SOUND CRUSH EL225 10W Bluetooth TWS Speaker User Manual
- July 16, 2024
- SOUND CRUSH
Table of Contents
EL225 10W Bluetooth TWS Speaker
“`html
Specifications:
- Model: EL225
- Power Output: 10W
- Connectivity: Bluetooth TWS
- Charging Port: Type-C (5V / 1000mA)
- Charging Time: 3-4 hours
Product Overview:
- ON/OFF and TWS button
- Single press for volume down / Hold for previous track
- Single press for volume up / Hold for next track
- Type-C charge port (5V / 1000mA)
- Charge LED indicator
- Red LED indicates the unit is charging
- Red LED will turn off when fully charged
Product Usage Instructions:
Charging:
-
Use the included Type-C cable to connect the speaker to a USB
powered port. -
The battery is fully charged in 3-4 hours. Charge time may be
longer if the speaker is being used during charging. -
The red LED light indicates charging status. It turns off when
the battery is fully charged.
Troubleshooting:
Issue | Possible solution |
---|---|
No power | Make sure the speaker is turned on and fully charged. |
No Sound |
- Ensure the speaker volume is not at the lowest setting.
- Check if the connected audio device is playing audio.
Sound is distorted| Turn down the volume of the speaker or the connected
device.
Cannot pair the speaker with my Bluetooth device|
-
Ensure Bluetooth mode on your device is turned on.
-
Move your Bluetooth device closer to the speaker if out of
range. -
Avoid electromagnetic interference by moving devices away from
speaker.
Cautions:
-
Avoid leaving the speaker near heat sources.
-
Do not expose the speaker to very high temperatures or static
electricity. -
Store the speaker at room temperature and follow proper battery
charging guidelines. -
Dispose of the speaker following battery waste recycling
guidelines.
Frequently Asked Questions (FAQ):
Q: How long does it take to fully charge the speaker?
A: The battery is fully charged in 3-4 hours. Charge time may
vary if the speaker is in use during charging.
Q: What does the red LED indicator signify?
A: The red LED indicates that the unit is charging. It will turn
off when the battery is fully charged.
Q: How can I troubleshoot if there’s no sound from the
speaker?
A: Ensure that the speaker volume is not at the lowest setting
and that the connected audio device is playing audio.
“`
EL225 10W Bluetooth TWS Speaker
In the box
EL225 10W Bluetooth TWS Speaker, Users manual, Type-C charge cable
Product Overview 1. ON/OFF and TWS button 2. Single press for volume down /
Hold for previous track 3. Single press for volume up / Hold for next track 4.
Type-C charge port (5V / 1000mA) 5. Charge LED indicator
– Red LED indicates the unit is charging – Red LED will turn off when fully
charged
Charging 1. Use the included Type-C cable to connect speaker and a USB powered
port. 2. The battery is fully charged in 3-4 hours. (Charge time will be
longer if speaker is being used during charging). 3. The red LED light
indicates that the unit is charging. The red LED will turn off when the
battery is fully charged.
Bluetooth Play Mode 1. When using a Bluetooth enabled audio device, make sure
the distance to the speaker is within 10M. 2. Press and hold the Power button
to turn on the speaker. The unit will give a beeping sound to indicate it is
in Bluetooth mode. The LED will rapidly flash blue. 3. Enable Bluetooth on
your audio device. 4. Search for new device “EL225” and get paired, LED turns
on blue color. 5. Adjust the volume on your audio device to desired level.
Note: The speaker will automatically power off after 30 minutes if not in use
or music not being played.
TWS (True Wireless Stereo) Connection Two speakers can be synced and
connected. 1. Hold the Power button on each speaker to turn both speakers on.
2. Double press “Power/TWS” on both speakers to enter TWS mode. 3. You will
hear a beep when the two speakers are paired (10 sec.) 4. The LED on the
master speaker will be solid blue, while the LED on the second speaker will
flash blue. 5. On your audio device, turn Bluetooth on and follow normal
Bluetooth pairing instructions. Note: Once speakers have been paired via TWS,
they will pair again each time they are turned on. If you want to unpair them,
double press “Power/TWS” to disconnect. The speaker will beep and both LEDs
will flash indicating the speakers are no longer paired.
Troubleshooting Issue
Possible solution
No power
Make sure your speaker is turned on and make sure your speaker is completely charged.
No Sound
Make sure the volume of your speaker is not at the lowest setting.
Make sure the connected audio device is playing audio.
Sound
is
distorted
Cannot pair the
speaker with
my Bluetooth
device
Turn down the volume of speaker or the connected device.
Make sure Bluetooth mode on your device is turned on. Your Bluetooth device
may be out of range, try moving it closer to the speaker. Move your Bluetooth
device and/or speaker away from other devices that generate electromagnetic
interference, such as phones, microwave ovens, wireless network routers or
other Bluetooth devices.
To prevent the possibility of the battery from leaking, heating or catching
fire, please follow those precautions:
Please disconnect the charge cable after fully charged. Do not use or leave
the speaker near a heat source such as fire or heater. Do not hit or throw the
speaker.
Cautions Do not use or leave the speaker in very high temperatures. (i.e. in
direct sunlight or in a vehicle
in extremely hot conditions). Do not use the speaker where there is a lot of
static electricity, otherwise the safety devices
within the speaker can be damaged. The speaker should be stored at room
temperature. The speaker battery should be charged and discharged frequently
in order to activate the
restore of the battery’s energy. Please follow battery waste recycling
guidelines when disposing of the speaker.
Anychanges or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>