel.
• Press ” ” to browse and select channels.

LED Light

• Short press to change the LED light mode.
• Long press to turn off the LED light.

Short-cut Key

• Short-click”   “button to play or pause music.
• Double-click ” ” button to dial back the last called-out number.
• Long press the”   ” button to get disconnected

Microphone Features

Troubleshooting

1. What should I do if the speaker cannot pair with my device and play music accordingly? Please check the specification /the manual of the device(your mobile or computer), and see if the device is BT enabled.
2. What should I do if the TF card can not work?
3. Ensure that the TF card is in good condition. Also, check that the audio files are in the correct formats.
4. The problem may also occur due to incompatibility of the TF card. We recommend you format the TF card to FAT 32 formats.
5. I’m using FM mode but the speaker cannot receive any radio channel. How can I improve the speaker’s FM signal strength? Make sure you’re using the speaker in a place covered by FM signals. Please connect the AUX cable to the speaker. It acts as an external antenna to enhance the FM Radio signal. You can adjust the speaker in different positions and directions to get a better signal.

General Maintenance

To avoid damage or failure:

• It is strictly prohibited to expose the speaker in places with high temperatures, e.g. places near the heating device or car with direct sunlight.
• It is strictly prohibited to dip the speaker into water.
• It is strictly prohibited to use the cleanser including alcohol, ammonia, benzene, or abrasive. If needed, please clean it with a piece of wet soft cloth. Operating and storage temperature:
• It is strictly prohibited to operate and store the speaker in places with temperatures lower than -25° C or higher than 55° C. Low temperatures will shorten the lifespan of the battery.

Technical Specifications

Functions

| Support wireless, LINE IN, TF card, USB, FM Radio, hands-free, Karaoke, EQ, RGB LED
Materials| ABS+Net cloth+ iron net
Speaker Dimensions| 258138227mm
Speaker Weight| 1.87kg
Microphones Dimensions| 173.SSOSOmm
Microphones Weight| 118g

WARNING

1. The working voltage is 5V( tolerance is +0.2V). Misuse of this could cause a fire hazard and other safety risks. No liability or responsibility is accepted by us for the usage of exceeding this voltage range( eg. the working voltage for fast charging is 5V).
2. Disassembly ONLY by the professionals.
3. Stay away from the fire.

FCC STATEMENT

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>