Panasonic FV-0511VK3 Whisper Green Select Ventilating Fan Owner’s Manual

Panasonic FV-0511VK3 Whisper Green Select Ventilating Fan

WARNING

This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.

IMPORTANT SAFETY NOTICE

There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design without the manufacturer’s approval. Please have a static electricity depletion process in place before handling these components.. Please use gloves when handling PCB parts during the repair process..

Specification

Model No.| Air direction| Voltage
M| Frequency (Hz)| Duct diameter (inches)| Air volume at 0.1″WG (CFM)| Noise (sanes)| Speed (rpm)| Power fYV)| Weight lb.{ kg)
---|---|---|---|---|---|---|---|---|---
Fan
FV-0511VK3| Exhaust| 120| 60| 4| 110| <0.3| 782| 9.7| 7.75 (3.5)
80| <0.3| 684| 5.6
50| <0.3| 630| 3.8
6| 110| <0.3| 595| 6.7
80| <0.3| 569| 4.4
50| <0.3| 575| 3.4

HVI Certified performance based on HVI Procedures 915,916, and 920.

Parts Identification

Main Body Section

Power PCB Assy

Main PCB Assy

Packing Section

Main Label

SCAN CODE FOR WIRING INSTRUCTIONS

WARNING:

1. Before service or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally.
2. Acceptable for use over a bathtub or shower when installed in a GFCI protected branch circuit.

CAUTION:

To reduce the risk of injury to persons, install fan at least 2.1 m(7 feet) above the floor.

Wiring Diagram

Use signal switch for manual control of high / low CFM mode: ON to use Pick-A-Flow® setting (high speed/ CFM); OFF to • , use Multi-speed module setting {low speed / CFM)
 Do not connect the red signal wires to a live power supply (AC 120 V 60 Hz J because it will damage the product. Please use an optional switch to connect the red signal wires.

Parts List

Main Body Section

Main PCB Section

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>