HDWR Global HD10D QR and Barcode Scanner User Manual
- July 16, 2024
- HDWR Global
Table of Contents
HDWR Global HD10D QR and Barcode Scanner
Specification
- Matrix: CMOS
- Processor: ARM Cortex 32-bit
- Scanning method: manually (on the button)/ automatically (after approaching the code)
- Scan confirmation: light and sound signal
- Scanning speed: 500 times/second
- Interface: USB
- Cord length: 140 cm
- Protection level: IP54
- Drop resistance: 2 meters
- Device dimensions: 16 x 9.5 x 6.5 cm
- Package dimensions: 18.5 x 12 x 8.5 cm
- Weight: 300 g
- Package weight: 360 g
- Operating temperature: -20 – 50°C
- Storage temperature: -40 – 60°C
- Humidity: 5 to 95%
- Read 1D codes: EAN-8, EAN-13, UPC-A, UPC-E, CODE 128, CODE 39, CODE 93, CODE 11, CHINESE 2 of 5, CODABAR, MSI, Interleaved 2 of 5 (ITF), others one-dimensional
- Readable 2D codes: QR, DataMatrix, PDF417, Aztec, Microcode
The set contains
- 2D Code Reader
- Reader stand
- Built-in USB communication cable
- Manual
Features
- Scan 1D and 2D barcodes such as QR codes
- Automatic Scanning of Code Labels
- Stable reader stand
- Ability to scan codes from LCD screens and mobile device displays
- Scanning inverted codes (white code on black background)
Default settings
If the scanner is not working properly for some reason, please scan the code above
Setting the End Mark
Restore default settings
If the scanner is not working properly for some reason, please scan the code
above
Buzzer Configuration
Barcode Scanning Mode
Case setting
Duplicate Code Scan Settings
Interface Configuration
For the barcode content “123456789”, add X and Y before the barcode (Check the ASCII barcode table, X=58, Y=59), and “XY123456789” will appear. Scan the codes below in order: “Prefix Display Enabled”, “Add Prefix”, Parameter Code “5”, “8”, “5”, “9”, and “Save Settings”.
Add a suffix
Adding a prefix
For the barcode content “123456789”, add X and Y after the barcode (check the ASCII barcode table, X=58, Y=59), and “123456789XY” will be displayed. Scan the code below in order: “Display suffix enabled”, “Add suffix”, “Parameter code”5”, “8”, “5”, “9”>”Save settings”
Removal of start and end marks
E.g. the barcode content is “123456789” If you want to set the scanner to remove the number 1, “23456789” will appear. Scan the code below in order: “Character removal enabled.” >”Removing characters before code”>”Parameter code “0”>”Parameter code “1”>”Save settings”
Numeric and alphabetic codes
Saving settings
ASCII Code Table
