HYBE ATNN22JOS901NN0 Official Light Stick User Guide

HYBE ATNN22JOS901NN0 Official Light Stick

Overview

Inserting and replacing the batteries

1. Inserting and replacing the batteries
2. Turn the battery cover of the product handle to take out the battery holder inside.
3. Insert 3 alkaline batteries (AAA) into the battery holder as shown in the picture.
4. When connecting the batteries, please check the anode and cathode.
5. The spring part of the battery holder is the cathode of the battery, and the part without a spring is the anode.
6. Insert the battery holder combined with the battery in the direction of the arrow marked on the handle of the product, and close the battery cover.

Turning the product on or off

• Press and hold the Button to turn on the product.
• When the product is powered on, it enters Basic mode.
• Press and hold Button to turn off the product.

Using Basic mode

• Press the Button to change the LED color. (White>Red > Yellow>Green> Blue> Pink)
• Press the Button to change the LED blinking speed.
• The speed is repeated in the order Slow> Normal >Quick> Light on (Blink off).
• Press and hold the Button to switch to Color shaking mode.

Using Color shaking mode

• Press and hold the Button while the product is on to switch to Color shaking mode.
• The LED changes color every time you shake the product (White Red> Yellow >Green> Blue> Pink).
• Press and hold the Button to switch to Basic mode.

Using Bluetooth mode

• Turn on the smartphone’s Bluetooth mode and press and holdthe  Button and simultaneously.
• The LED flashes blue and attempts to connect to the smartphone via Bluetooth.
• When the Bluetooth connection is complete, the LED color will change to the color you set in the app.
• Press and holdthe  Button and simultaneously to switch to Basic mode.

Note

1. The button is not operated in Bluetooth mode, and it does not indicate performance problems.
2. When connecting to Bluetooth, the connection between the smartphone and Bluetooth may be lost intermittently during use.
3. Bluetooth only supports BLUETOOTH 4.2 or higher.

Using Performance mode (Central control mode)

• Map your ticket information to use Performance mode in offine concerts. When mapping, map your ticket information directly through a dedicated app or visit the HELP DESK (Pairing booth) in the concert hall. After pairing, turn on the product enters
• Performance mode (Central control mode).

Note

• The button is not operated in Performance mode, and it does not indicate performance problems.
• If you cannot pair your smartphone with the product, visit the HELP DESK (Pairing booth) in the concert hall.

Precautions for handling

1. Avoid hot and humid places and keep it at room temperature when storing
2. Avoid looking directly at the LED light up close.
3. Please note that dropping the product or applying an excessive impact may affect the color of the LED.
4. Be careful not to swallow the parts or put them in your mouth.
5. Be careful as it may cause malfunction if a strong impact is applied to the product or if it meets water.
6. If the product is damaged, stop using it and do not arbitrarily disassemble, repair or modify the product.
7. When the battery life is over, use a new battery, and when not in use for a long time, remove the battery.
8. Keep the used batteries out of reach of infants and children or dispose of them at a designated disposal site.
9. Use genuine AAA batteries and be sure to checkthe  anode and cathode when inserting the battery. Otherwise, there is a risk of product damage, burn,s and fire.
10. This product may cause confusion during wireless operation.

Product Warranty

1. This product is manufactured through a strict quality control and inspection process.
2. In the event of a breakdown during the normal use of the consumer, we provide free repair during the warranty period.
3. When requesting repairs, be sure to present this warranty.
4. The warranty is valid only for purchases made through an official dealer, so please keep the purchase receipt.
5. The warranty period is 3 months from the date of purchase.

Failures caused by consumer negligence is not covered by quality assurance.

Paid A/S processing regulations

1. When the warranty period has elapsed.
2. In case of failure or damage due to excessive use or carelessness.
3. In case of failure due to natural disasters such as flood, fire, earthquake, etc.
4. If you want to replace the case due to scratches that occurred during use.
5. In case of using an AS center other than the official A/S center or disassembling, repairing, or remodeling the product at will.

Product specifications

FCC STATEMENT

This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses, radiate radio frequency energy but if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with partl5 of FCC rules.

Operation is subject to the following two conditions

• This device may not cause harmful interference.
• This device and its accessories must accept any interference received, including interference that may cause undesired operation.

Product Partl5.21 statement

Changes or modifications not expressly approved by the manufacturer (or party responsible) for compliance could void the user’s authority to operate the equipment.

A/S address, contact information and email HYBE Co.,Ltd.
+82)02-3444-0105
[email protected]
Warranty period:3 months from the date of purchase (Receipt certification required)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>